On 09/11/2020 14:05, John Garry wrote:
On 09/11/2020 13:39, Qian Cai wrote:
I suppose I could try do this myself also, but an authentic version
would be nicer.
The closest one I have here is:
https://cailca.coding.net/public/linux/mm/git/files/master/arm64.config
but it only selects the Thunder X2 platform and needs to manually select
CONFIG_MEGARAID_SAS=m to start with, but none of arm64 systems here have
megaraid_sas.
Thanks, I'm confident I can fix it up to get it going on my Huawei arm64
D06CS.
So that board has a megaraid sas card. In addition, it also has hisi_sas
HW, which is another storage controller which we enabled this same
feature which is causing the problem.
I'll report back when I can.
So I had to hack that arm64 config a bit to get it booting:
https://github.com/hisilicon/kernel-dev/commits/private-topic-sas-5.10-megaraid-hang
Boot is ok on my board without the megaraid sas card, but includes
hisi_sas HW (which enables the equivalent option which is exposing the
problem).
But the board with the megaraid sas boots very slowly, specifically
around the megaraid sas probe:
: ttyS0 at MMIO 0x3f00002f8 (irq = 17, base_baud = 115200) is a 16550A
[ 50.023726][ T1] printk: console [ttyS0] enabled
[ 50.412597][ T1] megasas: 07.714.04.00-rc1
[ 50.436614][ T5] megaraid_sas 0000:08:00.0: FW now in Ready state
[ 50.450079][ T5] megaraid_sas 0000:08:00.0: 63 bit DMA mask and 63
bit consistent mask
[ 50.467811][ T5] megaraid_sas 0000:08:00.0: firmware supports msix
: (128)
[ 50.845995][ T5] megaraid_sas 0000:08:00.0: requested/available
msix 128/128
[ 50.861476][ T5] megaraid_sas 0000:08:00.0: current msix/online
cpus : (128/128)
[ 50.877616][ T5] megaraid_sas 0000:08:00.0: RDPQ mode : (enabled)
[ 50.891018][ T5] megaraid_sas 0000:08:00.0: Current firmware
supports maximum commands: 4077 LDIO threshold: 0
[ 51.262942][ T5] megaraid_sas 0000:08:00.0: Performance mode
:Latency (latency index = 1)
[ 51.280749][ T5] megaraid_sas 0000:08:00.0: FW supports sync cache
: Yes
[ 51.295451][ T5] megaraid_sas 0000:08:00.0:
megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 51.387474][ T5] megaraid_sas 0000:08:00.0: FW provided
supportMaxExtLDs: 1 max_lds: 64
[ 51.404931][ T5] megaraid_sas 0000:08:00.0: controller type
: MR(2048MB)
[ 51.419616][ T5] megaraid_sas 0000:08:00.0: Online Controller
Reset(OCR) : Enabled
[ 51.436132][ T5] megaraid_sas 0000:08:00.0: Secure JBOD support
: Yes
[ 51.450265][ T5] megaraid_sas 0000:08:00.0: NVMe passthru support
: Yes
[ 51.464757][ T5] megaraid_sas 0000:08:00.0: FW provided TM
TaskAbort/Reset timeout : 6 secs/60 secs
[ 51.484379][ T5] megaraid_sas 0000:08:00.0: JBOD sequence map
support : Yes
[ 51.499607][ T5] megaraid_sas 0000:08:00.0: PCI Lane Margining
support : No
[ 51.547610][ T5] megaraid_sas 0000:08:00.0: NVME page size
: (4096)
[ 51.608635][ T5] megaraid_sas 0000:08:00.0:
megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000
[ 51.630285][ T5] megaraid_sas 0000:08:00.0: INIT adapter done
[ 51.649854][ T5] megaraid_sas 0000:08:00.0: pci id
: (0x1000)/(0x0016)/(0x19e5)/(0xd215)
[ 51.667873][ T5] megaraid_sas 0000:08:00.0: unevenspan support : no
[ 51.681646][ T5] megaraid_sas 0000:08:00.0: firmware crash dump : no
[ 51.695596][ T5] megaraid_sas 0000:08:00.0: JBOD sequence map
: enabled
[ 51.711521][ T5] megaraid_sas 0000:08:00.0: Max firmware commands:
4076 shared with nr_hw_queues = 127
[ 51.733056][ T5] scsi host0: Avago SAS based MegaRAID driver
[ 65.304363][ T5] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
MZ7KH1T9 404Q PQ: 0 ANSI: 6
[ 65.392401][ T5] scsi 0:0:1:0: Direct-Access ATA SAMSUNG
MZ7KH1T9 404Q PQ: 0 ANSI: 6
[ 79.508307][ T5] scsi 0:0:65:0: Enclosure HUAWEI
Expander 12Gx16 131 PQ: 0 ANSI: 6
[ 183.965109][ C14] random: fast init done
Notice the 14 and 104 second delays.
But does boot fully to get to the console. I'll wait for further issues,
which you guys seem to experience after a while.
Thanks,
John
