Re: [PATCH] io_uring: avoid page allocation warnings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/30/19 11:03 AM, Mark Rutland wrote:
> On Tue, Apr 30, 2019 at 10:21:03AM -0600, Jens Axboe wrote:
>> On 4/30/19 8:59 AM, Mark Rutland wrote:
>>> On Tue, Apr 30, 2019 at 07:18:10AM -0700, Matthew Wilcox wrote:
>>>> On Tue, Apr 30, 2019 at 02:24:05PM +0100, Mark Rutland wrote:
>>>>> In io_sqe_buffer_register() we allocate a number of arrays based on the
>>>>> iov_len from the user-provided iov. While we limit iov_len to SZ_1G,
>>>>> we can still attempt to allocate arrays exceeding MAX_ORDER.
>>>>>
>>>>> On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and
>>>>> iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to
>>>>> allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320
>>>>> bytes, which is greater than 4MiB. This results in SLUB warning that
>>>>> we're trying to allocate greater than MAX_ORDER, and failing the
>>>>> allocation.
>>>>>
>>>>> Avoid this by passing __GFP_NOWARN when allocating arrays for the
>>>>> user-provided iov_len. We'll gracefully handle the failed allocation,
>>>>> returning -ENOMEM to userspace.
>>>>>
>>>>> We should probably consider lowering the limit below SZ_1G, or reworking
>>>>> the array allocations.
>>>>
>>>> I'd suggest that kvmalloc is probably our friend here ... we don't really
>>>> want to return -ENOMEM to userspace for this case, I don't think.
>>>
>>> Sure. I'll go verify that the uring code doesn't assume this memory is
>>> physically contiguous.
>>>
>>> I also guess we should be passing GFP_KERNEL_ACCOUNT rateh than a plain
>>> GFP_KERNEL.
>>
>> kvmalloc() is fine, the io_uring code doesn't care about the layout of
>> the memory, it just uses it as an index.
> 
> I've just had a go at that, but when using kvmalloc() with or without
> GFP_KERNEL_ACCOUNT I hit OOM and my system hangs within a few seconds with the
> syzkaller prog below:
> 
> ----
> Syzkaller reproducer:
> # {Threaded:false Collide:false Repeat:false RepeatTimes:0 Procs:1 Sandbox: Fault:false FaultCall:-1 FaultNth:0 EnableTun:false EnableNetDev:false EnableNetReset:false EnableCgroups:false EnableBinfmtMisc:false EnableCloseFds:false UseTmpDir:false HandleSegv:false Repro:false Trace:false}
> r0 = io_uring_setup(0x378, &(0x7f00000000c0))
> sendmsg$SEG6_CMD_SET_TUNSRC(0xffffffffffffffff, &(0x7f0000000240)={&(0x7f0000000000)={0x10, 0x0, 0x0, 0x40000000}, 0xc, 0x0, 0x1, 0x0, 0x0, 0x10}, 0x800)
> io_uring_register$IORING_REGISTER_BUFFERS(r0, 0x0, &(0x7f0000000000), 0x1)
> ----
> 
> ... I'm a bit worried that opens up a trivial DoS.
> 
> Thoughts?

Can you post the patch you used?

-- 
Jens Axboe




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux