To allow running tests using a null_blk device with the zoned mode disabled (current setup) as well as enabled, introduce the config the RUN_ZONED_TESTS config variable and the per-test flag CAN_BE_ZONED. RUN_ZONED_TESTS=1 indicates that tests run against null_blk will be executed twice, first with null_blk as a regular block device (RUN_FOR_ZONED=0) and a second time with null_blk set as a zoned block device (RUN_FOR_ZONED=1). This applies only to tests cases that have the variable CAN_BE_ZONED set to 1, indicating that the test case applies to zoned block devices. If CAN_BE_ZONED is not defined by a test case, the test is executed only with the regular null_blk device. _init_null_blk is modified to prepare null_blk as a zoned blocked device if RUN_FOR_ZONED is set and as a regular block device otherwise. To avoid "modprobe -r null_blk" failures, rmdir calls on all sysfs nullbX directories is added. When a zoned block device is specified in TEST_DEVS, failures of test cases that do not set CAN_BE_ZONED are avoided by automatically skipping the test. The new helper function _test_dev_is_zoned() is introduced to implement this. The use of the RUN_ZONED_TESTS variable requires that the kernel be compiled with CONFIG_BLK_DEV_ZONED enabled. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@xxxxxxx> --- Documentation/running-tests.md | 13 +++++++++++++ check | 29 ++++++++++++++++++++++++++--- common/null_blk | 23 ++++++++++++++++++++++- common/shellcheck | 2 +- new | 4 ++++ 5 files changed, 66 insertions(+), 5 deletions(-) diff --git a/Documentation/running-tests.md b/Documentation/running-tests.md index 8f32af3..459c96b 100644 --- a/Documentation/running-tests.md +++ b/Documentation/running-tests.md @@ -82,6 +82,19 @@ passing the `-d` command line option or setting the `DEVICE_ONLY` variable. DEVICE_ONLY=1 ``` +### Zoned Block Device + +To run test cases for zoned block devices, set `RUN_ZONED_TESTS` variable. +When this variable is set and a test case can prepare a virtual devices such +as null_blk with zoned mode, the test case is executed twice: first with +non-zoned mode and second with zoned mode. The use of the RUN_ZONED_TESTS +variable requires that the kernel be compiled with CONFIG_BLK_DEV_ZONED +enabled. + +```sh +RUN_ZONED_TESTS=1 +``` + ### Custom Setup The `config` file is really just a bash file that is sourced at the beginning diff --git a/check b/check index 6c6d9f5..4563d62 100755 --- a/check +++ b/check @@ -17,7 +17,7 @@ _found_test() { local test_name="$1" local explicit="$2" - unset DESCRIPTION QUICK TIMED requires device_requires test test_device + unset DESCRIPTION QUICK TIMED CAN_BE_ZONED requires device_requires test test_device # shellcheck disable=SC1090 if ! . "tests/${test_name}"; then @@ -182,11 +182,14 @@ _write_test_run() { _output_status() { local test="$1" local status="$2" + local zoned=" " + + if (( RUN_FOR_ZONED )); then zoned=" (zoned) "; fi if [[ -v DESCRIPTION ]]; then - printf '%-60s' "$test ($DESCRIPTION)" + printf '%-60s' "${test}${zoned}($DESCRIPTION)" else - printf '%-60s' "$test" + printf '%-60s' "${test}${zoned}" fi if [[ -z $status ]]; then echo @@ -391,10 +394,19 @@ _call_test() { fi } +_test_dev_is_zoned() { + if grep -qe "none" "${TEST_DEV_SYSFS}/queue/zoned" ; then + SKIP_REASON="${TEST_DEV} is not a zoned block device" + return 1 + fi + return 0 +} + _run_test() { TEST_NAME="$1" CHECK_DMESG=1 DMESG_FILTER="cat" + RUN_FOR_ZONED=0 # shellcheck disable=SC1090 . "tests/${TEST_NAME}" @@ -407,6 +419,11 @@ _run_test() { RESULTS_DIR="$OUTPUT/nodev" _call_test test + if (( RUN_ZONED_TESTS && CAN_BE_ZONED )); then + RESULTS_DIR="$OUTPUT/nodev_zoned" + RUN_FOR_ZONED=1 + _call_test test + fi else if [[ ${#TEST_DEVS[@]} -eq 0 ]]; then return 0 @@ -420,6 +437,11 @@ _run_test() { local ret=0 for TEST_DEV in "${TEST_DEVS[@]}"; do TEST_DEV_SYSFS="${TEST_DEV_SYSFS_DIRS["$TEST_DEV"]}" + if (( !CAN_BE_ZONED )) && _test_dev_is_zoned; then + SKIP_REASON="${TEST_DEV} is a zoned block device" + _output_notrun "$TEST_NAME => $(basename "$TEST_DEV")" + continue + fi if declare -fF device_requires >/dev/null && ! device_requires; then _output_notrun "$TEST_NAME => $(basename "$TEST_DEV")" continue @@ -591,6 +613,7 @@ fi # Default configuration. : "${DEVICE_ONLY:=0}" : "${QUICK_RUN:=0}" +: "${RUN_ZONED_TESTS:=0}" : "${OUTPUT:=results}" if [[ -v EXCLUDE ]] && ! declare -p EXCLUDE | grep -q '^declare -a'; then # If EXCLUDE was not defined as an array, convert it to one. diff --git a/common/null_blk b/common/null_blk index 937ece0..fd035b7 100644 --- a/common/null_blk +++ b/common/null_blk @@ -8,8 +8,29 @@ _have_null_blk() { _have_modules null_blk } +_null_blk_not_zoned() { + if [[ "${ZONED}" != "0" ]]; then + # shellcheck disable=SC2034 + SKIP_REASON="null_blk zoned mode not supported" + return 1 + fi + return 0 +} + _init_null_blk() { - if ! modprobe -r null_blk || ! modprobe null_blk "$@"; then + for d in /sys/kernel/config/nullb/*; + do [[ -d "$d" ]] && rmdir "$d"; done + + local _zoned="" + if [[ ${RUN_FOR_ZONED} -ne 0 ]] ; then + if ! _have_kernel_option BLK_DEV_ZONED ; then + echo -n "ZONED specified for kernel with " + echo "CONFIG_BLK_DEV_ZONED disabled" + return 1 + fi + _zoned="zoned=1" + fi + if ! modprobe -r null_blk || ! modprobe null_blk "$@" "${_zoned}" ; then return 1 fi diff --git a/common/shellcheck b/common/shellcheck index 5f46c00..b9be7d2 100644 --- a/common/shellcheck +++ b/common/shellcheck @@ -6,5 +6,5 @@ # Suppress unused global variable warnings. _silence_sc2034() { - echo "$CGROUP2_DIR $CHECK_DMESG $DESCRIPTION $DMESG_FILTER $FIO_PERF_FIELDS $FIO_PERF_PREFIX $QUICK $SKIP_REASON ${TEST_RUN[*]} $TIMED" > /dev/null + echo "$CGROUP2_DIR $CHECK_DMESG $DESCRIPTION $DMESG_FILTER $FIO_PERF_FIELDS $FIO_PERF_PREFIX $QUICK $SKIP_REASON ${TEST_RUN[*]} $TIMED $CAN_BE_ZONED" > /dev/null } diff --git a/new b/new index 63e36cd..d7d5f7c 100755 --- a/new +++ b/new @@ -145,6 +145,10 @@ DESCRIPTION="" # Alternatively, you can filter out any unimportant messages in dmesg like so: # DMESG_FILTER="grep -v sysfs" +# TODO: if this test can be run for both regular block devices and zoned block +# devices, uncomment the line below. +# CAN_BE_ZONED=1 + # TODO: if this test has any extra requirements, it should define a requires() # function. If the test can be run, requires() should return 0. Otherwise, it # should return non-zero and set the \$SKIP_REASON variable. Usually, -- 2.20.1