On 9/10/2021 1:57 AM, Michael S. Tsirkin wrote:
On Thu, Sep 09, 2021 at 07:45:42PM +0300, Max Gurtovoy wrote:
On 9/9/2021 7:31 PM, Michael S. Tsirkin wrote:
On Thu, Sep 09, 2021 at 06:51:56PM +0300, Max Gurtovoy wrote:
On 9/9/2021 6:40 PM, Michael S. Tsirkin wrote:
On Thu, Sep 09, 2021 at 06:37:37PM +0300, Max Gurtovoy wrote:
On 9/9/2021 4:42 PM, Michael S. Tsirkin wrote:
On Mon, Sep 06, 2021 at 02:59:40PM +0300, Max Gurtovoy wrote:
On 9/6/2021 2:20 PM, Michael S. Tsirkin wrote:
On Mon, Sep 06, 2021 at 01:31:32AM +0300, Max Gurtovoy wrote:
On 9/5/2021 7:02 PM, Michael S. Tsirkin wrote:
On Thu, Sep 02, 2021 at 02:45:52PM +0100, Stefan Hajnoczi wrote:
On Tue, Aug 31, 2021 at 04:50:35PM +0300, Max Gurtovoy wrote:
Sometimes a user would like to control the amount of IO queues to be
created for a block device. For example, for limiting the memory
footprint of virtio-blk devices.
Signed-off-by: Max Gurtovoy <mgurtovoy@xxxxxxxxxx>
---
changes from v1:
- use param_set_uint_minmax (from Christoph)
- added "Should > 0" to module description
Note: This commit apply on top of Jens's branch for-5.15/drivers
---
drivers/block/virtio_blk.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 4b49df2dfd23..9332fc4e9b31 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -24,6 +24,22 @@
/* The maximum number of sg elements that fit into a virtqueue */
#define VIRTIO_BLK_MAX_SG_ELEMS 32768
+static int virtblk_queue_count_set(const char *val,
+ const struct kernel_param *kp)
+{
+ return param_set_uint_minmax(val, kp, 1, nr_cpu_ids);
+}
Hmm which tree is this for?
I've mentioned in the note that it apply on branch for-5.15/drivers. But now
you can apply it on linus/master as well.
+
+static const struct kernel_param_ops queue_count_ops = {
+ .set = virtblk_queue_count_set,
+ .get = param_get_uint,
+};
+
+static unsigned int num_io_queues;
+module_param_cb(num_io_queues, &queue_count_ops, &num_io_queues, 0644);
+MODULE_PARM_DESC(num_io_queues,
+ "Number of IO virt queues to use for blk device. Should > 0");
better:
+MODULE_PARM_DESC(num_io_request_queues,
+ "Limit number of IO request virt queues to use for each device. 0 for now limit");
You proposed it and I replied on it bellow.
Can't say I understand 100% what you are saying. Want to send
a description that does make sense to you but
also reflects reality? 0 is the default so
"should > 0" besides being ungrammatical does not seem t"
reflect what it does ...
if you "modprobe virtio_blk" the previous behavior will happen.
You can't "modprobe virtio_blk num_io_request_queues=0" since the minimal
value is 1.
So your description is not reflecting the code.
We can do:
MODULE_PARM_DESC(num_io_request_queues, "Number of request virt queues to use for blk device. Minimum value is 1 queue");
What's the default value? We should document that.
default value for static global variables is 0.
MODULE_PARM_DESC(num_io_request_queues, "Number of request virt queues to
use for blk device. Minimum value is 1 queue. Default and Maximum value is
equal to the total number of CPUs");
So it says it's the # of cpus but yoiu inspect it with
sysfs and it's actually 0. Let's say that's confusing
at the least. why not just let users set it to 0
and document that?
Setting it by the user to 0 makes no sense.
We can say "if not set, the value equals to the total number of CPUs".
the value is 0. it seems to mean "no limit". the actual # of queues is
then te smaller between # of cpus and # of hardware queues.
I see no reason not to allow user to set that especially if
it was originally the value then user changed it
and is trying to change it back.
I fine with that.
MODULE_PARM_DESC(num_io_request_queues, "Number of request virt queues to use for blk device. 0 value means no limitation");
The actual value of the created queues can be seen in /sys/block/vda/mq/ as
done today.
+
static int major;
static DEFINE_IDA(vd_index_ida);
@@ -501,7 +517,9 @@ static int init_vq(struct virtio_blk *vblk)
if (err)
num_vqs = 1;
- num_vqs = min_t(unsigned int, nr_cpu_ids, num_vqs);
+ num_vqs = min_t(unsigned int,
+ min_not_zero(num_io_queues, nr_cpu_ids),
+ num_vqs);
If you respin, please consider calling them request queues. That's the
terminology from the VIRTIO spec and it's nice to keep it consistent.
But the purpose of num_io_queues is clear, so:
Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
I did this:
+static unsigned int num_io_request_queues;
+module_param_cb(num_io_request_queues, &queue_count_ops, &num_io_request_queues, 0644);
+MODULE_PARM_DESC(num_io_request_queues,
+ "Limit number of IO request virt queues to use for each device. 0 for now limit");
The parameter is writable and can be changed and then new devices might be
probed with new value.
It can't be zero in the code. we can change param_set_uint_minmax args and
say that 0 says nr_cpus.
I'm ok with the renaming but I prefer to stick to the description we gave in
V3 of this patch (and maybe enable value of 0 as mentioned above).
