[LSF/MM/BPF TOPIC] SSDFS: LFS file system without GC operations + NAND flash devices lifetime prolongation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

I would like to discuss SSDFS file system [1] architecture. The architecture of file system has ben designed to be the LFS file system that can: (1) exclude the GC overhead, (2) prolong NAND flash devices lifetime, (3) achieve a good performance balance even if the NAND flash device's lifetime  is a priority. I wrote a paper [5] that contains analysis of possible approaches to prolong NAND flash device's lifetime and deeper explanation of SSDFS file system architecture.

The fundamental concepts of SSDFS:

[LOGICAL SEGMENT] Logical segment is always located at the same position of the volume. And file system volume can be imagined like a sequence of logical segments on the fixed positions. As a result, every logical block can be described by logical extent {segment_id, block_index_inside_segment, length}. It means that metadata information about position of logical block on the volume never needs to be updated because it will always live at the same logical segment even after update (COW policy). This concept completely excludes block mapping metadata structure updates that could result in decreasing the write amplification factor. Because, COW policy requires frequent updates of block mapping metadata structure.

[LOGICAL ERASE BLOCK] Initially, logical segment is an empty container that is capable to contain one or several erase blocks. Logical erase block can be mapped into any “physical” erase block. “Physical” erase block means a contiguous sequence of LBAs are aligned on erase block size. There is mapping table that manages the association of logical erase blocks (LEB) into “physical” erase blocks (PEB). The goal of LEB and mapping table is to implement the logical extent concept. The goal to have several LEBs into one segment is to improve performance of I/O operations. Because, PEBs in the segment can be located into different NAND dies on the device and can be accessed through different device’s channels.

[SEGMENT TYPE] There are several segment types on the volume (superblock, mapping  table, segment bitmap, b-tree node, user data). The goal of various segment types is to make PEB’s “temperature” more predictable and to compact/aggregate several pieces of data into one NAND page. For example, several small files, several compressed logical blocks, or several compressed b-tree nodes can be aggregated into one NAND page. It means that several pieces of data can be aggregated into one write/read (I/O) request and it is the way to decrease the write amplification factor. To make PEB’s “temperature" more predictable implies that aggregation of the same type of data into one segment can make more stable/predictable average number of update/read I/O requests for the same segment type. As a result, it could decrease GC activity and to decrease the write amplification factor.

[LOG] Log is the central part of techniques to manage the write amplification factor. Every PEB contains one log or sequence of logs. The goal of log is to aggregate several pieces of data into one NAND page to decrease the write amplification factor. For example, several small files or several compressed logical blocks can be aggregated into one NAND page. An offset transaction table is the metadata structure that converts the logical block ID (LBA) into the offset inside of the log where a piece of data is stored. Log is split on several areas (diff-on-write area, journal area, main area) with the goal to store the data of different nature. For example, main area could store not compressed logical block, journal area could aggregate small files or compressed logical blocks into one NAND page, and diff-on-wrtite area could aggregate small updates of different logical blocks into one NAND page. The different area types have goal to distinguish “temperature” of data and to average the “temperature” of area. For example, diff-on-write area could be more hot than journal area. As a result, it is possible to expect that, for example, diff-on-write area could be completely invalidated by regular updates of some logical blocks without necessity to use any GC activity.

[MIGRATION SCHEME] Migration scheme is the central technique to implement the logical extent concept and to exclude the necessity in GC activity. If some PEB is exhausted by logs (no free space) then it needs to start the migration for this PEB. Because it is used compression and compaction schemes for the metadata and user data then real data volume is using only portion of the PEB’s space. It means that it is possible to reserve another PEB in mapping table with the goal to associate two PEBs for migration process (exhausted PEB is the source and clean PEB is the destination). Every update of some logical block results in storing new state in the destination PEB and invalidation of logical block in the exhausted one. Generally speaking, it means that regular I/O operations are capable to completely invalidate the exhausted PEB for the case of “hot" data. Finally, invalidated PEB can be erased and to marked as clean and available for new write operations. Another important point that even after migration the logical block is still living in the same segment. And it doesn’t need to update metadata in block mapping metadata structure because logical extent has actual state. The offset translation table are keeping the actual position of logical block in the PEB space.

[MIGRATION STIMULATION] However, not every PEB can migrate completely under pressure of regular I/O operations (for example, in the case of “warm” or “cold” data). So, SSDFS is using the migration stimulation technique as complementary to migration scheme. It means that if some LEB is under migration then a flush thread is checking the opportunity to add some additional content into the log under commit. If flush thread has received a request to commit some log then it has the content of updated logical blocks that have been requested to be updated. However, it is possible that available content cannot fill a whole NAND page completely (for example, it can use only 2 KB). And if there are some valid logical blocks in the exhausted PEB then it is possible to compress and to add the content of such logical block into the log under commit. Finally, every log commit can be resulted by migration additional logical blocks from exhausted PEB into new one. As a result, regular update (I/O) operations can completely invalidate the exhausted PEB without the necessity in GC activity at all. The important point here that compaction technique can decrease the amount of write requests. And exclusion of GC activity results in decreasing of I/O operations are initiated by GC. It is possible to state that migration scheme and migration stimulation techniques are capable to significantly decrease the write amplification factor.

[GC] SSDFS has several GC threads but the goal of these threads is to check the state of segments, to stimulate the slow migration process, and to destroy already not in use the in-core segment objects. There is segment bitmap metadata structure that is tracking the state of segments (clean, using, used, pre-dirty, dirty). Every GC thread is dedicated to check the segments in similar state (for example, pre-dirty). Sometimes, PEB migration process could start and then to be stuck for some time because of absence of update requests for this particular PEB under migration. The goal of GC threads is to find such PEBs and to stimulate migration of valid blocks from exhausted PEB to clean one. But the number of GC initiated I/O requests could be pretty negligible because GC selects the segments that have no consumers right now. Migration scheme and migration stimulation could manage around 90% of the all necessary migration and cleaning operations.

[COLD DATA] SSDFS never moves the PEBs with cold data. It means that if some PEB with data is not under migration and doesn’t receive the update requests then SSDFS leaves such PEBs untouched. Because, FTL could manage error-correction and moving erase blocks with cold data in the background inside of NAND flash device. Such technique could be considered like another approach to decrease the write amplification factor.

[B-TREE] Migration scheme and logical extent concept provide the way to use the b-trees. The inodes tree, dentries trees, and extents trees are implemented as b-trees. And this is important technique to decrease the write amplification factor. First of all, b-tree provides the way to exclude the metadata reservation because it is possible to add the metadata space on b-tree’s node basis. Additionally, SSDFS is using three type of nodes: (1) leaf node, (2) hybrid node, (3) index node. The hybrid node includes as metadata records as index records that are the metadata about another nodes in the tree. So, the hybrid node is the way to decrease the number of nodes for the case of small b-trees. As a result, it can decrease the write amplification factor and decrease the NAND flash wearing that could result in prolongation of NAND flash device lifetime. 

[PURE LFS] SSDFS is pure LFS file system without any in-place update areas. It follows COW policy in any areas of the volume. Even superblocks are stored into dedicated segment as a sequence. Moreover, every header of the log contains copy of superblock that can be considered like a reliability technique. It is possible to use two different techniques of placing superblock segments on the volume. These segments could live in designated set of segments or could be distributed through the space of the volume. However, the designated set of segments could guarantee the predictable mount time and to decrease the read disturbance.

[INLINE TECHNIQUES] SSDFS is trying to use inline techniques as much as possible. For example, small inodes tree can be kept in the superblock at first. Small dentries and extents tree can be kept in the inode as inline metadata. Small file’s content can be stored into inode as inline data. It means that it doesn’t need to allocate dedicated logical block for small metadata or user data. So, such inline techniques are able to combine several metadata (and user data) pieces into one I/O request and to decrease write amplification factor.

[MINIMUM RESERVATIONS] There are two metadata structures (mapping table and segment bitmap) that require reservation on the volume. These metadata structures’ size is defined by volume size and erase block, segment sizes. So, as a result, these metadata structures describe the current state of the volume. But the rest metadata (inodes tree, dentries trees, xattr trees, and so on) are represented by b-trees and it doesn’t need to be reserved beforehand. So, it can be allocated by nodes in the case when old ones are exhausted. Finally, NAND flash device doesn’t need to keep the reserved metadata space that, currently, contains nothing. As a result, FTL doesn’t need to manage this NAND pages and it could decrease NAND flash wearing. So, it could be considered like technique to prolong NAND flash device’s lifetime.

[MULTI-THREADED ARCHITECTURE] SSDFS is based on multi-threaded approach. It means that there are dedicated threads for some tasks. For example, there is special thread that is sending TRIM or erase operation requests for invalidated PEBs in the background. Another dedicated thread is doing the extents trees invalidation in the background. Also, there are several GC threads (in the background) that are tracking the necessity to stimulate migration in segments and to destroy the in-core segment objects in the case of absence of consumers of these segments. But this technique is directed to manage the performance mostly. 

Thanks,
Slava.

[1] www.ssdfs.org
[2] SSDFS tools: https://github.com/dubeyko/ssdfs-tools.git
[3] SSDFS driver: https://github.com/dubeyko/ssdfs-driver.git
[4] SSDFS Linux kernel: https://github.com/dubeyko/linux.git
[5] https://arxiv.org/abs/1907.11825





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux