[PATCH v3 3/3] skd: use generic power management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Drivers using legacy power management .suspen()/.resume() callbacks
have to manage PCI states and device's PM states themselves. They also
need to take care of standard configuration registers.

Switch to generic power management framework using a single
"struct dev_pm_ops" variable to take the unnecessary load from the driver.
This also avoids the need for the driver to directly call most of the PCI
helper functions and device power state control functions, as through
the generic framework PCI Core takes care of the necessary operations,
and drivers are required to do only device-specific jobs.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>
---
 drivers/block/skd_main.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index 51569c199a6c..7f2d42900b38 100644
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -3315,10 +3315,11 @@ static void skd_pci_remove(struct pci_dev *pdev)
 	return;
 }
 
-static int skd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused skd_pci_suspend(struct device *dev)
 {
 	int i;
 	struct skd_device *skdev;
+	struct pci_dev *pdev = to_pci_dev(dev);
 
 	skdev = pci_get_drvdata(pdev);
 	if (!skdev) {
@@ -3337,18 +3338,15 @@ static int skd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (skdev->pcie_error_reporting_is_enabled)
 		pci_disable_pcie_error_reporting(pdev);
 
-	pci_release_regions(pdev);
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 	return 0;
 }
 
-static int skd_pci_resume(struct pci_dev *pdev)
+static int __maybe_unused skd_pci_resume(struct device *dev)
 {
 	int i;
 	int rc = 0;
 	struct skd_device *skdev;
+	struct pci_dev *pdev = to_pci_dev(dev);
 
 	skdev = pci_get_drvdata(pdev);
 	if (!skdev) {
@@ -3356,16 +3354,8 @@ static int skd_pci_resume(struct pci_dev *pdev)
 		return -1;
 	}
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_enable_wake(pdev, PCI_D0, 0);
-	pci_restore_state(pdev);
+	device_wakeup_disable(dev);
 
-	rc = pci_enable_device(pdev);
-	if (rc)
-		return rc;
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc)
-		goto err_out;
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc)
 		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
@@ -3374,7 +3364,6 @@ static int skd_pci_resume(struct pci_dev *pdev)
 		goto err_out_regions;
 	}
 
-	pci_set_master(pdev);
 	rc = pci_enable_pcie_error_reporting(pdev);
 	if (rc) {
 		dev_err(&pdev->dev,
@@ -3427,10 +3416,6 @@ static int skd_pci_resume(struct pci_dev *pdev)
 		pci_disable_pcie_error_reporting(pdev);
 
 err_out_regions:
-	pci_release_regions(pdev);
-
-err_out:
-	pci_disable_device(pdev);
 	return rc;
 }
 
@@ -3450,13 +3435,14 @@ static void skd_pci_shutdown(struct pci_dev *pdev)
 	skd_stop_device(skdev);
 }
 
+static SIMPLE_DEV_PM_OPS(skd_pci_pm_ops, skd_pci_suspend, skd_pci_resume);
+
 static struct pci_driver skd_driver = {
 	.name		= DRV_NAME,
 	.id_table	= skd_pci_tbl,
 	.probe		= skd_pci_probe,
 	.remove		= skd_pci_remove,
-	.suspend	= skd_pci_suspend,
-	.resume		= skd_pci_resume,
+	.driver.pm	= &skd_pci_pm_ops,
 	.shutdown	= skd_pci_shutdown,
 };
 
-- 
2.27.0




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux