Too large badblocks sysfs file (was: [PATCH v3 0/7] badblocks improvement for multiple bad block ranges)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all the kernel gurus, and folks in mailing lists,

This is a question about exporting 4KB+ text information via sysfs interface. I need advice on how to handle the problem.

Recently I work on the bad blocks API (block/badblocks.c) improvement, there is a sysfs file to export the bad block ranges for me raid. E.g for a md raid1 device, file
    /sys/block/md0/md/rd0/bad_blocks
may contain the following text content,
    64 32
   128 8
The above lines mean there are two bad block ranges, one starts at LBA 64, length 32 sectors, another one starts at LBA 128 and length 8 sectors. All the content is generated from the internal bad block records with 512 elements. In my testing the worst case only 185 from 512 records can be displayed via the sysfs file if the LBA string is very long, e.g.the following content,
  17668164135030776 512
  17668164135029776 512
  17668164135028776 512
  17668164135027776 512
  ... ...
The bad block ranges stored in internal bad blocks array are correct, but the output message is truncated. This is the problem I encountered.

I don't see sysfs has seq_file support (correct me if I am wrong), and I know it is improper to transfer 4KB+ text via sysfs interface, but the code is here already for long time.

There are 2 ideas to fix showing up in my brain,
1) Do not fix the problem
    Normally it is rare that a storage media has 100+ bad block ranges, maybe in real world all the existing bad blocks information won't exceed the page size limitation of sysfs file.
2) Add seq_file support to sysfs interface if there is no

It is probably there is other better solution to fix. So I do want to get hint/advice from you.

Thanks in advance for any comment :-)

Coly Li

On 9/14/21 12:36 AM, Coly Li wrote:
This is the second effort to improve badblocks code APIs to handle
multiple ranges in bad block table.

There are 2 changes from previous version,
- Fixes 2 bugs in front_overwrite() which are detected by the user
   space testing code.
- Provide the user space testing code in last patch.

There is NO in-memory or on-disk format change in the whole series, all
existing API and data structures are consistent. This series just only
improve the code algorithm to handle more corner cases, the interfaces
are same and consistency to all existing callers (md raid and nvdimm
drivers).

The original motivation of the change is from the requirement from our
customer, that current badblocks routines don't handle multiple ranges.
For example if the bad block setting range covers multiple ranges from
bad block table, only the first two bad block ranges merged and rested
ranges are intact. The expected behavior should be all the covered
ranges to be handled.

All the patches are tested by modified user space code and the code
logic works as expected. The modified user space testing code is
provided in last patch. The testing code detects 2 defects in helper
front_overwrite() and fixed in this version.

The whole change is divided into 6 patches to make the code review more
clear and easier. If people prefer, I'd like to post a single large
patch finally after the code review accomplished.

This version is seriously tested, and so far no more defect observed.


Coly Li

Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: Jens Axboe <axboe@xxxxxxxxx>
Cc: NeilBrown <neilb@xxxxxxx>
Cc: Richard Fan <richard.fan@xxxxxxxx>
Cc: Vishal L Verma <vishal.l.verma@xxxxxxxxx>
---
Changelog:
v3: add tester Richard Fan <richard.fan@xxxxxxxx>
v2: the improved version, and with testing code.
v1: the first completed version.


Coly Li (6):
   badblocks: add more helper structure and routines in badblocks.h
   badblocks: add helper routines for badblock ranges handling
   badblocks: improvement badblocks_set() for multiple ranges handling
   badblocks: improve badblocks_clear() for multiple ranges handling
   badblocks: improve badblocks_check() for multiple ranges handling
   badblocks: switch to the improved badblock handling code
Coly Li (1):
   test: user space code to test badblocks APIs

  block/badblocks.c         | 1599 ++++++++++++++++++++++++++++++-------
  include/linux/badblocks.h |   32 +
  2 files changed, 1340 insertions(+), 291 deletions(-)





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux