On 12/11/20 08:45, Puranjay Mohan wrote:
> PCI core calls __pcie_print_link_status() for every device, it prints
> both the link width and the link speed. skd_pci_info() does the same
> thing again, hence it can be removed.
>
> Signed-off-by: Puranjay Mohan <puranjay12@xxxxxxxxx>
> ---
> drivers/block/skd_main.c | 31 -------------------------------
> 1 file changed, 31 deletions(-)
>
> diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
> index a962b4551bed..da7aac5335d9 100644
> --- a/drivers/block/skd_main.c
> +++ b/drivers/block/skd_main.c
> @@ -3134,40 +3134,11 @@ static const struct pci_device_id skd_pci_tbl[] = {
>
> MODULE_DEVICE_TABLE(pci, skd_pci_tbl);
>
> -static char *skd_pci_info(struct skd_device *skdev, char *str)
> -{
> - int pcie_reg;
> -
> - strcpy(str, "PCIe (");
> - pcie_reg = pci_find_capability(skdev->pdev, PCI_CAP_ID_EXP);
> -
> - if (pcie_reg) {
> -
> - char lwstr[6];
> - uint16_t pcie_lstat, lspeed, lwidth;
> -
> - pcie_reg += 0x12;
> - pci_read_config_word(skdev->pdev, pcie_reg, &pcie_lstat);
> - lspeed = pcie_lstat & (0xF);
> - lwidth = (pcie_lstat & 0x3F0) >> 4;
> -
> - if (lspeed == 1)
> - strcat(str, "2.5GT/s ");
> - else if (lspeed == 2)
> - strcat(str, "5.0GT/s ");
> - else
> - strcat(str, "<unknown> ");
The skd driver prints unknown if the speed is not "2.5GT/s" or "5.0GT/s".
__pcie_print_link_status() prints "unknown" only if speed
value >= ARRAY_SIZE(speed_strings).
If a buggy skd card returns value that is not != ("2.5GT/s" or "5.0GT/s")
&& value < ARRAY_SIZE(speed_strings) then it will not print the unknown but
the value from speed string array.
Which breaks the current behavior. Please correct me if I'm wrong.
> - snprintf(lwstr, sizeof(lwstr), "%dX)", lwidth);
> - strcat(str, lwstr);
> - }
> - return str;
> -}
>
> static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> {
> int i;
> int rc = 0;
> - char pci_str[32];
> struct skd_device *skdev;
>
> dev_dbg(&pdev->dev, "vendor=%04X device=%04x\n", pdev->vendor,
> @@ -3201,8 +3172,6 @@ static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> goto err_out_regions;
> }
>
> - skd_pci_info(skdev, pci_str);
> - dev_info(&pdev->dev, "%s 64bit\n", pci_str);
>
> pci_set_master(pdev);
> rc = pci_enable_pcie_error_reporting(pdev);
