On Tue, Aug 04, 2020 at 03:50:32PM +0800, Coly Li wrote:
> On 2020/8/4 14:01, Ming Lei wrote:
> > On Tue, Aug 04, 2020 at 12:29:07PM +0800, Coly Li wrote:
> >> On 2020/8/4 12:15, Ming Lei wrote:
> >>> In case of block device backend, if the backend supports discard, the
> >>> loop device will set queue flag of QUEUE_FLAG_DISCARD.
> >>>
> >>> However, limits.discard_granularity isn't setup, and this way is wrong,
> >>> see the following description in Documentation/ABI/testing/sysfs-block:
> >>>
> >>> A discard_granularity of 0 means that the device does not support
> >>> discard functionality.
> >>>
> >>> Especially 9b15d109a6b2 ("block: improve discard bio alignment in
> >>> __blkdev_issue_discard()") starts to take q->limits.discard_granularity
> >>> for computing max discard sectors. And zero discard granularity causes
> >>> kernel oops[1].
> >>>
> >>> Fix the issue by set up discard granularity and alignment.
> >>>
> >>> [1] kernel oops when use block disk as loop backend:
> >>>
> >>> [ 33.405947] ------------[ cut here ]------------
> >>> [ 33.405948] kernel BUG at block/blk-mq.c:563!
> >>> [ 33.407504] invalid opcode: 0000 [#1] SMP PTI
> >>> [ 33.408245] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.8.0-rc2_update_rq+ #17
> >>> [ 33.409466] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx2.fedor4
> >>> [ 33.411546] RIP: 0010:blk_mq_end_request+0x1c/0x2a
> >>> [ 33.412354] Code: 48 89 df 5b 5d 41 5c 41 5d e9 2d fe ff ff 0f 1f 44 00 00 55 48 89 fd 53 40 0f b6 de 8b 57 5
> >>> [ 33.415724] RSP: 0018:ffffc900019ccf48 EFLAGS: 00010202
> >>> [ 33.416688] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffff88826f2600c0
> >>> [ 33.417990] RDX: 0000000000200042 RSI: 0000000000000001 RDI: ffff888270c13100
> >>> [ 33.419286] RBP: ffff888270c13100 R08: 0000000000000001 R09: ffffffff81345144
> >>> [ 33.420584] R10: ffff88826f260600 R11: 0000000000000000 R12: ffff888270c13100
> >>> [ 33.421881] R13: ffffffff820050c0 R14: 0000000000000004 R15: 0000000000000004
> >>> [ 33.423053] FS: 0000000000000000(0000) GS:ffff888277d80000(0000) knlGS:0000000000000000
> >>> [ 33.424360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>> [ 33.425416] CR2: 00005581d7903f08 CR3: 00000001e9a16002 CR4: 0000000000760ee0
> >>> [ 33.426580] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >>> [ 33.427706] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >>> [ 33.428910] PKRU: 55555554
> >>> [ 33.429412] Call Trace:
> >>> [ 33.429858] <IRQ>
> >>> [ 33.430189] blk_done_softirq+0x84/0xa4
> >>> [ 33.430884] __do_softirq+0x11a/0x278
> >>> [ 33.431567] asm_call_on_stack+0x12/0x20
> >>> [ 33.432283] </IRQ>
> >>> [ 33.432673] do_softirq_own_stack+0x31/0x40
> >>> [ 33.433448] __irq_exit_rcu+0x46/0xae
> >>> [ 33.434132] sysvec_call_function_single+0x7d/0x8b
> >>> [ 33.435021] asm_sysvec_call_function_single+0x12/0x20
> >>> [ 33.435965] RIP: 0010:native_safe_halt+0x7/0x8
> >>> [ 33.436795] Code: 25 c0 7b 01 00 f0 80 60 02 df f0 83 44 24 fc 00 48 8b 00 a8 08 74 0b 65 81 25 db 38 95 7e b
> >>> [ 33.440179] RSP: 0018:ffffc9000191fee0 EFLAGS: 00000246
> >>> [ 33.441143] RAX: ffffffff816c4118 RBX: 0000000000000000 RCX: ffff888276631a00
> >>> [ 33.442442] RDX: 000000000000ddfe RSI: 0000000000000003 RDI: 0000000000000001
> >>> [ 33.443742] RBP: 0000000000000000 R08: 00000000f461e6ac R09: 0000000000000004
> >>> [ 33.445046] R10: 8080808080808080 R11: fefefefefefefeff R12: 0000000000000000
> >>> [ 33.446352] R13: 0000000000000003 R14: ffffffffffffffff R15: 0000000000000000
> >>> [ 33.447450] ? ldsem_down_write+0x1f5/0x1f5
> >>> [ 33.448158] default_idle+0x1b/0x2c
> >>> [ 33.448809] do_idle+0xf9/0x248
> >>> [ 33.449392] cpu_startup_entry+0x1d/0x1f
> >>> [ 33.450118] start_secondary+0x168/0x185
> >>> [ 33.450843] secondary_startup_64+0xa4/0xb0
> >>> [ 33.451612] Modules linked in: scsi_debug iTCO_wdt iTCO_vendor_support nvme nvme_core i2c_i801 lpc_ich virtis
> >>> [ 33.454292] Dumping ftrace buffer:
> >>> [ 33.454951] (ftrace buffer empty)
> >>> [ 33.455626] ---[ end trace beece202d663d38f ]---
> >>>
> >>> Fixes: 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()")
> >>> Cc: Coly Li <colyli@xxxxxxx>
> >>> Cc: Hannes Reinecke <hare@xxxxxxxx>
> >>> Cc: Xiao Ni <xni@xxxxxxxxxx>
> >>> Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
> >>> Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
> >>> ---
> >>> drivers/block/loop.c | 5 +++++
> >>> 1 file changed, 5 insertions(+)
> >>>
> >>> diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> >>> index d18160146226..6102370bee35 100644
> >>> --- a/drivers/block/loop.c
> >>> +++ b/drivers/block/loop.c
> >>> @@ -890,6 +890,11 @@ static void loop_config_discard(struct loop_device *lo)
> >>> struct request_queue *backingq;
> >>>
> >>> backingq = bdev_get_queue(inode->i_bdev);
> >>> +
> >>> + q->limits.discard_granularity =
> >>> + queue_physical_block_size(backingq);
> >>> + q->limits.discard_alignment = 0;
> >>> +
> >>> blk_queue_max_discard_sectors(q,
> >>> backingq->limits.max_write_zeroes_sectors);
> >>>
> >>>
> >>
> >> Hi Ming,
> >>
> >> I did similar change, it can avoid the panic or 0 length discard bio.
> >> But yesterday I realize the discard request to loop device should not go
> >> into __blkdev_issue_discard(). As commit c52abf563049 ("loop: Better
> >> discard support for block devices") mentioned it should go into
> >> blkdev_issue_zeroout(), this is why in loop_config_discard() the
> >> max_discard_sectors is set to backingq->limits.max_write_zeroes_sectors.
> >
> > That commit meant REQ_OP_DISCARD on a loop device is translated into
> > blkdev_issue_zeroout(), because REQ_OP_DISCARD is handled as
> > file->f_op->fallocate(FALLOC_FL_PUNCH_HOLE), which will cause
> > "subsequent reads from this range will return zeroes".
> >
> >>
> >> Now I am looking at the problem why discard request on loop device
> >> doesn't go into blkdev_issue_zeroout().
> >
> > No, that is correct behavior, since loop can support discard or zeroout.
> >
> > If QUEUE_FLAG_DISCARD is set, either discard_granularity or max discard
> > sectors shouldn't be zero.
> >
> > This patch shouldn't set discard_granularity if limits.max_write_zeroes_sectors
> > is zero, will fix it in V2.
> >
> >>
> >> With the above change, the discard is very slow on loop device with
> >> backing device. In my testing, mkfs.xfs on /dev/loop0 does not complete
> >> in 20 minutes, each discard request is only 4097 sectors.
> >
> > I'd suggest you to check the discard related queue limits, and see why
> > each discard request just sends 4097 sectors.
> >
> > Or we need to mirror underlying queue's discard_granularity too? Can you
> > try the following patch?
>
> Can I know the exact command line to reproduce the panic ?
modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1
losetup -f /dev/sdc --direct-io=on #suppose /dev/sdc is the scsi_debug LUN
mkfs.ext4 /dev/loop0 #suppose loop0 is the loop backed by /dev/sdc
mount /dev/loop0 /mnt
cd /mnt
dbench -t 20 -s 64
>
> I try to use blkdiscard, or dbench -D /mount_point_to_loop0, and see all
> the discard requests go into blkdev_fallocate()=>blkdev_issue_zeroout().
> No request goes into __blkdev_issue_discard().
The issue isn't related with backend queue, and it is triggered on
loop's request.
Thanks,
Ming
