On Fri, Oct 23, 2020 at 4:49 PM Ming Lei <ming.lei@xxxxxxxxxx> wrote:
>
> On Fri, Oct 23, 2020 at 02:46:32PM +0800, Weiping Zhang wrote:
> > Do not add io_ticks if there is no infligh io when start a new IO,
> > otherwise an extra 1 jiffy will be add to this IO.
> >
> > I run the following command on a host, with different kernel version.
> >
> > fio -name=test -ioengine=sync -bs=4K -rw=write
> > -filename=/home/test.fio.log -size=100M -time_based=1 -direct=1
> > -runtime=300 -rate=2m,2m
> >
> > If we run fio in a sync direct io mode, IO will be proccessed one by one,
> > you can see that there are 512 IOs completed in one second.
> >
> > kernel: 4.19.0
> >
> > Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
> > vda 0.00 0.00 0.00 512.00 0.00 2.00 8.00 0.21 0.40 0.00 0.40 0.40 20.60
> >
> > The averate io.latency is 0.4ms, so the disk time cost in one second
> > should be 0.4 * 512 = 204.8 ms, that means, %util should be 20%.
> >
> > Becase update_io_ticks will add a extra 1 jiffy(1ms) for every IO, the
> > io.latency io.latency will be 1 + 0.4 = 1.4ms,
> > 1.4 * 512 = 716.8ms, so the %util show it about 72%.
> >
> > Device r/s w/s rMB/s wMB/s rrqm/s wrqm/s %rrqm %wrqm r_await w_await aqu-sz rareq-sz wareq-sz svctm %util
> > vda 0.00 512.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.40 0.20 0.00 4.00 1.41 72.10
> >
> > After this patch:
> > Device r/s w/s rMB/s wMB/s rrqm/s wrqm/s %rrqm %wrqm r_await w_await aqu-sz rareq-sz wareq-sz svctm %util
> > vda 0.00 512.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.40 0.20 0.00 4.00 0.39 20.00
> >
> > Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting")
> > Signed-off-by: Weiping Zhang <zhangweiping@xxxxxxxxxxxxxx>
> > ---
> > block/blk-core.c | 19 ++++++++++++++-----
> > block/blk.h | 1 +
> > block/genhd.c | 2 +-
> > 3 files changed, 16 insertions(+), 6 deletions(-)
> >
> > diff --git a/block/blk-core.c b/block/blk-core.c
> > index ac00d2fa4eb4..789a5c40b6a6 100644
> > --- a/block/blk-core.c
> > +++ b/block/blk-core.c
> > @@ -1256,14 +1256,14 @@ unsigned int blk_rq_err_bytes(const struct request *rq)
> > }
> > EXPORT_SYMBOL_GPL(blk_rq_err_bytes);
> >
> > -static void update_io_ticks(struct hd_struct *part, unsigned long now, bool end)
> > +static void update_io_ticks(struct hd_struct *part, unsigned long now, bool inflight)
> > {
> > unsigned long stamp;
> > again:
> > stamp = READ_ONCE(part->stamp);
> > if (unlikely(stamp != now)) {
> > - if (likely(cmpxchg(&part->stamp, stamp, now) == stamp))
> > - __part_stat_add(part, io_ticks, end ? now - stamp : 1);
> > + if (likely(cmpxchg(&part->stamp, stamp, now) == stamp) && inflight)
> > + __part_stat_add(part, io_ticks, now - stamp);
> > }
> > if (part->partno) {
> > part = &part_to_disk(part)->part0;
> > @@ -1310,13 +1310,20 @@ void blk_account_io_done(struct request *req, u64 now)
> >
> > void blk_account_io_start(struct request *rq)
> > {
> > + struct hd_struct *part;
> > + struct request_queue *q;
> > + int inflight;
> > +
> > if (!blk_do_io_stat(rq))
> > return;
> >
> > rq->part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
> >
> > part_stat_lock();
> > - update_io_ticks(rq->part, jiffies, false);
> > + part = rq->part;
> > + q = part_to_disk(part)->queue;
> > + inflight = blk_mq_in_flight(q, part);
> > + update_io_ticks(part, jiffies, inflight > 0 ? true : false);
>
> Yeah, this account issue can be fixed by applying such 'inflight' info.
> However, blk_mq_in_flight() isn't cheap enough, I did get soft lockup
> report because of blk_mq_in_flight() called in I/O path.
>
> BTW, this way is just like reverting 5b18b5a73760 ("block: delete
> part_round_stats and switch to less precise counting").
>
>
Hello Ming,
Shall we switch it to atomic mode ? update inflight_count when
start/done for every IO.
Or any other cheaper way.
>
> Thanks,
> Ming
>
