In SD spec v4.x the SD function extension registers were introduced. A
specific function register were added to let the card announce support for
optional features in regards to power management. The features that were
added are "Power Off Notification", "Power Down Mode" and "Power
Sustenance".
As a first step, let's read and parse this register for power management
during the SD card initialization and store the information about the
supported features in the struct mmc_card. In this way, it becomes easier
for subsequent changes to implement the complete support.
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/core/sd.c | 172 +++++++++++++++++++++++++++++++++++++++
include/linux/mmc/card.h | 12 +++
include/linux/mmc/sd.h | 3 +
3 files changed, 187 insertions(+)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index de7b5f8df550..d6e838b7c895 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -996,6 +996,171 @@ static bool mmc_sd_card_using_v18(struct mmc_card *card)
(SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR104 | SD_MODE_UHS_DDR50);
}
+static int sd_read_ext_reg_fno(struct mmc_card *card, u8 fno, u32 reg_addr,
+ u8 **buf)
+{
+ int err;
+ u8 *tmp_buf;
+ u32 cmd_args;
+
+ /*
+ * Arguments of CMD48 to read a page of 512 bytes:
+ * [31:31] MIO (0 = memory).
+ * [30:27] FNO (function number).
+ * [26:26] reserved (0).
+ * [25:18] page number.
+ * [17:9] offset address.
+ * [8:0] length (1FF = 512 bytes data).
+ */
+ cmd_args = 0x000001ff | fno << 27 | reg_addr << 9;
+
+ tmp_buf = kzalloc(512, GFP_KERNEL);
+ if (!tmp_buf)
+ return -ENOMEM;
+
+ err = mmc_send_adtc_data(card, card->host, SD_READ_EXTR_SINGLE,
+ cmd_args, tmp_buf, 512);
+ if (err)
+ kfree(tmp_buf);
+ else
+ *buf = tmp_buf;
+
+ return err;
+}
+
+static int sd_decode_ext_reg_power(struct mmc_card *card, u8 fno, u32 reg_addr)
+{
+ int err;
+ u8 *reg_buf;
+
+ /* Read the extension register for power management function. */
+ err = sd_read_ext_reg_fno(card, fno, reg_addr, ®_buf);
+ if (err) {
+ pr_warn("%s: error %d reading PM func of ext reg\n",
+ mmc_hostname(card->host), err);
+ return err;
+ }
+
+ /* PM revision consists of 4 bits. */
+ card->ext_power.rev = reg_buf[0] & 0xf;
+
+ /* Power Off Notification support at bit 4. */
+ if (reg_buf[1] & 0x10)
+ card->ext_power.feature_support |= SD_EXT_POWER_OFF_NOTIFY;
+
+ /* Power Sustenance support at bit 5. */
+ if (reg_buf[1] & 0x20)
+ card->ext_power.feature_support |= SD_EXT_POWER_SUSTENANCE;
+
+ /* Power Down Mode support at bit 6. */
+ if (reg_buf[1] & 0x40)
+ card->ext_power.feature_support |= SD_EXT_POWER_DOWN_MODE;
+
+ card->ext_power.reg_addr = reg_addr;
+ card->ext_power.fno = fno;
+
+ kfree(reg_buf);
+ return 0;
+}
+
+static int sd_decode_ext_reg(struct mmc_card *card, u8 *gen_info_buf,
+ u16 *next_ext_addr)
+{
+ u8 num_reg_sets, fno;
+ u16 ext = *next_ext_addr, sfc;
+ u32 reg_set_addr, reg_addr;
+
+ /*
+ * Parse only one register set per extension, as that is sufficient to
+ * support the Standard Functions. This means another 48 bytes in the
+ * buffer must be available.
+ */
+ if (ext + 48 > 512)
+ return -EFAULT;
+
+ /* Standard Function Code */
+ memcpy(&sfc, &gen_info_buf[ext], 2);
+
+ /* Address to the next extension. */
+ memcpy(next_ext_addr, &gen_info_buf[ext + 40], 2);
+
+ /* Number of registers sets for this extension. */
+ num_reg_sets = gen_info_buf[ext + 42];
+
+ if (num_reg_sets != 1)
+ return 0;
+
+ /* Extension register address. */
+ memcpy(®_set_addr, &gen_info_buf[ext + 44], 4);
+
+ /* First 17 bits contains the page and the offset. */
+ reg_addr = reg_set_addr & 0x1FFFF;
+
+ /* 4 bits (18 to 21) contains the Function Number. */
+ fno = reg_set_addr >> 18 & 0xf;
+
+ /* Standard Function Code for power management. */
+ if (sfc == 0x1)
+ return sd_decode_ext_reg_power(card, fno, reg_addr);
+
+ return 0;
+}
+
+static int sd_read_ext_regs(struct mmc_card *card)
+{
+ int err, i;
+ u8 num_ext, *gen_info_buf;
+ u16 rev, len, next_ext_addr;
+
+ if (mmc_host_is_spi(card->host))
+ return 0;
+
+ if (!(card->scr.cmds & SD_SCR_CMD48_SUPPORT))
+ return 0;
+
+ /* Read general info at page 0, with no offset and FNO=0. */
+ err = sd_read_ext_reg_fno(card, 0, 0, &gen_info_buf);
+ if (err) {
+ pr_warn("%s: error %d reading general info of SD ext reg\n",
+ mmc_hostname(card->host), err);
+ return err;
+ }
+
+ /* General info structure revision. */
+ memcpy(&rev, &gen_info_buf[0], 2);
+
+ /* Length of general info in bytes. */
+ memcpy(&len, &gen_info_buf[2], 2);
+
+ /* Number of extensions to be find. */
+ num_ext = gen_info_buf[4];
+
+ /* We support revision 0, but limit it to 512 bytes - for simplicity. */
+ if (rev != 0 || len > 512) {
+ pr_warn("%s: non-supported SD ext reg layout\n",
+ mmc_hostname(card->host));
+ goto out;
+ }
+
+ /*
+ * Read/parse the extension registers. The first extension should start
+ * immediately after the general info header (16 bytes).
+ */
+ next_ext_addr = 16;
+ for (i = 0; i < num_ext; i++) {
+ err = sd_decode_ext_reg(card, gen_info_buf, &next_ext_addr);
+ if (err) {
+ pr_warn("%s: error %d parsing SD ext reg\n",
+ mmc_hostname(card->host), err);
+ goto out;
+ }
+ }
+
+out:
+ kfree(gen_info_buf);
+ return err;
+}
+
/*
* Handle the detection and initialisation of a card.
*
@@ -1144,6 +1309,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
}
}
+ if (!oldcard) {
+ /* Read/parse the extension registers. */
+ err = sd_read_ext_regs(card);
+ if (err)
+ goto free_card;
+ }
+
if (host->cqe_ops && !host->cqe_enabled) {
err = host->cqe_ops->cqe_enable(host, card);
if (!err) {
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 858fc4d11240..6a1d64fba0f3 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -191,6 +191,17 @@ struct sd_switch_caps {
#define SD_MAX_CURRENT_800 (1 << SD_SET_CURRENT_LIMIT_800)
};
+struct sd_ext_reg {
+ u32 reg_addr;
+ u8 fno;
+ u8 rev;
+ u8 feature_support;
+/* Power Management Function. */
+#define SD_EXT_POWER_OFF_NOTIFY (1<<0)
+#define SD_EXT_POWER_SUSTENANCE (1<<1)
+#define SD_EXT_POWER_DOWN_MODE (1<<2)
+};
+
struct sdio_cccr {
unsigned int sdio_vsn;
unsigned int sd_vsn;
@@ -292,6 +303,7 @@ struct mmc_card {
struct sd_scr scr; /* extra SD information */
struct sd_ssr ssr; /* yet more SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
+ struct sd_ext_reg ext_power; /* SD extension reg for PM */
unsigned int sdio_funcs; /* number of SDIO functions */
atomic_t sdio_funcs_probed; /* number of probed SDIO funcs */
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index 2236aa540faa..43bfc5c39ad4 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -29,6 +29,9 @@
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */
+ /* class 11 */
+#define SD_READ_EXTR_SINGLE 48 /* adtc [31:0] R1 */
+
/* OCR bit definitions */
#define SD_OCR_S18R (1 << 24) /* 1.8V switching request */
#define SD_ROCR_S18A SD_OCR_S18R /* 1.8V switching accepted by card */
--
2.25.1
