Re: [PATCH RFC] virtio-blk: support per-device queue depth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2021/1/19 上午9:33, JeffleXu wrote:

On 1/18/21 1:25 PM, Jason Wang wrote:
On 2021/1/18 上午11:58, Joseph Qi wrote:
module parameter 'virtblk_queue_depth' was firstly introduced for
testing/benchmarking purposes described in commit fc4324b4597c
("virtio-blk: base queue-depth on virtqueue ringsize or module param").
Since we have different virtio-blk devices which have different
capabilities, it requires that we support per-device queue depth instead
of per-module. So defaultly use vq free elements if module parameter
'virtblk_queue_depth' is not set.

I wonder if it's better to use sysfs instead (or whether it has already
had something like this in the blocker layer).

"/sys/block/<dev>/queue/nr_requests" indeed works, but isn't better to
set queue_depth according to the hardware capability at the very first?
AFAIK, nvme just set per-device queue_depth at initializing phase.


I agree, the problem is that the current code may modify module parameter.

Thanks



Thanks,
Jeffle


Signed-off-by: Joseph Qi <joseph.qi@xxxxxxxxxxxxxxxxx>
---
   drivers/block/virtio_blk.c | 12 +++++++-----
   1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 145606d..f83a417 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -705,6 +705,7 @@ static int virtblk_probe(struct virtio_device *vdev)
       u32 v, blk_size, max_size, sg_elems, opt_io_size;
       u16 min_io_size;
       u8 physical_block_exp, alignment_offset;
+    unsigned int queue_depth;
         if (!vdev->config->get) {
           dev_err(&vdev->dev, "%s failure: config access disabled\n",
@@ -755,17 +756,18 @@ static int virtblk_probe(struct virtio_device
*vdev)
           goto out_free_vq;
       }
   -    /* Default queue sizing is to fill the ring. */
-    if (!virtblk_queue_depth) {
-        virtblk_queue_depth = vblk->vqs[0].vq->num_free;
+    if (likely(!virtblk_queue_depth)) {
+        queue_depth = vblk->vqs[0].vq->num_free;
           /* ... but without indirect descs, we use 2 descs per req */
           if (!virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC))
-            virtblk_queue_depth /= 2;
+            queue_depth /= 2;
+    } else {
+        queue_depth = virtblk_queue_depth;
       }
         memset(&vblk->tag_set, 0, sizeof(vblk->tag_set));
       vblk->tag_set.ops = &virtio_mq_ops;
-    vblk->tag_set.queue_depth = virtblk_queue_depth;
+    vblk->tag_set.queue_depth = queue_depth;
       vblk->tag_set.numa_node = NUMA_NO_NODE;
       vblk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
       vblk->tag_set.cmd_size =




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux