[PATCH AUTOSEL 4.19 37/38] nbd: handle racing with error'ed out commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Josef Bacik <josef@xxxxxxxxxxxxxx>

[ Upstream commit 7ce23e8e0a9cd38338fc8316ac5772666b565ca9 ]

We hit the following warning in production

print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
Workqueue: knbd-recv recv_work [nbd]
RIP: 0010:refcount_sub_and_test_checked+0x53/0x60
Call Trace:
 blk_mq_free_request+0xb7/0xf0
 blk_mq_complete_request+0x62/0xf0
 recv_work+0x29/0xa1 [nbd]
 process_one_work+0x1f5/0x3f0
 worker_thread+0x2d/0x3d0
 ? rescuer_thread+0x340/0x340
 kthread+0x111/0x130
 ? kthread_create_on_node+0x60/0x60
 ret_from_fork+0x1f/0x30
---[ end trace b079c3c67f98bb7c ]---

This was preceded by us timing out everything and shutting down the
sockets for the device.  The problem is we had a request in the queue at
the same time, so we completed the request twice.  This can actually
happen in a lot of cases, we fail to get a ref on our config, we only
have one connection and just error out the command, etc.

Fix this by checking cmd->status in nbd_read_stat.  We only change this
under the cmd->lock, so we are safe to check this here and see if we've
already error'ed this command out, which would indicate that we've
completed it as well.

Reviewed-by: Mike Christie <mchristi@xxxxxxxxxx>
Signed-off-by: Josef Bacik <josef@xxxxxxxxxxxxxx>

Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/block/nbd.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 46cd52d1d6537..dd67a3dff93b1 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -663,6 +663,12 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
 		ret = -ENOENT;
 		goto out;
 	}
+	if (cmd->status != BLK_STS_OK) {
+		dev_err(disk_to_dev(nbd->disk), "Command already handled %p\n",
+			req);
+		ret = -ENOENT;
+		goto out;
+	}
 	if (test_bit(NBD_CMD_REQUEUED, &cmd->flags)) {
 		dev_err(disk_to_dev(nbd->disk), "Raced with timeout on req %p\n",
 			req);
-- 
2.20.1




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux