On 11/30/20 12:19 PM, Rachit Agarwal wrote:
> From: Rachit Agarwal <ragarwal@xxxxxxxxxxx>
>
Hi, {reusing bits}
> ---
> Documentation/block/i10-iosched.rst | 79 ++++++
> block/Kconfig.iosched | 8 +
> block/Makefile | 1 +
> block/i10-iosched.c | 471 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 559 insertions(+)
> create mode 100644 Documentation/block/i10-iosched.rst
> create mode 100644 block/i10-iosched.c
> diff --git a/Documentation/block/i10-iosched.rst b/Documentation/block/i10-iosched.rst
> new file mode 100644
> index 0000000..661b5d5
> --- /dev/null
> +++ b/Documentation/block/i10-iosched.rst
> @@ -0,0 +1,79 @@
> +==========================
> +i10 I/O scheduler overview
> +==========================
> +
> +I/O batching is beneficial for optimizing IOPS and throughput for various
> +applications. For instance, several kernel block drivers would benefit from
> +batching, including mmc [1] and tcp-based storage drivers like nvme-tcp [2,3].
MMC TCP-based
> +While we have support for batching dispatch [4], we need an I/O scheduler to
> +efficiently enable batching. Such a scheduler is particularly interesting for
> +disaggregated (remote) storage, where the access latency of disaggregated remote
> +storage may be higher than local storage access; thus, batching can significantly
> +help in amortizing the remote access latency while increasing the throughput.
> +
> +This patch introduces the i10 I/O scheduler, which performs batching per hctx in
> +terms of #requests, #bytes, and timeouts (at microseconds granularity). i10 starts
> +dispatching only when #requests or #bytes is larger than a threshold or when a timer
> +expires. After that, batching dispatch [3] would happen, allowing batching at device
> +drivers along with "bd->last" and ".commit_rqs".
> +
> +The i10 I/O scheduler builds upon recent work on [6]. We have tested the i10 I/O
> +scheduler with nvme-tcp optimizaitons [2,3] and batching dispatch [4], varying number
optimizations
> +of cores, varying read/write ratios, and varying request sizes, and with NVMe SSD and
> +RAM block device. For remote NVMe SSDs, the i10 I/O scheduler achieves ~60% improvements
> +in terms of IOPS per core over "noop" I/O scheduler, while trading off latency at lower loads.
> +These results are available at [5], and many additional results are presented in [6].
> +
> +While other schedulers may also batch I/O (e.g., mq-deadline), the optimization target
> +in the i10 I/O scheduler is throughput maximization. Hence there is no latency target
> +nor a need for a global tracking context, so a new scheduler is needed rather than
> +to build this functionality to an existing scheduler.
> +
> +We have default values for batching thresholds (e.g., 16 for #requests, 64KB for #bytes,
> +and 50us for timeout). These default values are based on sensitivity tests in [6].
> +For many workloads, especially those with low loads, the default values of i10 scheduler
> +may not provide the optimal operating point on the latency-throughput curve. To that end,
> +the scheduler adaptively sets the batch size depending on number of outstanding requests
> +and the triggering of timeouts, as measured in the block layer. Much work needs to be done
> +to design better adaptation algorithms, especially when the loads are neither too high
> +nor too low. This constitutes interesting future work. In addition, for our future work, we
> +plan to extend the scheduler to support isolation in multi-tenant deployments
> +(to simultaneously achieve low tail latency for latency-sensitive applications and high
> +throughput for throughput-bound applications).
> +
> +References
> +[1] https://lore.kernel.org/linux-block/cover.1587888520.git.baolin.wang7@xxxxxxxxx/T/#mc48a8fb6069843827458f5fea722e1179d32af2a
> +[2] https://git.infradead.org/nvme.git/commit/122e5b9f3d370ae11e1502d14ff5c7ea9b144a76
> +[3] https://git.infradead.org/nvme.git/commit/86f0348ace1510d7ac25124b096fb88a6ab45270
> +[4] https://lore.kernel.org/linux-block/20200630102501.2238972-1-ming.lei@xxxxxxxxxx/
> +[5] https://github.com/i10-kernel/upstream-linux/blob/master/i10-evaluation.pdf
> +[6] https://www.usenix.org/conference/nsdi20/presentation/hwang
> +
> +==========================
> +i10 I/O scheduler tunables
> +==========================
[snip]
thanks.
--
~Randy
