Hi,
NVMeOF Host is capable of handling the NVMe Protocol based Zoned Block
Devices (ZBD) in the Zoned Namespaces (ZNS) mode with the passthru
backend. There is no support for a generic block device backend to
handle the ZBD devices which are not NVMe protocol compliant yet provide
NVMe ZNS interface.
This adds support to export the ZBDs (which are not NVMe drives) to host
the from target via NVMeOF using the host side ZNS interface.
The patch series is generated in bottom-top manner where, it first adds
prep patch and ZNS command-specific handlers on the top of genblk and
updates the data structures, then one by one it wires up the admin cmds
in the order host calls them in namespace initializing sequence. Once
everything is ready, it wires-up the I/O command handlers. See below for
patch-series overview.
All the testcases are passing for the ZoneFS with ZBD exported with NVMeOF
backed by null_blk ZBD and null_blk ZBD without NVMeOF.
Please consider this for nvme-5.11.
Regards,
Chaitanya
Changes from V3:-
1. Get rid of the bio_max_zasl check.
2. Remove extra lines.
4. Remove the block layer api export patch.
5. Remove the bvec check in the bio_iov_iter_get_pages() for
REQ_OP_ZONE_APPEND so that we can reuse the code.
Changes from V2:-
1. Move conventional zone bitmap check into
nvmet_bdev_validate_zns_zones().
2. Don't use report zones call to check the runt zone.
3. Trim nvmet_zasl() helper.
4. Fix typo in the nvmet_zns_update_zasl().
5. Remove the comment and fix the mdts calculation in
nvmet_execute_identify_cns_cs_ctrl().
6. Use u64 for bufsize in nvmet_bdev_execute_zone_mgmt_recv().
7. Remove nvmet_zones_to_desc_size() and fix the nr_zones
calculation.
8. Remove the op variable in nvmet_bdev_execute_zone_append().
9. Fix the nr_zones calculation nvmet_bdev_execute_zone_mgmt_recv().
10. Update cover letter subject.
Changes from V1:-
1. Remove the nvmet-$(CONFIG_BLK_DEV_ZONED) += zns.o.
2. Mark helpers inline.
3. Fix typos in the comments and update the comments.
4. Get rid of the curly brackets.
5. Don't allow drives with last smaller zones.
6. Calculate the zasl as a function of ax_zone_append_sectors,
bio_max_pages so we don't have to split the bio.
7. Add global subsys->zasl and update the zasl when new namespace
is enabled.
8. Rmove the loop in the nvmet_bdev_execute_zone_mgmt_recv() and
move functionality in to the report zone callback.
9. Add goto for default case in nvmet_bdev_execute_zone_mgmt_send().
10. Allocate the zones buffer with zones size instead of bdev nr_zones.
Chaitanya Kulkarni (9):
block: allow bvec for zone append get pages
nvmet: add ZNS support for bdev-ns
nvmet: trim down id-desclist to use req->ns
nvmet: add NVME_CSI_ZNS in ns-desc for zbdev
nvmet: add cns-cs-ctrl in id-ctrl for ZNS bdev
nvmet: add cns-cs-ns in id-ctrl for ZNS bdev
nvmet: add zns cmd effects to support zbdev
nvmet: add zns bdev config support
nvmet: add ZNS based I/O cmds handlers
block/bio.c | 2 -
drivers/nvme/target/Makefile | 2 +-
drivers/nvme/target/admin-cmd.c | 38 ++-
drivers/nvme/target/io-cmd-bdev.c | 12 +
drivers/nvme/target/io-cmd-file.c | 2 +-
drivers/nvme/target/nvmet.h | 19 ++
drivers/nvme/target/zns.c | 417 ++++++++++++++++++++++++++++++
7 files changed, 475 insertions(+), 17 deletions(-)
create mode 100644 drivers/nvme/target/zns.c
Test Results :-
# nvme zns id-ctrl /dev/nvme
NVMe ZNS Identify Controller:
zasl : 4
#
#
# nvme zns id-ctrl /dev/nvme1n1
NVMe ZNS Identify Controller:
zasl : 4
# nvme zns id-ns /dev/nvme1n1
#
#
ZNS Command Set Identify Namespace:
zoc : 0
ozcs : 0
mar : 0
mor : 0
rrl : 0
frl : 0
lbafe 0: zsze:0x10000 zdes:0 (in use)
#
#
#
# lsblk | grep null
nullb0 252:0 0 1G 0 disk
#
#
#
# ./zonefs-tests.sh /dev/nullb0
Gathering information on /dev/nullb0...
zonefs-tests on /dev/nullb0:
4 zones (0 conventional zones, 4 sequential zones)
524288 512B sectors zone size (256 MiB)
0 max open zones
Running tests
Test 0010: mkzonefs (options) ... PASS
Test 0011: mkzonefs (force format) ... PASS
Test 0012: mkzonefs (invalid device) ... PASS
Test 0013: mkzonefs (super block zone state) ... PASS
Test 0020: mount (default) ... PASS
Test 0021: mount (invalid device) ... PASS
Test 0022: mount (check mount directory sub-directories) ... PASS
Test 0023: mount (options) ... PASS
Test 0030: Number of files (default) ... PASS
Test 0031: Number of files (aggr_cnv) ... skip
Test 0032: Number of files using stat (default) ... PASS
Test 0033: Number of files using stat (aggr_cnv) ... PASS
Test 0034: Number of blocks using stat (default) ... PASS
Test 0035: Number of blocks using stat (aggr_cnv) ... PASS
Test 0040: Files permissions (default) ... PASS
Test 0041: Files permissions (aggr_cnv) ... skip
Test 0042: Files permissions (set value) ... PASS
Test 0043: Files permissions (set value + aggr_cnv) ... skip
Test 0050: Files owner (default) ... PASS
Test 0051: Files owner (aggr_cnv) ... skip
Test 0052: Files owner (set value) ... PASS
Test 0053: Files owner (set value + aggr_cnv) ... skip
Test 0060: Files size (default) ... PASS
Test 0061: Files size (aggr_cnv) ... skip
Test 0070: Conventional file truncate ... skip
Test 0071: Conventional file truncate (aggr_cnv) ... skip
Test 0072: Conventional file unlink ... skip
Test 0073: Conventional file unlink (aggr_cnv) ... skip
Test 0074: Conventional file random write ... skip
Test 0075: Conventional file random write (direct) ... skip
Test 0076: Conventional file random write (aggr_cnv) ... skip
Test 0077: Conventional file random write (aggr_cnv, direct) ... skip
Test 0078: Conventional file mmap read/write ... skip
Test 0079: Conventional file mmap read/write (aggr_cnv) ... skip
Test 0080: Sequential file truncate ... PASS
Test 0081: Sequential file unlink ... PASS
Test 0082: Sequential file buffered write IO ... PASS
Test 0083: Sequential file overwrite ... PASS
Test 0084: Sequential file unaligned write (sync IO) ... PASS
Test 0085: Sequential file unaligned write (async IO) ... PASS
Test 0086: Sequential file append (sync) ... PASS
Test 0087: Sequential file append (async) ... PASS
Test 0088: Sequential file random read ... PASS
Test 0089: Sequential file mmap read/write ... PASS
Test 0090: sequential file 4K synchronous write ... PASS
Test 0091: Sequential file large synchronous write ... PASS
46 / 46 tests passed
#
#
#
# ./zonefs-tests.sh /dev/nvme1n1
Gathering information on /dev/nvme1n1...
zonefs-tests on /dev/nvme1n1:
4 zones (0 conventional zones, 4 sequential zones)
524288 512B sectors zone size (256 MiB)
1 max open zones
Running tests
Test 0010: mkzonefs (options) ... PASS
Test 0011: mkzonefs (force format) ... PASS
Test 0012: mkzonefs (invalid device) ... PASS
Test 0013: mkzonefs (super block zone state) ... PASS
Test 0020: mount (default) ... PASS
Test 0021: mount (invalid device) ... PASS
Test 0022: mount (check mount directory sub-directories) ... PASS
Test 0023: mount (options) ... PASS
Test 0030: Number of files (default) ... PASS
Test 0031: Number of files (aggr_cnv) ... skip
Test 0032: Number of files using stat (default) ... PASS
Test 0033: Number of files using stat (aggr_cnv) ... PASS
Test 0034: Number of blocks using stat (default) ... PASS
Test 0035: Number of blocks using stat (aggr_cnv) ... PASS
Test 0040: Files permissions (default) ... PASS
Test 0041: Files permissions (aggr_cnv) ... skip
Test 0042: Files permissions (set value) ... PASS
Test 0043: Files permissions (set value + aggr_cnv) ... skip
Test 0050: Files owner (default) ... PASS
Test 0051: Files owner (aggr_cnv) ... skip
Test 0052: Files owner (set value) ... PASS
Test 0053: Files owner (set value + aggr_cnv) ... skip
Test 0060: Files size (default) ... PASS
Test 0061: Files size (aggr_cnv) ... skip
Test 0070: Conventional file truncate ... skip
Test 0071: Conventional file truncate (aggr_cnv) ... skip
Test 0072: Conventional file unlink ... skip
Test 0073: Conventional file unlink (aggr_cnv) ... skip
Test 0074: Conventional file random write ... skip
Test 0075: Conventional file random write (direct) ... skip
Test 0076: Conventional file random write (aggr_cnv) ... skip
Test 0077: Conventional file random write (aggr_cnv, direct) ... skip
Test 0078: Conventional file mmap read/write ... skip
Test 0079: Conventional file mmap read/write (aggr_cnv) ... skip
Test 0080: Sequential file truncate ... PASS
Test 0081: Sequential file unlink ... PASS
Test 0082: Sequential file buffered write IO ... PASS
Test 0083: Sequential file overwrite ... PASS
Test 0084: Sequential file unaligned write (sync IO) ... PASS
Test 0085: Sequential file unaligned write (async IO) ... PASS
Test 0086: Sequential file append (sync) ... PASS
Test 0087: Sequential file append (async) ... PASS
Test 0088: Sequential file random read ... PASS
Test 0089: Sequential file mmap read/write ... PASS
Test 0090: sequential file 4K synchronous write ... PASS
Test 0091: Sequential file large synchronous write ... PASS
46 / 46 tests passed
--
2.22.1
