On 9/11/21 4:01 PM, Jens Axboe wrote:
> On 9/11/21 3:47 PM, Bart Van Assche wrote:
>> The following test:
>>
>> sudo taskset -c 0 t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B1 /dev/nullb0
>>
>> reports 1366 K IOPS on my test setup without this patch and 1380 K IOPS
>> with this patch applied. In other words, this patch realizes a 1%
>> performance improvement. I think this is because this patch makes the
>> compiler generate better code. See also commit da521626ac62 ("bio:
>> optimize initialization of a bio").
>>
>> The assembler code generated by gcc without this patch is as follows:
>>
>> 0x0000000000000000 <+0>: call 0x5 <bio_init+5>
>> 0x0000000000000005 <+5>: xor %eax,%eax
>> 0x0000000000000007 <+7>: xor %ecx,%ecx
>> 0x0000000000000009 <+9>: movl $0x1,0x1c(%rdi)
>> 0x0000000000000010 <+16>: movq $0x0,(%rdi)
>> 0x0000000000000017 <+23>: movq $0x0,0x8(%rdi)
>> 0x000000000000001f <+31>: movq $0x0,0x10(%rdi)
>> 0x0000000000000027 <+39>: mov %ax,0x18(%rdi)
>> 0x000000000000002b <+43>: movb $0x0,0x1a(%rdi)
>> 0x000000000000002f <+47>: movq $0x0,0x20(%rdi)
>> 0x0000000000000037 <+55>: movq $0x0,0x28(%rdi)
>> 0x000000000000003f <+63>: movl $0x0,0x30(%rdi)
>> 0x0000000000000046 <+70>: movq $0x0,0x38(%rdi)
>> 0x000000000000004e <+78>: movq $0x0,0x40(%rdi)
>> 0x0000000000000056 <+86>: movq $0x0,0x48(%rdi)
>> 0x000000000000005e <+94>: movq $0x0,0x50(%rdi)
>> 0x0000000000000066 <+102>: movq $0x0,0x58(%rdi)
>> 0x000000000000006e <+110>: movq $0x0,0x60(%rdi)
>> 0x0000000000000076 <+118>: mov %cx,0x68(%rdi)
>> 0x000000000000007a <+122>: movl $0x1,0x6c(%rdi)
>> 0x0000000000000081 <+129>: mov %dx,0x6a(%rdi)
>> 0x0000000000000085 <+133>: mov %rsi,0x70(%rdi)
>> 0x0000000000000089 <+137>: movq $0x0,0x78(%rdi)
>> 0x0000000000000091 <+145>: ret
>>
>> With this patch bio_init() is compiled into the following assembly code:
>>
>> 0x0000000000000000 <+0>: call 0x5 <bio_init+5>
>> 0x0000000000000005 <+5>: mov %rdi,%r8
>> 0x0000000000000008 <+8>: mov $0x10,%ecx
>> 0x000000000000000d <+13>: xor %eax,%eax
>> 0x000000000000000f <+15>: rep stos %rax,%es:(%rdi)
>> 0x0000000000000012 <+18>: movl $0x1,0x1c(%r8)
>> 0x000000000000001a <+26>: mov %dx,0x6a(%r8)
>> 0x000000000000001f <+31>: movl $0x1,0x6c(%r8)
>> 0x0000000000000027 <+39>: mov %rsi,0x70(%r8)
>> 0x000000000000002b <+43>: ret
>>
>> Cc: Christoph Hellwig <hch@xxxxxx>
>> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
>> ---
>> block/bio.c | 45 ++++++++-------------------------------------
>> 1 file changed, 8 insertions(+), 37 deletions(-)
>>
>> diff --git a/block/bio.c b/block/bio.c
>> index 5df3dd282e40..775cd4274523 100644
>> --- a/block/bio.c
>> +++ b/block/bio.c
>> @@ -244,47 +244,18 @@ static void bio_free(struct bio *bio)
>> }
>>
>> /*
>> - * Users of this function have their own bio allocation. Subsequently,
>> - * they must remember to pair any call to bio_init() with bio_uninit()
>> - * when IO has completed, or when the bio is released.
>> + * Users of this function must pair any call to bio_init() with a call to
>> + * bio_uninit() after IO has completed or when the bio is released.
>> */
>> void bio_init(struct bio *bio, struct bio_vec *table,
>> unsigned short max_vecs)
>> {
>> - bio->bi_next = NULL;
>> - bio->bi_bdev = NULL;
>> - bio->bi_opf = 0;
>> - bio->bi_flags = 0;
>> - bio->bi_ioprio = 0;
>> - bio->bi_write_hint = 0;
>> - bio->bi_status = 0;
>> - bio->bi_iter.bi_sector = 0;
>> - bio->bi_iter.bi_size = 0;
>> - bio->bi_iter.bi_idx = 0;
>> - bio->bi_iter.bi_bvec_done = 0;
>> - bio->bi_end_io = NULL;
>> - bio->bi_private = NULL;
>> -#ifdef CONFIG_BLK_CGROUP
>> - bio->bi_blkg = NULL;
>> - bio->bi_issue.value = 0;
>> -#ifdef CONFIG_BLK_CGROUP_IOCOST
>> - bio->bi_iocost_cost = 0;
>> -#endif
>> -#endif
>> -#ifdef CONFIG_BLK_INLINE_ENCRYPTION
>> - bio->bi_crypt_context = NULL;
>> -#endif
>> -#ifdef CONFIG_BLK_DEV_INTEGRITY
>> - bio->bi_integrity = NULL;
>> -#endif
>> - bio->bi_vcnt = 0;
>> -
>> - atomic_set(&bio->__bi_remaining, 1);
>> - atomic_set(&bio->__bi_cnt, 1);
>> -
>> - bio->bi_max_vecs = max_vecs;
>> - bio->bi_io_vec = table;
>> - bio->bi_pool = NULL;
>> + *bio = (struct bio) {
>> + .__bi_remaining = ATOMIC_INIT(1),
>> + .__bi_cnt = ATOMIC_INIT(1),
>> + .bi_max_vecs = max_vecs,
>> + .bi_io_vec = table,
>> + };
>> }
>
> I'll give this a whirl too, another upside is that it's less prone to
> errors if struct bio is changed.
Seems slower for me, by about 1-1.5%, which is consumed by
bio_alloc_kiocb() which is the only bio_init() caller in my test. Using
gcc 11.1 here, and my code generation seems to match your case too
(series of mov vs rep stos with the patch).
Probably a CPU thing. I'm running on an AMD 3970X for these tests.
--
Jens Axboe
