Re: [PATCH v11 00/25] mm/gup: track dma-pinned pages: FOLL_PIN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/20/19 10:48 AM, Leon Romanovsky wrote:
...
>> test_query_qp (tests.test_qp.QPTest) ... ok
>> test_rdmacm_sync_traffic (tests.test_rdmacm.CMTestCase) ... skipped 'No devices with net interface'
>>
>> ======================================================================
>> FAIL: test_query_port (tests.test_device.DeviceTest)
>> ----------------------------------------------------------------------
>> Traceback (most recent call last):
>>   File "/kernel_work/rdma-core/tests/test_device.py", line 129, in test_query_port
>>     self.verify_port_attr(port_attr)
>>   File "/kernel_work/rdma-core/tests/test_device.py", line 113, in verify_port_attr
>>     assert 'Invalid' not in d.speed_to_str(attr.active_speed)
>> AssertionError
> 
> I'm very curious how did you get this assert "d.speed_to_str" covers all
> known speeds according to the IBTA.
> 

Hi Leon,

Short answer: I can make that one pass, with a small fix the the rdma-core test
suite:

commit a1b9fb0846e1b2356d7a16f4fbdd1960cf8dcbe5 (HEAD -> fix_speed_to_str)
Author: John Hubbard <jhubbard@xxxxxxxxxx>
Date:   Fri Dec 20 15:07:47 2019 -0800

    device: fix speed_to_str(), to handle disabled links
    
    For disabled links, the raw speed token is 0. However,
    speed_to_str() doesn't have that in the list. This leads
    to an assertion when running tests (test_query_port) when
    one link is down and other link(s) are up.
    
    Fix this by returning '(Disabled/down)' for the zero speed
    case.

diff --git a/pyverbs/device.pyx b/pyverbs/device.pyx
index 33d133fd..f8b7826b 100755
--- a/pyverbs/device.pyx
+++ b/pyverbs/device.pyx
@@ -923,8 +923,8 @@ def width_to_str(width):
 
 
 def speed_to_str(speed):
-    l = {1: '2.5 Gbps', 2: '5.0 Gbps', 4: '5.0 Gbps', 8: '10.0 Gbps',
-         16: '14.0 Gbps', 32: '25.0 Gbps', 64: '50.0 Gbps'}
+    l = {0: '(Disabled/down)', 1: '2.5 Gbps', 2: '5.0 Gbps', 4: '5.0 Gbps',
+         8: '10.0 Gbps', 16: '14.0 Gbps', 32: '25.0 Gbps', 64: '50.0 Gbps'}
     try:
         return '{s} ({n})'.format(s=l[speed], n=speed)
     except KeyError:


Longer answer:
==============

It looks like this test suite assumes that every link is connected! (Probably
in most test systems, they are.) But in my setup, the ConnectX cards each have
two slots, and I only have (and only need) one cable. So one link is up, and
the other is disabled. 

This leads to the other problem, which is that if a link is disabled, the
test suite finds a "0" token for attr.active_speed. That token is not in the
approved list, and so d.speed_to_str() asserts.

With some diagnostics added, I can see it checking each link: one passes, and
the other asserts:

diff --git a/tests/test_device.py b/tests/test_device.py
index 524e0e89..7b33d7db 100644
--- a/tests/test_device.py
+++ b/tests/test_device.py
@@ -110,6 +110,12 @@ class DeviceTest(unittest.TestCase):
         assert 'Invalid' not in d.translate_mtu(attr.max_mtu)
         assert 'Invalid' not in d.translate_mtu(attr.active_mtu)
         assert 'Invalid' not in d.width_to_str(attr.active_width)
+        print("")
+        print('Diagnostics ===========================================')
+        print('phys_state:    ', d.phys_state_to_str(attr.phys_state))
+        print('active_width): ', d.width_to_str(attr.active_width))
+        print('active_speed:  ',   d.speed_to_str(attr.active_speed))
+        print('END of Diagnostics ====================================')
         assert 'Invalid' not in d.speed_to_str(attr.active_speed)
         assert 'Invalid' not in d.translate_link_layer(attr.link_layer)
         assert attr.max_msg_sz > 0x1000

         assert attr.max_msg_sz > 0x1000

...and the test run from that is:

# ./build/bin/run_tests.py --verbose tests.test_device.DeviceTest
test_dev_list (tests.test_device.DeviceTest) ... ok
test_open_dev (tests.test_device.DeviceTest) ... ok
test_query_device (tests.test_device.DeviceTest) ... ok
test_query_device_ex (tests.test_device.DeviceTest) ... ok
test_query_gid (tests.test_device.DeviceTest) ... ok
test_query_port (tests.test_device.DeviceTest) ... 
Diagnostics ===========================================
phys_state:     Link up (5)
active_width):  4X (2)
active_speed:   25.0 Gbps (32)
END of Diagnostics ====================================

Diagnostics ===========================================
phys_state:     Disabled (3)
active_width):  4X (2)
active_speed:   Invalid speed
END of Diagnostics ====================================
FAIL
test_query_port_bad_flow (tests.test_device.DeviceTest) ... ok

======================================================================
FAIL: test_query_port (tests.test_device.DeviceTest)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/kernel_work/rdma-core/tests/test_device.py", line 135, in test_query_port
    self.verify_port_attr(port_attr)
  File "/kernel_work/rdma-core/tests/test_device.py", line 119, in verify_port_attr
    assert 'Invalid' not in d.speed_to_str(attr.active_speed)
AssertionError

----------------------------------------------------------------------
Ran 7 tests in 0.055s

FAILED (failures=1)



thanks,
-- 
John Hubbard
NVIDIA




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux