[Apologies for dup, re-sending without text formatting to lists] Hi, Thanks for your reply. I agree it does seem surprising that the git bisect pointed to this particular commit when tracking down this issue. > Stephen, could you share us how you setup the ramdisk in your test? The ramdisk we export in LIO is a standard "brd" module ramdisk (ie: /dev/ram*). We configure it as a "block" backstore in LIO, not using the built-in LIO ramdisk. LIO configuration is as follows: o- backstores .......................................................... [...] | o- block .............................................. [Storage Objects: 1] | | o- Blockbridge-952f0334-2535-5fae-9581-6c6524165067 [/dev/ram-bb.952f0334-2535-5fae-9581-6c6524165067.cm2 (16.0MiB) write-thru activated] | | o- alua ............................................... [ALUA Groups: 1] | | o- default_tg_pt_gp ................... [ALUA state: Active/optimized] | o- fileio ............................................. [Storage Objects: 0] | o- pscsi .............................................. [Storage Objects: 0] | o- ramdisk ............................................ [Storage Objects: 0] o- iscsi ........................................................ [Targets: 1] | o- iqn.2009-12.com.blockbridge:rda:1:952f0334-2535-5fae-9581-6c6524165067:rda [TPGs: 1] | o- tpg1 ...................................... [no-gen-acls, auth per-acl] | o- acls ...................................................... [ACLs: 1] | | o- iqn.1994-05.com.redhat:115ecc56a5c .. [mutual auth, Mapped LUNs: 1] | | o- mapped_lun0 [lun0 block/Blockbridge-952f0334-2535-5fae-9581-6c6524165067 (rw)] | o- luns ...................................................... [LUNs: 1] | | o- lun0 [block/Blockbridge-952f0334-2535-5fae-9581-6c6524165067 (/dev/ram-bb.952f0334-2535-5fae-9581-6c6524165067.cm2) (default_tg_pt_gp)] | o- portals ................................................ [Portals: 1] | o- 0.0.0.0:3260 ............................................... [iser] > > > Could you explain a bit what is iSCSI attached with iSER / RDMA? Is the > > > actual transport TCP over RDMA? What is related target driver involved? iSER is the iSCSI extension for RDMA, and it is important to note that we have _only_ reproduced this when the writes occur over RDMA, with the target portal in LIO having enabled "iser". The iscsi client (using iscsiadm) connects to the target directly over iSER. We use the Mellanox ConnectX-5 Ethernet NICs (mlx5* module) for this purpose, which utilizes RoCE (RDMA over Converged Ethernet) instead of TCP. The identical ramdisk configuration using TCP/IP target in LIO has _not_ reproduced this issue for us. > > > /usr/share/bcc/tools/stackcount -K rd_execute_rw I installed bcc and used the stackcount tool to trace rd_execute_rw, but I suspect because we are not using the built-in LIO ramdisk this did not catch anything. Are there other function traces we can provide for you? Thanks, Steve
