On 22/03/2022 11:30, Hannes Reinecke wrote:
On 3/22/22 11:39, John Garry wrote:
Currently SCSI low-level drivers are required to manage tags for commands
which do not come via the block layer - libata internal commands would be
an example of one of these.
There was some work to provide "reserved commands" support in such series
as
https://lore.kernel.org/linux-scsi/20211125151048.103910-1-hare@xxxxxxx/
This was based on allocating a request for the lifetime of the "internal"
command.
This series tries to solve that problem by not just allocating the
request
but also sending it through the block layer, that being the normal flow
for a request. We need to do this as we may only poll completion of
requests through the block layer, so would need to do this for poll queue
support.
There is still scope to allocate commands just to get a tag as token as
that may suit some other scenarios, but it's not what we do here.
This series extends blk-mq to support a request queue having a custom set
of ops. In addition SCSI core code adds support for these type of
requests.
This series does not include SCSI core handling for enabling reserved
tags per tagset, but that would be easy to add.
Based on mkp-scsi 5.18/scsi-staging @ 66daf3e6b993
Please consider as an RFC for now. I think that the libata change has the
largest scope for improvement...
Grand seeing that someone is taking it up. Thanks for doing this!
But:
Allocating a queue for every request (eg in patch 3) is overkill. If we
want to go that route we should be allocating the queue upfront (eg when
creating the device itself), and then just referencing it.
For patch #3 I needed to allocate a separate request queue as the scsi
device is not created by that stage.
And then for other scenarios in which we allocate the separate request
queue, since the scheme here is to allocate a request queue with
different ops, we can't use the same scsi_device request queue.
note: As for allocating request queues for the lifetime of the host, we
need to remember that blk-mq fairly reserves a tag budget per request
queue, and it would be a waste to keep a budget just for these internal
commands. So that is why I only keep the request queues temporarily.
However, can't say I like this approach. I've been playing around with
supporting internal commands, and really found two constraints really
annoying:
- The tagset supports only _one_ set of payload via
blk_mq_rq_(to,from)_pdu().
This requires each request to be of the same type, and with that making
it really hard for re-purposing the request for internal usage. In the
end I settled by just keeping it and skipping the SCSI command field.
That sounds reasonable.
For this series I am just fixing up libsas, and libsas has a sas_task
per command already, so we can just allocate the sas_task separately and
use the host_scribble to point to the sas_task.
If we could have a distinct PDU type for internal commands I guess
things would be easier.
Other drivers can do something similar to above or use the scsi priv data.
- The number of reserved commands is static.
With that it's getting really hard using reserved commands with
low-queue depth devices like ATA; we only have 31 commands to work with,
and setting one or two aside for TMF is really making a difference
performance wise. It would be _awesome_ if we could allocate reserved
commands dynamically (ie just marking a command as 'reserved' once
allocated).
I see. So you want to allocate a request, mark as "internal", and then
we have a flag which can be used to decide which path we need to send it
on. eh, maybe scsi_cmnd.submitter could be used
Sure, it won't have the same guarantees as 'real' reserved commands, but
in most cases we don't actually need that.
Maybe these are some lines we could investigate?
Hmm?
Thanks,
John
