Re: [PATCH V15 14/18] block: enable multipage bvecs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 21, 2019 at 11:08:19AM +0100, Marek Szyprowski wrote:
> Hi Ming,
> 
> On 2019-02-21 10:57, Ming Lei wrote:
> > On Thu, Feb 21, 2019 at 09:42:59AM +0100, Marek Szyprowski wrote:
> >> On 2019-02-15 12:13, Ming Lei wrote:
> >>> This patch pulls the trigger for multi-page bvecs.
> >>>
> >>> Reviewed-by: Omar Sandoval <osandov@xxxxxx>
> >>> Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
> >> Since Linux next-20190218 I've observed problems with block layer on one
> >> of my test devices (Odroid U3 with EXT4 rootfs on SD card). Bisecting
> >> this issue led me to this change. This is also the first linux-next
> >> release with this change merged. The issue is fully reproducible and can
> >> be observed in the following kernel log:
> >>
> >> sdhci: Secure Digital Host Controller Interface driver
> >> sdhci: Copyright(c) Pierre Ossman
> >> s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (100000000 Hz)
> >> s3c-sdhci 12530000.sdhci: Got CD GPIO
> >> mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA
> >> mmc0: new high speed SDHC card at address aaaa
> >> mmcblk0: mmc0:aaaa SL16G 14.8 GiB
> >>
> >> ...
> >>
> >> EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
> >> EXT4-fs (mmcblk0p2): write access will be enabled during recovery
> >> EXT4-fs (mmcblk0p2): recovery complete
> >> EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
> >> VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
> >> devtmpfs: mounted
> >> Freeing unused kernel memory: 1024K
> >> hub 1-3:1.0: USB hub found
> >> Run /sbin/init as init process
> >> hub 1-3:1.0: 3 ports detected
> >> *** stack smashing detected ***: <unknown> terminated
> >> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
> >> CPU: 1 PID: 1 Comm: init Not tainted 5.0.0-rc6-next-20190218 #1546
> >> Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> >> [<c01118d0>] (unwind_backtrace) from [<c010d794>] (show_stack+0x10/0x14)
> >> [<c010d794>] (show_stack) from [<c09ff8a4>] (dump_stack+0x90/0xc8)
> >> [<c09ff8a4>] (dump_stack) from [<c0125944>] (panic+0xfc/0x304)
> >> [<c0125944>] (panic) from [<c012bc98>] (do_exit+0xabc/0xc6c)
> >> [<c012bc98>] (do_exit) from [<c012c100>] (do_group_exit+0x3c/0xbc)
> >> [<c012c100>] (do_group_exit) from [<c0138908>] (get_signal+0x130/0xbf4)
> >> [<c0138908>] (get_signal) from [<c010c7a0>] (do_work_pending+0x130/0x618)
> >> [<c010c7a0>] (do_work_pending) from [<c0101034>]
> >> (slow_work_pending+0xc/0x20)
> >> Exception stack(0xe88c3fb0 to 0xe88c3ff8)
> >> 3fa0:                                     00000000 bea7787c 00000005
> >> b6e8d0b8
> >> 3fc0: bea77a18 b6f92010 b6e8d0b8 00000001 b6e8d0c8 00000001 b6e8c000
> >> bea77b60
> >> 3fe0: 00000020 bea77998 ffffffff b6d52368 60000050 ffffffff
> >> CPU3: stopping
> >>
> >> I would like to help debugging and fixing this issue, but I don't really
> >> have idea where to start. Here are some more detailed information about
> >> my test system:
> >>
> >> 1. Board: ARM 32bit Samsung Exynos4412-based Odroid U3 (device tree
> >> source: arch/arm/boot/dts/exynos4412-odroidu3.dts)
> >>
> >> 2. Block device: MMC/SDHCI/SDHCI-S3C with SD card
> >> (drivers/mmc/host/sdhci-s3c.c driver, sdhci_2 device node in the device
> >> tree)
> >>
> >> 3. Rootfs: Ext4
> >>
> >> 4. Kernel config: arch/arm/configs/exynos_defconfig
> >>
> >> I can gather more logs if needed, just let me which kernel option to
> >> enable. Reverting this commit on top of next-20190218 as well as current
> >> linux-next (tested with next-20190221) fixes this issue and makes the
> >> system bootable again.
> > Could you test the patch in following link and see if it can make a difference?
> >
> > https://marc.info/?l=linux-aio&m=155070355614541&w=2
> 
> I've tested that patch, but it doesn't make any difference on the test
> system. In the log I see no warning added by it.

I guess it might be related with memory corruption, could you enable the
following debug options and post the dmesg log?

CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_KASAN=y

Thanks,
Ming



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux