Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> In the course of review, some concerns were surfaced about the
> original virtio-blk lifetime proposal, as it depends on the eMMC
> spec which is not open
> 
> Add a more detailed description of the meaning of the fields
> added by that proposal to the virtio-blk specification, as to
> make it feasible to understand and implement the new lifetime
> metrics feature without needing to refer to JEDEC's specification
> 
> This patch does not change the meaning of those fields nor add
> any new fields, but it is intended to provide an open and more
> clear description of the meaning associated with those fields.
> 
> Signed-off-by: Enrico Granata <egranata@xxxxxxxxxx>

Enrico it's great that you are reaching out to the
wider storage community before making spec changes.

Christoph could you please comment on whether this addresses
your concerns with the lifetime feature.
You wrote "it really needs to stand a lone and be properly documented"
and this seems to be the direction this patch is going in.


> ---
>  content.tex | 34 +++++++++++++++++++++++++++-------
>  1 file changed, 27 insertions(+), 7 deletions(-)
> 
> diff --git a/content.tex b/content.tex
> index 9232d5c..7e14ccc 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -4669,13 +4669,32 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
>  \end{lstlisting}
>  
>  The device lifetime metrics \field{pre_eol_info}, \field{device_lifetime_est_a}
> -and \field{device_lifetime_est_b} have the semantics described by the JESD84-B50
> -specification for the extended CSD register fields \field{PRE_EOL_INFO}
> -\field{DEVICE_LIFETIME_EST_TYP_A} and \field{DEVICE_LIFETIME_EST_TYP_B}
> -respectively.
> +and \field{device_lifetime_est_b} are discussed in the JESD84-B50 specification.
>  
> -JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> -pursuant to JEDEC's licensing terms and conditions.
> +The complete JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> +pursuant to JEDEC's licensing terms and conditions.

These links really belong in either normative or non-normative
references section.

> For the purposes of this
> +specification, these fields are defined as follows.

All this seems kind of vague. What does one need that spec for?
Is it just a note for pass-through developers?

How about "to simplify pass-through
from eMMC devices the format of fields 
  pre_eol_info, device_lifetime_est_typ_a and device_lifetime_est_typ_b
matches PRE_EOL_INFO, DEVICE_LIFETIME_EST_TYP_A and DEVICE_LIFETIME_EST_TYP_B
in the 
\hyperref[intro:PCI]{[PCI]}.



Also, now that I mention it, what about NVMe pass-through? Arguably
nvme is getting more popular. Will we be able to support that use-case
as well? Or is more data needed? What is the plan there?

> +
> +The \field{pre_eol_info} will have one of these values:
> +
> +\begin{lstlisting}
> +// Value not available
> +#define PRE_EOL_INFO_UNDEFINED    0
> +// < 80% of blocks are consumed
> +#define PRE_EOL_INFO_NORMAL       1
> +// 80% of blocks are consumed
> +#define PRE_EOL_INFO_WARNING      2
> +// 90% of blocks are consumed
> +#define PRE_EOL_INFO_URGENT       3
> +// All others values are reserved


Block comments /* */ should be used as these are documented
in the introduction.

> +\end{lstlisting}
> +
> +The \field{device_lifetime_est_typ_a} refers to wear of SLC cells and is provided in
> +increments of 10%, with 0 meaning undefined, 1 meaning up-to 10% of lifetime used, and so on,
> +thru to 11 meaning estimated lifetime exceeded. All values above 11 are reserved.
> +
> +The \field{device_lifetime_est_typ_b} refers to wear of MLC cells and is provided with
> +the same semantics as \field{device_lifetime_est_typ_a}.
>  
>  The final \field{status} byte is written by the device: either
>  VIRTIO_BLK_S_OK for success, VIRTIO_BLK_S_IOERR for device or driver
> @@ -4812,7 +4831,8 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
>  or UFS persistent storage), the device SHOULD offer the VIRTIO_BLK_F_LIFETIME
>  flag. The flag MUST NOT be offered if the device is backed by storage for which
>  the lifetime metrics described in this document cannot be obtained or for which
> -such metrics have no useful meaning.
> +such metrics have no useful meaning. If the metrics are offered, the device MUST NOT
> +send any reserved values, as defined in this specification.
>  
>  \subsubsection{Legacy Interface: Device Operation}\label{sec:Device Types / Block Device / Device Operation / Legacy Interface: Device Operation}
>  When using the legacy interface, transitional devices and drivers
> -- 
> 2.31.1.368.gbe11c130af-goog
> 




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux