Signed-off-by: Sagi Grimberg <sagi@xxxxxxxxxxx>
---
tests/nvme/002 | 2 +-
tests/nvme/003 | 4 ++--
tests/nvme/004 | 4 ++--
tests/nvme/005 | 4 ++--
tests/nvme/008 | 4 ++--
tests/nvme/009 | 4 ++--
tests/nvme/010 | 4 ++--
tests/nvme/011 | 4 ++--
tests/nvme/012 | 4 ++--
tests/nvme/013 | 4 ++--
tests/nvme/014 | 4 ++--
tests/nvme/015 | 4 ++--
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 4 ++--
tests/nvme/019 | 4 ++--
tests/nvme/020 | 4 ++--
tests/nvme/021 | 4 ++--
tests/nvme/022 | 4 ++--
tests/nvme/023 | 4 ++--
tests/nvme/024 | 4 ++--
tests/nvme/025 | 4 ++--
tests/nvme/026 | 4 ++--
tests/nvme/027 | 4 ++--
tests/nvme/028 | 4 ++--
tests/nvme/029 | 4 ++--
tests/nvme/031 | 4 ++--
tests/nvme/rc | 31 +++++++++++++++++++++++++++++--
28 files changed, 80 insertions(+), 53 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index aaa5ec4d729a..92779e8d28ca 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -31,7 +31,7 @@ test() {
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-$i"
done
- nvme discover -t loop | _filter_discovery
+ _nvme_discover loop | _filter_discovery
for ((i = iterations - 1; i >= 0; i--)); do
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-$i"
diff --git a/tests/nvme/003 b/tests/nvme/003
index fd696d9efe2c..83d1b2ff9cb0 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n nqn.2014-08.org.nvmexpress.discovery
+ _nvme_connect_subsys loop nqn.2014-08.org.nvmexpress.discovery
# This is ugly but checking for the absence of error messages is ...
sleep 10
@@ -42,7 +42,7 @@ test() {
echo "Fail"
fi
- nvme disconnect -n nqn.2014-08.org.nvmexpress.discovery
+ _nvme_disconnect_subsys nqn.2014-08.org.nvmexpress.discovery
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_subsystem "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/004 b/tests/nvme/004
index b841a8d4cd87..1a3eedd634cf 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -33,14 +33,14 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n blktests-subsystem-1
+ _nvme_connect_subsys loop blktests-subsystem-1
local nvmedev
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
- nvme disconnect -n "blktests-subsystem-1"
+ _nvme_disconnect_subsys blktests-subsystem-1
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_subsystem "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/005 b/tests/nvme/005
index df0900b372be..708e37766e0e 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -33,7 +33,7 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n blktests-subsystem-1
+ _nvme_connect_subsys loop blktests-subsystem-1
local nvmedev
nvmedev="$(_find_nvme_loop_dev)"
@@ -42,7 +42,7 @@ test() {
echo 1 > "/sys/class/nvme/${nvmedev}/reset_controller"
- nvme disconnect -d "${nvmedev}"
+ _nvme_disconnect_ctrl ${nvmedev}
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index f19de17fefac..177a1f27dcd6 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -42,7 +42,7 @@ test() {
udevadm settle
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/009 b/tests/nvme/009
index 4afbe62864f6..621eec668926 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -30,7 +30,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -38,7 +38,7 @@ test() {
udevadm settle
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/010 b/tests/nvme/010
index 53b97484615f..3a629469014f 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -42,7 +42,7 @@ test() {
_run_fio_verify_io --size=950m --filename="/dev/${nvmedev}n1"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/011 b/tests/nvme/011
index a54583d5c582..068090a0f42d 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
_run_fio_verify_io --size=950m --filename="/dev/${nvmedev}n1"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/012 b/tests/nvme/012
index 0049c3d8ceb6..4cab4c1891a9 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -38,7 +38,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -54,7 +54,7 @@ test() {
umount "${mount_dir}" > /dev/null 2>&1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 622706ec4088..b646f08be26a 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -35,7 +35,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -51,7 +51,7 @@ test() {
umount "${mount_dir}" > /dev/null 2>&1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/014 b/tests/nvme/014
index 9517230253ab..979f77009209 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
nvme flush "/dev/${nvmedev}" -n 1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/015 b/tests/nvme/015
index 40b850974b43..ecd23b206e25 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
nvme flush "/dev/${nvmedev}n1" -n 1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/016 b/tests/nvme/016
index e1bad2f81461..a2b22adfc6b9 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -33,7 +33,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "$port" "${subsys_nqn}"
- nvme discover -t loop | _filter_discovery
+ _nvme_discover loop | _filter_discovery
_remove_nvmet_subsystem_from_port "${port}" "${subsys_nqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/017 b/tests/nvme/017
index 2e6d649f9b65..7ec146ec7414 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -36,7 +36,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme discover -t loop | _filter_discovery
+ _nvme_discover loop | _filter_discovery
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/018 b/tests/nvme/018
index e39613709c90..9b5abefd39d2 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -46,7 +46,7 @@ test() {
nvme read "/dev/${nvmedev}n1" -s "$sectors" -c 0 -z "$bs" &>"$FULL" \
&& echo "ERROR: nvme read for out of range LBA was not rejected"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 86a2a2945b35..5bc68e4514f9 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -36,7 +36,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/020 b/tests/nvme/020
index ccadec6a5822..32f7490b0796 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys ${subsys_name}
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/021 b/tests/nvme/021
index bbcb9d56a350..c10c09277cff 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: device not listed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 452e7b3d196c..f7286ef008e0 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: reset failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/023 b/tests/nvme/023
index 2714571d16d9..0b93fe95954b 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
echo "ERROR: smart-log bdev-ns failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/024 b/tests/nvme/024
index 1f87bd19ec69..174fdc74a4e1 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme smart-log "/dev/${nvmedev}" -n 1 >> "$FULL" 2>&1; then
echo "ERROR: smart-log file-ns failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 1b9e33351f61..7f90a57861bd 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: effects-log failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/026 b/tests/nvme/026
index 21a265a630ba..5af08b753fe9 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: ns-desc failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/027 b/tests/nvme/027
index d7d33796e122..445f4fc65306 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme ns-rescan "/dev/${nvmedev}" >> "$FULL" 2>&1; then
echo "ERROR: ns-rescan failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/028 b/tests/nvme/028
index 1643857437e8..70f6462bb9f3 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme list-subsys 2>> "$FULL" | grep -q loop; then
echo "ERROR: list-subsys"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/029 b/tests/nvme/029
index 9f437285d085..873e54e7e43a 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -67,7 +67,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys loop ${subsys_name}
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -81,7 +81,7 @@ test() {
test_user_io "$dev" 511 1023 > "$FULL" 2>&1 || echo FAIL
test_user_io "$dev" 511 1025 > "$FULL" 2>&1 || echo FAIL
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys ${subsys_name} >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/031 b/tests/nvme/031
index 7e7ee7327e62..7053553cb837 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -41,8 +41,8 @@ test() {
for ((i = 0; i < iterations; i++)); do
_create_nvmet_subsystem "${subsys}$i" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "${subsys}$i"
- nvme connect -t loop -n "${subsys}$i"
- nvme disconnect -n "${subsys}$i" >> "${FULL}" 2>&1
+ _nvme_connect_subsys loop "${subsys}$i"
+ _nvme_disconnect_subsys "${subsys}$i" >> "${FULL}" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys}$i"
_remove_nvmet_subsystem "${subsys}$i"
done
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 320aa4b2b475..db19d50131e9 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -64,7 +64,7 @@ _cleanup_nvmet() {
transport="$(cat "/sys/class/nvme/${dev}/transport")"
if [[ "$transport" == "loop" ]]; then
echo "WARNING: Test did not clean up loop device: ${dev}"
- nvme disconnect -d "${dev}"
+ _nvme_disconnect_ctrl "${dev}"
fi
done
@@ -97,6 +97,33 @@ _setup_nvmet() {
modprobe nvme-loop
}
+_nvme_disconnect_ctrl() {
+ local ctrl="$1"
+
+ nvme disconnect -d "${ctrl}"
+}
+
+_nvme_disconnect_subsys() {
+ local subsysnqn="$1"
+
+ nvme disconnect -n "${subsysnqn}"
+}
+
+_nvme_connect_subsys() {
+ local trtype="$1"
+ local subsysnqn="$2"
+
+ ARGS=(-t "${trtype}" -n "${subsysnqn}")
+ nvme connect "${ARGS[@]}"
+}
+
+_nvme_discover() {
+ local trtype="$1"
+
+ ARGS=(-t "${trtype}" -n "${subsysnqn}")
+ nvme discover "${ARGS[@]}"
+}
+
_create_nvmet_port() {
local trtype="$1"
@@ -206,6 +233,6 @@ _filter_discovery() {
}
_discovery_genctr() {
- nvme discover -t loop |
+ _nvme_discover loop |
sed -n -e 's/^.*Generation counter \([0-9]\+\).*$/\1/p'
}
--
2.25.1
