Re: zram corruption due to uninitialized do_swap_page fault

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 11, 2022 at 11:51 AM Ivan Babrou <ivan@xxxxxxxxxxxxxx> wrote:
>
> Hello,
>
> We're looking into using zram, but unfortunately we ran into some
> corruption issues. We've seen rocksdb complaining about "Corruption:
> bad entry in block", and we've also seen some coredumps that point at
> memory being zeroed out. One of our Rust processes coredumps contains
> a non-null pointer pointing at zero, among other things:
>
> * core::ptr::non_null::NonNull<u8> {pointer: 0x0}
>
> In fact, a whole bunch of memory around this pointer was all zeros.
>
> Disabling zram resolves all issues, and we can't reproduce any of
> these issues with other swap setups. I've tried adding crc32
> checksumming for pages that are compressed, but it didn't catch the
> issue either, even though userspace facing symptoms were present. My
> crc32 code doesn't touch ZRAM_SAME pages, though.
>
> Unfortunately, this isn't trivial to replicate, and I believe that it
> depends on zram used for swap specifically, not for zram as a block
> device. Specifically, swap_slot_free_notify looks suspicious.
>
> Here's a patch that I have to catch the issue in the act:
>
> diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> index 438ce34ee760..fea46a70a3c9 100644
> --- a/drivers/block/zram/zram_drv.c
> +++ b/drivers/block/zram/zram_drv.c
> @@ -1265,6 +1265,9 @@ static int __zram_bvec_read(struct zram *zram,
> struct page *page, u32 index,
>   unsigned long value;
>   void *mem;
>
> + if (WARN_ON(!handle && !zram_test_flag(zram, index, ZRAM_SAME)))
> + pr_warn("Page %u read from zram without previous write\n", index);
> +
>   value = handle ? zram_get_element(zram, index) : 0;
>   mem = kmap_atomic(page);
>   zram_fill_page(mem, PAGE_SIZE, value);
>
> In essence, it warns whenever a page is read from zram that was not
> previously written to. To make this work, one needs to zero out zram
> prior to running mkswap on it.
>
> I have prepared a GitHub repo with my observations and a reproduction:
>
> * https://github.com/bobrik/zram-corruptor
>
> I'm able to trigger the following in an aarch64 VM with two threads
> reading the same memory out of swap:
>
> [ 512.651752][ T7285] ------------[ cut here ]------------
> [ 512.652279][ T7285] WARNING: CPU: 0 PID: 7285 at
> drivers/block/zram/zram_drv.c:1285 __zram_bvec_read+0x28c/0x2e8 [zram]
> [ 512.653923][ T7285] Modules linked in: zram zsmalloc kheaders nfsv3
> nfs lockd grace sunrpc xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat
> nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
> nft_counter xt_addrtype nft_compat nf_tables nfnetlink bridge stp llc
> overlay xfs libcrc32c zstd zstd_compress af_packet aes_ce_blk
> aes_ce_cipher ghash_ce gf128mul virtio_net sha3_ce net_failover
> sha3_generic failover sha512_ce sha512_arm64 sha2_ce sha256_arm64
> virtio_mmio virtio_ring qemu_fw_cfg rtc_pl031 virtio fuse ip_tables
> x_tables ext4 mbcache crc16 jbd2 nvme nvme_core pci_host_generic
> pci_host_common unix [last unloaded: zsmalloc]
> [ 512.659238][ T7285] CPU: 0 PID: 7285 Comm: zram-corruptor Tainted: G
> W 5.16.0-ivan #1 0877d306c6dc0716835d43cafe4399473d09e406
> [ 512.660413][ T7285] Hardware name: linux,dummy-virt (DT)
> [ 512.661077][ T7285] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT
> -SSBS BTYPE=--)
> [ 512.661788][ T7285] pc : __zram_bvec_read+0x28c/0x2e8 [zram]
> [ 512.662099][ T7285] lr : zram_bvec_rw+0x70/0x204 [zram]
> [ 512.662422][ T7285] sp : ffffffc01018bac0
> [ 512.662720][ T7285] x29: ffffffc01018bae0 x28: ffffff9e4e725280 x27:
> ffffff9e4e725280
> [ 512.663122][ T7285] x26: ffffff9e4e725280 x25: 00000000000001f6 x24:
> 0000000100033e6c
> [ 512.663601][ T7285] x23: 00000000000001f6 x22: 0000000000000000 x21:
> fffffffe7a36d840
> [ 512.664252][ T7285] x20: 00000000000001f6 x19: ffffff9e69423c00 x18:
> ffffffc010711068
> [ 512.664812][ T7285] x17: 0000000000000008 x16: ffffffd34aed51bc x15:
> 0000000000000000
> [ 512.665507][ T7285] x14: 0000000000000a88 x13: 0000000000000000 x12:
> 0000000000000000
> [ 512.666183][ T7285] x11: 0000000100033e6c x10: ffffffc01091d000 x9 :
> 0000000001000000
> [ 512.666627][ T7285] x8 : 0000000000002f10 x7 : 80b75f8fb90b52c4 x6 :
> 051609fe50833de3
> [ 512.667276][ T7285] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
> 0000000000000000
> [ 512.667875][ T7285] x2 : 00000000000001f6 x1 : 00000000000001f6 x0 :
> ffffffd305b746af
> [ 512.668483][ T7285] Call trace:
> [ 512.668682][ T7285] __zram_bvec_read+0x28c/0x2e8 [zram
> 745969ed35ea0fb382bfd518d6f70e13966e9b52]
> [ 512.669405][ T7285] zram_bvec_rw+0x70/0x204 [zram
> 745969ed35ea0fb382bfd518d6f70e13966e9b52]
> [ 512.670066][ T7285] zram_rw_page+0xb4/0x16c [zram
> 745969ed35ea0fb382bfd518d6f70e13966e9b52]
> [ 512.670584][ T7285] bdev_read_page+0x74/0xac
> [ 512.670843][ T7285] swap_readpage+0x5c/0x2e4
> [ 512.671243][ T7285] do_swap_page+0x2f4/0x988
> [ 512.671560][ T7285] handle_pte_fault+0xcc/0x1fc
> [ 512.671935][ T7285] handle_mm_fault+0x284/0x4a8
> [ 512.672412][ T7285] do_page_fault+0x274/0x428
> [ 512.672704][ T7285] do_translation_fault+0x5c/0xf8
> [ 512.673083][ T7285] do_mem_abort+0x50/0xc8
> [ 512.673293][ T7285] el0_da+0x3c/0x74
> [ 512.673549][ T7285] el0t_64_sync_handler+0xc4/0xec
> [ 512.673972][ T7285] el0t_64_sync+0x1a4/0x1a8
> [ 512.674495][ T7285] ---[ end trace cf983b7507c20343 ]---
> [ 512.675359][ T7285] zram: Page 502 read from zram without previous write
>
> I can also trace accesses to zram to catch the unfortunate sequence:
>
> zram_bvec_write index = 502 [cpu = 3, tid = 7286]
> zram_free_page index = 502 [cpu = 3, tid = 7286]
> zram_bvec_read index = 502 [cpu = 3, tid = 7286]
> zram_free_page index = 502 [cpu = 3, tid = 7286] <-- problematic free
> zram_bvec_read index = 502 [cpu = 0, tid = 7285] <-- problematic read
>
> With stacks for zram_free_page:
>
> zram_bvec_write index = 502 [cpu = 3, tid = 7286]
> zram_free_page  index = 502 [cpu = 3, tid = 7286]
>
>         zram_free_page+0
>         $x.97+32
>         zram_rw_page+180
>         bdev_write_page+124
>         __swap_writepage+116
>         swap_writepage+160
>         pageout+284
>         shrink_page_list+2892
>         shrink_inactive_list+688
>         shrink_lruvec+360
>         shrink_node_memcgs+148
>         shrink_node+860
>         shrink_zones+368
>         do_try_to_free_pages+232
>         try_to_free_mem_cgroup_pages+292
>         try_charge_memcg+608
>
> zram_bvec_read  index = 502 [cpu = 3, tid = 7286]
> zram_free_page  index = 502 [cpu = 3, tid = 7286] <-- problematic free
>
>         zram_free_page+0
>         swap_range_free+220
>         swap_entry_free+244
>         swapcache_free_entries+152
>         free_swap_slot+288
>         __swap_entry_free+216
>         swap_free+108
>         do_swap_page+1776
>         handle_pte_fault+204
>         handle_mm_fault+644
>         do_page_fault+628
>         do_translation_fault+92
>         do_mem_abort+80
>         el0_da+60
>         el0t_64_sync_handler+196
>         el0t_64_sync+420
>
> zram_bvec_read  index = 502 [cpu = 0, tid = 7285] <-- problematic read
>
> The very last read is the same one that triggered the warning from my
> patch in dmesg. You can see that the slot is freed before reading by
> swapcache_free_entries. As far as I can see, only zram implements
> swap_slot_free_notify. Swapping in an uninitialized zram page results
> in all zeroes copied, which matches the symptoms.
>
> The issue doesn't reproduce if I pin both threads to the same CPU. It
> also doesn't reproduce with a single thread. All of this seems to
> point at some sort of race condition.
>
> I was able to reproduce this on x86_64 bare metal server as well.
>
> I'm happy to try out mitigation approaches for this. If my
> understanding here is incorrect, I'm also happy to try out patches
> that could help me catch the issue in the wild.

I poked around the swapping code a bit. In the failing read stack:

[ 1298.167823][ T7004]  swap_readpage+0x60/0x328
[ 1298.168317][ T7004]  do_swap_page+0x438/0x904

You can see that swap_readpage is only called from do_swap_page for
synchronous IO:

if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
    __swap_count(entry) == 1) {
    // ...
    if (page) {
        // ...
        swap_readpage(page, true);

See: https://elixir.bootlin.com/linux/v5.15.28/source/mm/memory.c#L3548

I looked around some more and found 0bcac06f27d7:

* mm, swap: skip swapcache for swapin of synchronous device

Zram is considered fast synchronous storage. Reverting that notion
makes my reproduction not complain anymore:

diff --git a/mm/swapfile.c b/mm/swapfile.c
index 22d10f713848..d125555a0836 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -3221,8 +3221,10 @@ SYSCALL_DEFINE2(swapon, const char __user *,
specialfile, int, swap_flags)
  if (p->bdev && blk_queue_stable_writes(p->bdev->bd_disk->queue))
  p->flags |= SWP_STABLE_WRITES;

+ /*
  if (p->bdev && p->bdev->bd_disk->fops->rw_page)
  p->flags |= SWP_SYNCHRONOUS_IO;
+ */

  if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
  int cpu;

Putting it back in makes my code complain once again.

Hopefully this provides a clue.



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux