Re: [RFC PATCH v4 4/4] scsi: ufs-qcom: add Inline Crypto Engine support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/7/20 1:08 PM, Eric Biggers wrote:
> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
>> Hi Thara,
>>
>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
>>>
>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
>>>> From: Eric Biggers <ebiggers@xxxxxxxxxx>
>>>>
>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
>>>>
>>>> The standards-compliant parts, such as querying the crypto capabilities
>>>> and enabling crypto for individual UFS requests, are already handled by
>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
>>>> However, ICE requires vendor-specific init, enable, and resume logic,
>>>> and it requires that keys be programmed and evicted by vendor-specific
>>>> SMC calls.  Make the ufs-qcom driver handle these details.
>>>>
>>>> I tested this on Dragonboard 845c, which is a publicly available
>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
>>>> phones.  This testing included (among other things) verifying that the
>>>> expected ciphertext was produced, both manually using ext4 encryption
>>>> and automatically using a block layer self-test I've written.
>>> Hello Eric,
>>>
>>> I am interested in testing out this series on 845, 855 and if possile on 865
>>> platforms. Can you give me some more details about your testing please.
>>>
>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
>>
>> A basic manual test would be:
>>
>> 1. Build a kernel with:
>>
>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
>> 	CONFIG_FS_ENCRYPTION=y
>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
>
> - Eric

I took a look into this as well - is v12 the latest of the fscrypt
inline crypto patches?

I see a EXPORT_SYMBOL_GPL(fscrypt_inode_uses_inline_crypto) but it seems
like it should be EXPORT_SYMBOL_GPL(__fscrypt_inode_uses_inline_crypto)
otherwise you end up with


WARNING: modpost: "fscrypt_inode_uses_inline_crypto" [vmlinux] is a
static EXPORT_SYMBOL_GPL


when you have something like CONFIG_F2FS_FS=m


Apologies but I'm not sure where the original patchset is to send as a
reply to them.




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux