next: BUG: sleeping function called from invalid context at block/blk-sysfs.c:766

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While running kselftest zram test cases on Linux next-20220324 the kernel BUG
reported on arm64 Qcom db845 development board.

metadata:
  git_ref: master
  git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
  git_sha: b61581ae229d8eb9f21f8753be3f4011f7692384
  git_describe: next-20220323
  kernel_version: 5.17.0
  kernel-config: https://builds.tuxbuild.com/26mKdspULB326eo6s22cXZzYhmt/config

Log:
[    0.000000] Linux version 5.17.0-next-20220323 (tuxmake@tuxmake)
(aarch64-linux-gnu-gcc (Debian 11.2.0-18) 11.2.0, GNU ld (GNU Binutils
for Debian) 2.38) #1 SMP PREEMPT @1648023452
[    0.000000] Machine model: Thundercomm Dragonboard 845c

# running zram tests
# --------------------
# create '1' zram device(s)
# zram load module successful
# set max_comp_streams to zram device(s)
# FAIL can't set max_streams '2', get
# /sys/block/zram0/max_comp_streams = '8' (1/1)
# z[  626.759707] zram0: detected capacity change from 0 to 4096
ram max streams: OK
# test that we can set compression algorithm
# supported algs: lzo [lzo-rle] lz4 lz4hc 842
# /sys/block/zram0/comp_algorithm = 'lzo' (1/1)
# zram set compression algorithm: OK
# set disk size to zram device(s)
# /sys/block/zram0/disksize = '2097152' (1/1)
# zram set disksizes: OK
# set memory limit to zram device(s)
# /sys/block/zram0/mem_limit = '2M' (1/1)
# zram set memory limit: OK
# make ext4 filesystem on /dev/zram0
# zram mkfs.ext4: OK
# mount /dev/zram0
[  626.812708] EXT4-fs (zram0): mounted filesystem without journal.
Quota mode: none.
[  626.820412] ext4 filesystem being mounted at
/opt/kselftests/default-in-kernel/zram/zram0 supports timestamps until
2038 (0x7fffffff)
# zram mount of zram device(s): OK
# fill zram0...
# zram0 can be filled with '1932' KB
# zram used 12M, zram disk sizes 2097152M
# zram compression ratio: 174762.66:1: OK
# zram cleanup
[  636.589363] zram0: detected capacity change from 4096 to 0
# zram rmmod zram
[  636.607315] zram: Removed device: zram0
[  636.682510] BUG: sleeping function called from invalid context at
block/blk-sysfs.c:766
[  636.690716] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid:
0, name: swapper/0
[  636.698836] preempt_count: 101, expected: 0
[  636.703169] RCU nest depth: 0, expected: 0
[  636.707410] INFO: lockdep is turned off.
[  636.711471] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-next-20220323 #1
[  636.718729] Hardware name: Thundercomm Dragonboard 845c (DT)
[  636.724485] Call trace:
[  636.726988]  dump_backtrace+0xc0/0x134
[  636.730823]  show_stack+0x24/0x7c
[  636.734210]  dump_stack_lvl+0x8c/0xb8
[  636.737949]  dump_stack+0x18/0x34
[  636.741333]  __might_resched+0x1c8/0x240
[  636.745334]  __might_sleep+0x5c/0x94
[  636.748981]  blk_release_queue+0x38/0x100
[  636.753070]  kobject_put+0xa4/0x210
[  636.756631]  blk_put_queue+0x20/0x30
[  636.760278]  blkg_free.part.0+0x68/0xa0
[  636.764191]  __blkg_release+0x50/0x74
[  636.767926]  rcu_core+0x410/0xb90
[  636.771316]  rcu_core_si+0x1c/0x2c
[  636.774789]  __do_softirq+0x14c/0x654
[  636.778522]  __irq_exit_rcu+0x17c/0x1b0
[  636.782436]  irq_exit_rcu+0x1c/0x44
[  636.785998]  el1_interrupt+0x38/0x64
[  636.789645]  el1h_64_irq_handler+0x18/0x24
[  636.793813]  el1h_64_irq+0x64/0x68
[  636.797284]  cpuidle_enter_state+0xe4/0x380
[  636.801544]  cpuidle_enter+0x44/0x5c
[  636.805191]  do_idle+0x240/0x2d0
[  636.808484]  cpu_startup_entry+0x34/0x3c
[  636.812479]  rest_init+0x1c8/0x2d0
[  636.815951]  arch_call_rest_init+0x1c/0x28
[  636.820126]  start_kernel+0x73c/0x77c
[  636.823861]  __primary_switched+0xc0/0xc8
# zram01 : [PASS]
#
# create '1' zram device(s)
[  636.859790] zram: Added device: zram0
# zram load module successful
# set max_comp_streams to zram device(s)
# FAIL can't set max_streams '2', get
# /sys/block/zram0/max_comp_streams = '[  637.901396] zram0: detected
capacity change from 0 to 2048
8' (1/1)
# zram max streams: OK
# set disk size to zram device(s)
# /sys/block/zram0/disksize = '1048576' (1/1)
# zram set disksizes: OK
# set memory limit to zram device(s)
# /sys/block/zram0/mem_limit = '1M' (1/1)
# zram set memory limit: OK
# make swap with zram device(s)
[  637.935258] Adding 1020k swap on /dev/zram0.  Priority:-2 extents:1
across:1020k SS
# done with /dev/zram0
# zram making zram mkswap and swapon: OK
# zram swapoff: OK
# zram cleanup
[  637.995603] zram0: detected capacity change from 2048 to 0
# zram rmmod zram
[  638.012764] zram: Removed device: zram0
[  638.110836] BUG: sleeping function called from invalid context at
block/blk-sysfs.c:766
[  638.118965] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid:
0, name: swapper/7
[  638.126928] preempt_count: 101, expected: 0
[  638.131179] RCU nest depth: 0, expected: 0
[  638.135349] INFO: lockdep is turned off.
[  638.139350] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G        W
  5.17.0-next-20220323 #1
[  638.147964] Hardware name: Thundercomm Dragonboard 845c (DT)
[  638.153687] Call trace:
[  638.156170]  dump_backtrace+0xc0/0x134
[  638.159977]  show_stack+0x24/0x7c
[  638.163332]  dump_stack_lvl+0x8c/0xb8
[  638.167049]  dump_stack+0x18/0x34
[  638.170408]  __might_resched+0x1c8/0x240
[  638.174387]  __might_sleep+0x5c/0x94
[  638.178004]  blk_release_queue+0x38/0x100
[  638.182071]  kobject_put+0xa4/0x210
[  638.185599]  blk_put_queue+0x20/0x30
[  638.189216]  blkg_free.part.0+0x68/0xa0
[  638.193106]  __blkg_release+0x50/0x74
[  638.196811]  rcu_core+0x410/0xb90
[  638.200168]  rcu_core_si+0x1c/0x2c
[  638.203612]  __do_softirq+0x14c/0x654
[  638.207314]  __irq_exit_rcu+0x17c/0x1b0
[  638.211196]  irq_exit_rcu+0x1c/0x44
[  638.214727]  el1_interrupt+0x38/0x64
[  638.218346]  el1h_64_irq_handler+0x18/0x24
[  638.222493]  el1h_64_irq+0x64/0x68
[  638.225934]  cpuidle_enter_state+0xe4/0x380
[  638.230170]  cpuidle_enter+0x44/0x5c
[  638.233787]  do_idle+0x240/0x2d0
[  638.237060]  cpu_startup_entry+0x34/0x3c
[  638.241034]  secondary_start_kernel+0x148/0x170
[  638.245616]  __secondary_switched+0xa0/0xa4
# zram02 : [PASS]

steps to produce:
   # cd  /opt/kselftests/default-in-kernel/zram/
   # ./zram.sh

Reported-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>


--
Linaro LKFT
https://lkft.linaro.org

[1] https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220323/testrun/8654494/suite/linux-log-parser/test/check-kernel-bug-4772266/log
[2] https://lkft.validation.linaro.org/scheduler/job/4772266#L5186



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux