[PATCH V3 0/3] null_blk: add tracepoints for zoned mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jens,

Recently we've added several new operations for zoned block devices
blk-zone.c (ZBD). These operations have a direct effect on the
zone-state machine present in the null_blk_zoned.c. 

This will allow us to add new testcases in blktests in order to verify
the correct operations on the driver side.

This is a small patch series which adds tracepoints for the null_blk
block driver when configured in a zoned mode (with command line
parameter zoned=1).

The first patch is a prep patch that adds a helper to stringify zone
conditions which we use in the trace, the second patch adds new
tracepoint definitions and the third patch allows null_blk_zoned to
trace operations.

Please have a look at the end for sample test output which has tests
for CONFIG_BLK_DEV_ZONED and !CONFIG_BLK_DEV_ZONED.

Regards,
Chaitanya              

Changes from V2 : -

1. Only compile null_blk_trace.c file if tracing and blk_dev_zoned is
   enabled.
2. Add a test log with and without CONFIG_BLK_DEV_ZONED.
3. Move Change log to the cover-letter.
4. Declare blk_zone_cond_str() without any CONFIG_BLK_DEV_ZONED
   conditions. 
5. Add a comment to the ${KDIR_HOME}/drivers/block/Makefile about
   whay we need ccflags-y.
6. Fix cover-letter header.
7. Add a copyright banner in null_blk_trace.c.

Changes from V1 : -

1. Move blk_zone_cond_str() to blk-zoned.c.
2. Mark zone_cond_namd array static.
3. Remove BLK_ZONE_COND_LAST.
4. Get rid of inline prefix for blk_zone_cond_str().
5. Use CONFIG_BLK_DEV_ZONE for null_blk_trace.o. 

Chaitanya Kulkarni (3):
  block: add a zone condition debug helper
  null_blk: add tracepoint helpers for zoned mode
  null_blk: add trace in null_blk_zoned.c

 block/blk-zoned.c              | 32 ++++++++++++++
 drivers/block/Makefile         |  6 +++
 drivers/block/null_blk_trace.c | 21 +++++++++
 drivers/block/null_blk_trace.h | 79 ++++++++++++++++++++++++++++++++++
 drivers/block/null_blk_zoned.c | 12 +++++-
 include/linux/blkdev.h         |  3 ++
 6 files changed, 152 insertions(+), 1 deletion(-)
 create mode 100644 drivers/block/null_blk_trace.c
 create mode 100644 drivers/block/null_blk_trace.h

Test Results :-

1. With CONFIG_BLK_DEV_ZONED DISABLED :-
----------------------------------------

# zcat /proc/config.gz | grep BLK_DEV_ZONED 
# CONFIG_BLK_DEV_ZONED is not set
# makej M=drivers/block
  MODPOST 11 modules
  CC [M]  drivers/block/brd.mod.o
  CC [M]  drivers/block/floppy.mod.o
  CC [M]  drivers/block/loop.mod.o
  CC [M]  drivers/block/mtip32xx/mtip32xx.mod.o
  CC [M]  drivers/block/null_blk.mod.o    <---
  CC [M]  drivers/block/pktcdvd.mod.o
  CC [M]  drivers/block/rbd.mod.o
  CC [M]  drivers/block/sx8.mod.o
  CC [M]  drivers/block/virtio_blk.mod.o
  CC [M]  drivers/block/xen-blkfront.mod.o
  CC [M]  drivers/block/zram/zram.mod.o
  LD [M]  drivers/block/xen-blkfront.ko
  LD [M]  drivers/block/brd.ko
  LD [M]  drivers/block/rbd.ko
  LD [M]  drivers/block/virtio_blk.ko
  LD [M]  drivers/block/sx8.ko
  LD [M]  drivers/block/floppy.ko
  LD [M]  drivers/block/null_blk.ko       <---
  LD [M]  drivers/block/pktcdvd.ko
  LD [M]  drivers/block/loop.ko
  LD [M]  drivers/block/zram/zram.ko
  LD [M]  drivers/block/mtip32xx/mtip32xx.ko
# insmod drivers/block/null_blk.ko 
# dmesg  -c
[ 1610.279303] null_blk: loading out-of-tree module taints kernel.
[ 1610.279390] null_blk: module verification failed: signature and/or required key missing - tainting kernel
[ 1610.290823] null_blk: module loaded
# rmmod  drivers/block/null_blk.ko 
# insmod drivers/block/null_blk.ko zoned=1
insmod: ERROR: could not insert module drivers/block/null_blk.ko: Invalid parameters
# dmesg  -c
[ 1627.347747] null_blk: CONFIG_BLK_DEV_ZONED not enabled
# ls /sys/kernel/debug/tracing/events/ | grep null
# echo $?
1

2. With CONFIG_BLK_DEV_ZONED ENABLED :-
---------------------------------------

# zcat /proc/config.gz | grep BLK_DEV_ZONED
CONFIG_BLK_DEV_ZONED=y
# makej M=drivers/block/
  AR      drivers/block//built-in.a
  CC [M]  drivers/block//floppy.o
  CC [M]  drivers/block//brd.o
  CC [M]  drivers/block//loop.o
  CC [M]  drivers/block//pktcdvd.o
  CC [M]  drivers/block//virtio_blk.o
  CC [M]  drivers/block//zram/zcomp.o
  CC [M]  drivers/block//mtip32xx/mtip32xx.o
  CC [M]  drivers/block//sx8.o
  CC [M]  drivers/block//zram/zram_drv.o
  CC [M]  drivers/block//rbd.o
  CC [M]  drivers/block//xen-blkfront.o
  CC [M]  drivers/block//null_blk_main.o  <---
  CC [M]  drivers/block//null_blk_trace.o <---
  CC [M]  drivers/block//null_blk_zoned.o <---
  LD [M]  drivers/block//zram/zram.o
  LD [M]  drivers/block//null_blk.o
  MODPOST 11 modules
  CC [M]  drivers/block//brd.mod.o
  CC [M]  drivers/block//floppy.mod.o
  CC [M]  drivers/block//loop.mod.o
  CC [M]  drivers/block//mtip32xx/mtip32xx.mod.o
  CC [M]  drivers/block//null_blk.mod.o   <---
  CC [M]  drivers/block//pktcdvd.mod.o
  CC [M]  drivers/block//rbd.mod.o
  CC [M]  drivers/block//sx8.mod.o
  CC [M]  drivers/block//virtio_blk.mod.o
  CC [M]  drivers/block//xen-blkfront.mod.o
  CC [M]  drivers/block//zram/zram.mod.o
  LD [M]  drivers/block//pktcdvd.ko
  LD [M]  drivers/block//floppy.ko
  LD [M]  drivers/block//brd.ko
  LD [M]  drivers/block//mtip32xx/mtip32xx.ko
  LD [M]  drivers/block//loop.ko
  LD [M]  drivers/block//virtio_blk.ko
  LD [M]  drivers/block//null_blk.ko
  LD [M]  drivers/block//rbd.ko
  LD [M]  drivers/block//xen-blkfront.ko
  LD [M]  drivers/block//sx8.ko
  LD [M]  drivers/block//zram/zram.ko
# insmod drivers/block/null_blk.ko
# dmesg -c
[  543.576548] null_blk: module loaded
# lsblk | grep nullb0
nullb0          252:0    0   250G  0 disk 
# rmmod null_blk
# insmod drivers/block/null_blk.ko zoned=1 zone_size=128 gb=1
# dmesg -c
[  543.654579] null_blk: module loaded
# lsblk | grep nullb0
nullb0          252:0    0     1G  0 disk 
# blkzone report /dev/nullb0
  start: 0x000000000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, capacity: 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
# echo 1 > /sys/kernel/debug/tracing/events/nullb/enable 
# for i in open close finish reset; do blkzone $i /dev/nullb0 ; done
# cat /sys/kernel/debug/tracing/trace_pipe 
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=0 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=1 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=2 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=3 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=4 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=5 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=6 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_OPEN       zone_no=7 zone_cond=EXP_OPEN  
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=0 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=1 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=2 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=3 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=4 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=5 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=6 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_CLOSE      zone_no=7 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=0 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=1 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=2 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=3 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=4 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=5 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=6 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_FINISH     zone_no=7 zone_cond=FULL      
   nullb_zone_op: disk=nullb0,  req=ZONE_RESET_ALL  zone_no=0 zone_cond=EMPTY     
   nullb_zone_op: disk=nullb0,  req=WRITE           zone_no=0 zone_cond=IMP_OPEN  
   nullb_zone_op: disk=nullb0,  req=WRITE           zone_no=0 zone_cond=IMP_OPEN  
   nullb_zone_op: disk=nullb0,  req=WRITE           zone_no=0 zone_cond=IMP_OPEN  
   nullb_zone_op: disk=nullb0,  req=WRITE           zone_no=0 zone_cond=IMP_OPEN  
   nullb_zone_op: disk=nullb0,  req=WRITE           zone_no=0 zone_cond=IMP_OPEN  

-- 
2.22.0




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux