[PATCH] blktrace: Fix uaf in blk_trace access after removing by sysfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is an use-after-free problem triggered by following process:

      P1(sda)				P2(sdb)
			echo 0 > /sys/block/sdb/trace/enable
			  blk_trace_remove_queue
			    synchronize_rcu
			    blk_trace_free
			      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
			        relay_close_buf
				  relay_destroy_buf
				    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Don't remove blk_trace by sysfs when blk_trace is at Blktrace_running
state, just like function __blk_trace_remove() does. The state change
process and blk_trace_remove_queue() are protected and by mutex lock
'q->debugfs_mutex', so the sequence of stopping blk_trace first and
then removing it will be ensured.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@xxxxxxxxxx>
---
 kernel/trace/blktrace.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index c221e4c3f625..7fe29bb9746f 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1821,8 +1821,17 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
 		}
 		if (value)
 			ret = blk_trace_setup_queue(q, bdev);
-		else
-			ret = blk_trace_remove_queue(q);
+		else {
+			/*
+			 * Don't remove blk_trace under running state, in
+			 * case triggering use-after-free in function
+			 * __blk_add_trace().
+			 */
+			if (bt->trace_state != Blktrace_running)
+				ret = blk_trace_remove_queue(q);
+			else
+				ret = -EBUSY;
+		}
 		goto out_unlock_bdev;
 	}
 
-- 
2.31.1




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux