Hi Ming,
The log you requested with the (arg4 & 512 != 0) predicate did not
match anything. However, I checked specifically for the offset of "76"
and came up with the following stack traces:
# /usr/share/bcc/tools/trace -K 'bio_add_page ((arg4 == 76)) "%d %d",
arg3, arg4 '
PID TID COMM FUNC -
7782 7782 kworker/19:1H bio_add_page 512 76
bio_add_page+0x1 [kernel]
sbc_execute_rw+0x28 [kernel]
__target_execute_cmd+0x2e [kernel]
target_execute_cmd+0x1c1 [kernel]
iscsit_execute_cmd+0x1e7 [kernel]
iscsit_sequence_cmd+0xdc [kernel]
isert_recv_done+0x780 [kernel]
__ib_process_cq+0x78 [kernel]
ib_cq_poll_work+0x29 [kernel]
process_one_work+0x179 [kernel]
worker_thread+0x4f [kernel]
kthread+0x105 [kernel]
ret_from_fork+0x1f [kernel]
14475 14475 kworker/13:1H bio_add_page 4096 76
bio_add_page+0x1 [kernel]
sbc_execute_rw+0x28 [kernel]
__target_execute_cmd+0x2e [kernel]
target_execute_cmd+0x1c1 [kernel]
iscsit_execute_cmd+0x1e7 [kernel]
iscsit_sequence_cmd+0xdc [kernel]
isert_recv_done+0x780 [kernel]
__ib_process_cq+0x78 [kernel]
ib_cq_poll_work+0x29 [kernel]
process_one_work+0x179 [kernel]
worker_thread+0x4f [kernel]
kthread+0x105 [kernel]
ret_from_fork+0x1f [kernel]
Thanks,
Steve
On Mon, Dec 2, 2019 at 7:59 PM Ming Lei <ming.lei@xxxxxxxxxx> wrote:
>
> On Mon, Dec 02, 2019 at 01:42:15PM -0500, Stephen Rust wrote:
> > Hi Ming,
> >
> > > I may get one machine with Mellanox NIC, is it easy to setup & reproduce
> > > just in the local machine(both host and target are setup on same machine)?
> >
> > Yes, I have reproduced locally on one machine (using the IP address of
> > the Mellanox NIC as the target IP), with iser enabled on the target,
> > and iscsiadm connected via iser.
> >
> > e.g.:
> > target:
> > /iscsi/iqn.20.../0.0.0.0:3260> enable_iser true
> > iSER enable now: True
> >
> > | | o- portals
> > ....................................................................................................
> > [Portals: 1]
> > | | o- 0.0.0.0:3260
> > ...................................................................................................
> > [iser]
> >
> > client:
> > # iscsiadm -m node -o update --targetname <target> -n
> > iface.transport_name -v iser
> > # iscsiadm -m node --targetname <target> --login
> > # iscsiadm -m session
> > iser: [3] 172.16.XX.XX:3260,1
> > iqn.2003-01.org.linux-iscsi.x8664:sn.c46c084919b0 (non-flash)
> >
> > > Please try to trace bio_add_page() a bit via 'bpftrace ./ilo.bt'.
> >
> > Here is the output of this trace from a failed run:
> >
> > # bpftrace lio.bt
> > modprobe: FATAL: Module kheaders not found.
> > Attaching 3 probes...
> > 512 76
> > 4096 0
> > 4096 0
> > 4096 0
> > 4096 76
>
> The above buffer might be the reason, 4096 is length, and 76 is the
> offset, that means the added buffer crosses two pages, meantime the
> buffer isn't aligned.
>
> We need to figure out why the magic 76 offset is passed from target or
> driver.
>
> Please install bcc and collect the following log:
>
> /usr/share/bcc/tools/trace -K 'bio_add_page ((arg4 & 512) != 0) "%d %d", arg3, arg4 '
>
>
> Thanks,
> Ming
>
