Hi, NVMeOF Host is capable of handling the NVMe Protocol based Zoned Block Devices (ZBD) in the Zoned Namespaces (ZNS) mode with the passthru backend. There is no support for a generic block device backend to handle the ZBD devices which are not NVMe protocol compliant. This adds support to export the ZBDs (which are not NVMe drives) to host the from target via NVMeOF using the host side ZNS interface. The patch series is generated in bottom-top manner where, it first adds prep patch and ZNS command-specific handlers on the top of genblk and updates the data structures, then one by one it wires up the admin cmds in the order host calls them in namespace initializing sequence. Once everything is ready, it wires-up the I/O command handlers. See below for patch-series overview. All the testcases are passing for the ZoneFS where ZBD exported with NVMeOF backed by null_blk ZBD and null_blk ZBD without NVMeOF. Adding test result below. Note: This patch-series is based on the earlier posted patch series :- [PATCH 0/4] nvmet: admin-cmd related cleanups and a fix http://lists.infradead.org/pipermail/linux-nvme/2020-December/021501.html Regards, Chaitanya Changes from V4:- 1. Don't use bio_iov_iter_get_pages() instead add a patch to export bio_add_hw_page() and call it directly for zone append. 2. Add inline vector optimization for append bio. 3. Update the commit logs for the patches. 4. Remove ZNS related identify data structures, use individual members. 5. Add a comment for macro NVMET_MPSMIN_SHIFT. 6. Remove nvmet_bdev() helper. 7. Move the command set identifier code into common code. 8. Use IS_ENABLED() and move helpers fomr zns.c into common code. 9. Add a patch to support Command Set identifiers. 10. Open code nvmet_bdev_validate_zns_zones(). 11. Remove the per namespace min zasl calculation and don't allow namespaces with zasl value > the first ns zasl value. 12. Move the stubs into the header file. 13. Add lba to/from sector conversion helpers and update the io-cmd-bdev.c to avoid the code duplication. 14. Add everything into one patch for zns command handlers and respective calls from the target code. 15. Remove the trim ns-desclist admin callback patch from this series. 16. Add bio get and put helpers patches to reduce the duplicate code in generic bdev, passthru, and generic zns backend. Changes from V3:- 1. Get rid of the bio_max_zasl check. 2. Remove extra lines. 4. Remove the block layer api export patch. 5. Remove the bvec check in the bio_iov_iter_get_pages() for REQ_OP_ZONE_APPEND so that we can reuse the code. Changes from V2:- 1. Move conventional zone bitmap check into nvmet_bdev_validate_zns_zones(). 2. Don't use report zones call to check the runt zone. 3. Trim nvmet_zasl() helper. 4. Fix typo in the nvmet_zns_update_zasl(). 5. Remove the comment and fix the mdts calculation in nvmet_execute_identify_cns_cs_ctrl(). 6. Use u64 for bufsize in nvmet_bdev_execute_zone_mgmt_recv(). 7. Remove nvmet_zones_to_desc_size() and fix the nr_zones calculation. 8. Remove the op variable in nvmet_bdev_execute_zone_append(). 9. Fix the nr_zones calculation nvmet_bdev_execute_zone_mgmt_recv(). 10. Update cover letter subject. Changes from V1:- 1. Remove the nvmet-$(CONFIG_BLK_DEV_ZONED) += zns.o. 2. Mark helpers inline. 3. Fix typos in the comments and update the comments. 4. Get rid of the curly brackets. 5. Don't allow drives with last smaller zones. 6. Calculate the zasl as a function of ax_zone_append_sectors, bio_max_pages so we don't have to split the bio. 7. Add global subsys->zasl and update the zasl when new namespace is enabled. 8. Rmove the loop in the nvmet_bdev_execute_zone_mgmt_recv() and move functionality in to the report zone callback. 9. Add goto for default case in nvmet_bdev_execute_zone_mgmt_send(). 10. Allocate the zones buffer with zones size instead of bdev nr_zones. Chaitanya Kulkarni (6): block: export bio_add_hw_pages() nvmet: add lba to sect coversion helpers nvmet: add NVM command set identifier support nvmet: add ZBD over ZNS backend support nvmet: add bio put helper for different backends nvmet: add bio get helper for different backends block/bio.c | 1 + block/blk.h | 4 - drivers/nvme/target/Makefile | 1 + drivers/nvme/target/admin-cmd.c | 59 ++++-- drivers/nvme/target/core.c | 14 +- drivers/nvme/target/io-cmd-bdev.c | 51 +++-- drivers/nvme/target/nvmet.h | 71 +++++++ drivers/nvme/target/passthru.c | 11 +- drivers/nvme/target/zns.c | 320 ++++++++++++++++++++++++++++++ include/linux/blkdev.h | 4 + 10 files changed, 488 insertions(+), 48 deletions(-) create mode 100644 drivers/nvme/target/zns.c Test Results :- # ./zonefs-tests.sh /dev/nvme1n1 Gathering information on /dev/nvme1n1... zonefs-tests on /dev/nvme1n1: 4 zones (0 conventional zones, 4 sequential zones) 524288 512B sectors zone size (256 MiB) 1 max open zones Running tests Test 0010: mkzonefs (options) ... PASS Test 0011: mkzonefs (force format) ... PASS Test 0012: mkzonefs (invalid device) ... PASS Test 0013: mkzonefs (super block zone state) ... PASS Test 0020: mount (default) ... PASS Test 0021: mount (invalid device) ... PASS Test 0022: mount (check mount directory sub-directories) ... PASS Test 0023: mount (options) ... PASS Test 0030: Number of files (default) ... PASS Test 0031: Number of files (aggr_cnv) ... skip Test 0032: Number of files using stat (default) ... PASS Test 0033: Number of files using stat (aggr_cnv) ... PASS Test 0034: Number of blocks using stat (default) ... PASS Test 0035: Number of blocks using stat (aggr_cnv) ... PASS Test 0040: Files permissions (default) ... PASS Test 0041: Files permissions (aggr_cnv) ... skip Test 0042: Files permissions (set value) ... PASS Test 0043: Files permissions (set value + aggr_cnv) ... skip Test 0050: Files owner (default) ... PASS Test 0051: Files owner (aggr_cnv) ... skip Test 0052: Files owner (set value) ... PASS Test 0053: Files owner (set value + aggr_cnv) ... skip Test 0060: Files size (default) ... PASS Test 0061: Files size (aggr_cnv) ... skip Test 0070: Conventional file truncate ... skip Test 0071: Conventional file truncate (aggr_cnv) ... skip Test 0072: Conventional file unlink ... skip Test 0073: Conventional file unlink (aggr_cnv) ... skip Test 0074: Conventional file random write ... skip Test 0075: Conventional file random write (direct) ... skip Test 0076: Conventional file random write (aggr_cnv) ... skip Test 0077: Conventional file random write (aggr_cnv, direct) ... skip Test 0078: Conventional file mmap read/write ... skip Test 0079: Conventional file mmap read/write (aggr_cnv) ... skip Test 0080: Sequential file truncate ... PASS Test 0081: Sequential file unlink ... PASS Test 0082: Sequential file buffered write IO ... PASS Test 0083: Sequential file overwrite ... PASS Test 0084: Sequential file unaligned write (sync IO) ... PASS Test 0085: Sequential file unaligned write (async IO) ... PASS Test 0086: Sequential file append (sync) ... PASS Test 0087: Sequential file append (async) ... PASS Test 0088: Sequential file random read ... PASS Test 0089: Sequential file mmap read/write ... PASS Test 0090: sequential file 4K synchronous write ... PASS Test 0091: Sequential file large synchronous write ... PASS 46 / 46 tests passed -- 2.22.1
