RE: [PATCH 2/2] scsi: ufs: add inline crypto support to UFS HCD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ladvine,

>From: Ladvine D Almeida <ladvine.dalmeida@xxxxxxxxxxxx>
>Sent: Friday, December 14, 2018 1:10 AM
>Subject: Re: [PATCH 2/2] scsi: ufs: add inline crypto support to UFS HCD
>Where is Crypto target 'crypto-ufs' implementation available? Did you submitted
>any other patch for the same?
>Also, it is better to provide a generic name as the target is valid for all other block
>devices.

[PATCH 2/2] have crypto-ufs implementation. [PATCH 1/2] add variable to struct bio.
Device mapper name is not generic because there are ufs specific things but we should
be able to make it generic.

Regards,
Parshuram Thombare

>-----Original Message-----
>From: Ladvine D Almeida <ladvine.dalmeida@xxxxxxxxxxxx>
>Sent: Friday, December 14, 2018 1:10 AM
>To: Parshuram Raju Thombare <pthombar@xxxxxxxxxxx>; Eric Biggers
><ebiggers@xxxxxxxxxx>
>Cc: axboe@xxxxxxxxx; vinholikatti@xxxxxxxxx; jejb@xxxxxxxxxxxxxxxxxx;
>martin.petersen@xxxxxxxxxx; mchehab+samsung@xxxxxxxxxx;
>gregkh@xxxxxxxxxxxxxxxxxxx; davem@xxxxxxxxxxxxx; akpm@linux-
>foundation.org; nicolas.ferre@xxxxxxxxxxxxx; arnd@xxxxxxxx; linux-
>kernel@xxxxxxxxxxxxxxx; linux-block@xxxxxxxxxxxxxxx; linux-
>scsi@xxxxxxxxxxxxxxx; Alan Douglas <adouglas@xxxxxxxxxxx>; Janek Kotas
><jank@xxxxxxxxxxx>; Rafal Ciepiela <rafalc@xxxxxxxxxxx>; AnilKumar
>Chimata <anilc@xxxxxxxxxxxxxx>; Ladvine D Almeida
><ladvine.dalmeida@xxxxxxxxxxxx>; Satya Tangirala <satyat@xxxxxxxxxx>; Paul
>Crowley <paulcrowley@xxxxxxxxxx>; Manjunath M Bettegowda
><manjunath.mb@xxxxxxxxxxxx>; Tejas Joglekar
><tejas.joglekar@xxxxxxxxxxxx>; Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>; linux-
>crypto@xxxxxxxxxxxxxxx
>Subject: Re: [PATCH 2/2] scsi: ufs: add inline crypto support to UFS HCD
>
>EXTERNAL MAIL
>
>
>On 12/12/18 5:52 AM, Parshuram Raju Thombare wrote:
>> Hello Eric,
>>
>> Thank you for a comment.
>>
>>> -----Original Message-----
>>> From: Eric Biggers <ebiggers@xxxxxxxxxx>
>>> Sent: Tuesday, December 11, 2018 11:47 PM
>>> To: Parshuram Raju Thombare <pthombar@xxxxxxxxxxx>
>>> Cc: axboe@xxxxxxxxx; vinholikatti@xxxxxxxxx; jejb@xxxxxxxxxxxxxxxxxx;
>>> martin.petersen@xxxxxxxxxx; mchehab+samsung@xxxxxxxxxx;
>>> gregkh@xxxxxxxxxxxxxxxxxxx; davem@xxxxxxxxxxxxx; akpm@linux-
>>> foundation.org; nicolas.ferre@xxxxxxxxxxxxx; arnd@xxxxxxxx; linux-
>>> kernel@xxxxxxxxxxxxxxx; linux-block@xxxxxxxxxxxxxxx; linux-
>>> scsi@xxxxxxxxxxxxxxx; Alan Douglas <adouglas@xxxxxxxxxxx>; Janek
>>> Kotas <jank@xxxxxxxxxxx>; Rafal Ciepiela <rafalc@xxxxxxxxxxx>;
>>> AnilKumar Chimata <anilc@xxxxxxxxxxxxxx>; Ladvine D Almeida
>>> <ladvine@xxxxxxxxxxxx>; Satya Tangirala <satyat@xxxxxxxxxx>; Paul
>>> Crowley <paulcrowley@xxxxxxxxxx>
>>> Subject: Re: [PATCH 2/2] scsi: ufs: add inline crypto support to UFS
>>> HCD
>>>
>>> EXTERNAL MAIL
>>>
>>>
>>> [+Cc other people who have been working on this]
>Eric, Thanks for cc-ing me to the mail chain.
>
>Parshuram,
>Glad to know that you are working on the Inline Encryption support.
>My concerns are mentioned inline below.
>
>>>
>>>
>>>
>>> Hi Parshuram,
>>>
>>>
>>>
>>> On Tue, Dec 11, 2018 at 09:50:27AM +0000, Parshuram Thombare wrote:
>>>
>>>> Add real time crypto support to UFS HCD using new device
>>>
>>>> mapper 'crypto-ufs'. dmsetup tool can be used to enable
>>>
>>>> real time / inline crypto support using device mapper
>>>
>>>> 'crypt-ufs'.
>
>Where is Crypto target 'crypto-ufs' implementation available? Did you submitted
>any other patch for the same?
>Also, it is better to provide a generic name as the target is valid for all other block
>devices.
>
>>>
>>>>
>>>
>>>> Signed-off-by: Parshuram Thombare <pthombar@xxxxxxxxxxx>
>>>
>>>> ---
>>>
>>>>  MAINTAINERS                      |    7 +
>>>
>>>>  block/Kconfig                    |    5 +
>>>
>>>>  drivers/scsi/ufs/Kconfig         |   12 +
>>>
>>>>  drivers/scsi/ufs/Makefile        |    1 +
>>>
>>>>  drivers/scsi/ufs/ufshcd-crypto.c |  453
>>> ++++++++++++++++++++++++++++++++++++++
>>>
>>>>  drivers/scsi/ufs/ufshcd-crypto.h |  102 +++++++++
>>>
>>>>  drivers/scsi/ufs/ufshcd.c        |   27 +++-
>>>
>>>>  drivers/scsi/ufs/ufshcd.h        |    6 +
>>>
>>>>  drivers/scsi/ufs/ufshci.h        |    1 +
>>>
>>>>  9 files changed, 613 insertions(+), 1 deletions(-)
>>>
>>>>  create mode 100644 drivers/scsi/ufs/ufshcd-crypto.c
>>>
>>>>  create mode 100644 drivers/scsi/ufs/ufshcd-crypto.h
>>>
>>>>
>>>
>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>
>>>> index f485597..3a68126 100644
>>>
>>>> --- a/MAINTAINERS
>>>
>>>> +++ b/MAINTAINERS
>>>
>>>> @@ -15340,6 +15340,13 @@ S:	Supported
>>>
>>>>  F:	Documentation/scsi/ufs.txt
>>>
>>>>  F:	drivers/scsi/ufs/
>>>
>>>>
>>>
>>>> +UNIVERSAL FLASH STORAGE HOST CONTROLLER CRYPTO DRIVER
>>>
>>>> +M:	Parshuram Thombare <pthombar@xxxxxxxxxxx>
>>>
>>>> +L:	linux-scsi@xxxxxxxxxxxxxxx
>>>
>>>> +S:	Supported
>>>
>>>> +F:	drivers/scsi/ufs/ufshcd-crypto.c
>>>
>>>> +F:	drivers/scsi/ufs/ufshcd-crypto.h
>>>
>>>> +
>>>
>>>>  UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
>>>
>>>>  M:	Joao Pinto <jpinto@xxxxxxxxxxxx>
>>>
>>>>  L:	linux-scsi@xxxxxxxxxxxxxxx
>>>
>>>> diff --git a/block/Kconfig b/block/Kconfig
>>>
>>>> index f7045aa..6afe131 100644
>>>
>>>> --- a/block/Kconfig
>>>
>>>> +++ b/block/Kconfig
>>>
>>>> @@ -224,4 +224,9 @@ config BLK_MQ_RDMA
>>>
>>>>  config BLK_PM
>>>
>>>>  	def_bool BLOCK && PM
>>>
>>>>
>>>
>>>> +config BLK_DEV_HW_RT_ENCRYPTION
>>>
>>>> +	bool
>>>
>>>> +	depends on SCSI_UFSHCD_RT_ENCRYPTION
>>>
>>>> +	default n
>>>
>>>> +
>>>
>>>>  source block/Kconfig.iosched
>>>
>>>> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
>>>
>>>> index 2ddbb26..09a3ec0 100644
>>>
>>>> --- a/drivers/scsi/ufs/Kconfig
>>>
>>>> +++ b/drivers/scsi/ufs/Kconfig
>>>
>>>> @@ -136,3 +136,15 @@ config SCSI_UFS_BSG
>>>
>>>>
>>>
>>>>  	  Select this if you need a bsg device node for your UFS controller.
>>>
>>>>  	  If unsure, say N.
>>>
>>>> +
>>>
>>>> +config SCSI_UFSHCD_RT_ENCRYPTION
>>>
>>>> +	bool "Universal Flash Storage Controller RT encryption support"
>>>
>>>> +	depends on SCSI_UFSHCD
>>>
>>>> +	default n
>>>
>>>> +	select BLK_DEV_HW_RT_ENCRYPTION if SCSI_UFSHCD_RT_ENCRYPTION
>>>
>>>> +	select BLK_DEV_DM if SCSI_UFSHCD_RT_ENCRYPTION
>>>
>>>> +	help
>>>
>>>> +	Universal Flash Storage Controller RT encryption support
>>>
>>>> +
>>>
>>>> +	Select this if you want to enable real time encryption on UFS
>>>> +controller
>>>
>>>> +	If unsure, say N.
>>>
>>>> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
>>>
>>>> index a3bd70c..6169096 100644
>>>
>>>> --- a/drivers/scsi/ufs/Makefile
>>>
>>>> +++ b/drivers/scsi/ufs/Makefile
>>>
>>>> @@ -7,6 +7,7 @@ obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
>>>
>>>>  obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
>>>
>>>>  ufshcd-core-y				+= ufshcd.o ufs-sysfs.o
>>>
>>>>  ufshcd-core-$(CONFIG_SCSI_UFS_BSG)	+= ufs_bsg.o
>>>
>>>> +ufshcd-core-$(CONFIG_SCSI_UFSHCD_RT_ENCRYPTION) += ufshcd-crypto.o
>>>
>>>>  obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
>>>
>>>>  obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
>>>
>>>>  obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
>>>
>>>> diff --git a/drivers/scsi/ufs/ufshcd-crypto.c
>>>> b/drivers/scsi/ufs/ufshcd-crypto.c
>>>
>>>> new file mode 100644
>>>
>>>> index 0000000..9c95ff3
>>>
>>>> --- /dev/null
>>>
>>>> +++ b/drivers/scsi/ufs/ufshcd-crypto.c
>>>
>>>> @@ -0,0 +1,453 @@
>>>
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>
>>>> +/*
>>>
>>>> + * UFS Host controller crypto driver
>>>
>>>> + *
>>>
>>>> + * Copyright (C) 2018 Cadence Design Systems, Inc.
>>>
>>>> + *
>>>
>>>> + * Authors:
>>>
>>>> + *	Parshuram Thombare <pthombar@xxxxxxxxxxx>
>>>
>>>> + *
>>>
>>>> + */
>>>
>>>> +
>>>
>>>> +#include <linux/module.h>
>>>
>>>> +#include <linux/kernel.h>
>>>
>>>> +#include <crypto/aes.h>
>>>
>>>> +#include <linux/device-mapper.h>
>>>
>>>> +#include "ufshcd.h"
>>>
>>>> +#include "ufshcd-crypto.h"
>>>
>>>> +#include "scsi/scsi_device.h"
>>>
>>>> +#include "scsi/scsi_host.h"
>>>
>>>> +
>>>
>>>> +struct ufshcd_dm_ctx {
>>>
>>>> +	struct dm_dev *dev;
>>>
>>>> +	sector_t start;
>>>
>>>> +	unsigned short int sector_size;
>>>
>>>> +	unsigned char sector_shift;
>>>
>>>> +	int cci;
>>>
>>>> +	int cap_idx;
>>>
>>>> +	char key[AES_MAX_KEY_SIZE];
>>>
>>>> +	struct ufs_hba *hba;
>>>
>>>> +};
>>>
>>>> +
>>>
>>>> +static int dm_registered;
>>>
>>>> +
>>>
>>>> +static inline int
>>>
>>>> +ufshcd_key_id_to_len(int key_id)
>>>
>>>> +{
>>>
>>>> +	int key_len = -1;
>>>
>>>> +
>>>
>>>> +	switch (key_id) {
>>>
>>>> +	case UFS_CRYPTO_KEY_ID_128BITS:
>>>
>>>> +		key_len = AES_KEYSIZE_128;
>>>
>>>> +		break;
>>>
>>>> +	case UFS_CRYPTO_KEY_ID_192BITS:
>>>
>>>> +		key_len = AES_KEYSIZE_192;
>>>
>>>> +		break;
>>>
>>>> +	case UFS_CRYPTO_KEY_ID_256BITS:
>>>
>>>> +		key_len = AES_KEYSIZE_256;
>>>
>>>> +		break;
>>>
>>>> +	default:
>>>
>>>> +		break;
>>>
>>>> +	}
>>>
>>>> +	return key_len;
>>>
>>>> +}
>
>Why not -EINVAL for invalid key length?
>
>>>
>>>> +
>>>
>>>> +static inline int
>>>
>>>> +ufshcd_key_len_to_id(int key_len)
>>>
>>>> +{
>>>
>>>> +	int key_id = -1;
>>>
>>>> +
>>>
>>>> +	switch (key_len) {
>>>
>>>> +	case AES_KEYSIZE_128:
>>>
>>>> +		key_id = UFS_CRYPTO_KEY_ID_128BITS;
>>>
>>>> +		break;
>>>
>>>> +	case AES_KEYSIZE_192:
>>>
>>>> +		key_id = UFS_CRYPTO_KEY_ID_192BITS;
>>>
>>>> +		break;
>>>
>>>> +	case AES_KEYSIZE_256:
>>>
>>>> +		key_id = UFS_CRYPTO_KEY_ID_256BITS;
>>>
>>>> +		break;
>>>
>>>> +	default:
>>>
>>>> +		break;
>>>
>>>> +	}
>>>
>>>> +	return key_id;
>>>
>>>> +}
>>>
>>>> +
>>>
>>>> +static void
>>>
>>>> +ufshcd_read_crypto_capabilities(struct ufs_hba *hba)
>>>
>>>> +{
>>>
>>>> +	u32 tmp, i;
>>>
>>>> +	struct ufshcd_crypto_ctx *cctx = hba->cctx;
>>>
>>>> +
>>>
>>>> +	for (i = 0; i < cctx->cap_cnt; i++) {
>>>
>>>> +		tmp = ufshcd_readl(hba, REG_UFS_CRYPTOCAP + i);
>>>
>>>> +		cctx->ccaps[i].key_id = (tmp & CRYPTO_CAPS_KS_MASK) >>
>>>
>>>> +						CRYPTO_CAPS_KS_SHIFT;
>>>
>>>> +		cctx->ccaps[i].sdusb = (tmp & CRYPTO_CAPS_SDUSB_MASK) >>
>>>
>>>> +						CRYPTO_CAPS_SDUSB_SHIFT;
>>>
>>>> +		cctx->ccaps[i].alg_id = (tmp & CRYPTO_CAPS_ALG_ID_MASK) >>
>>>
>>>> +						CRYPTO_CAPS_ALG_ID_SHIFT;
>>>
>>>> +	}
>>>
>>>> +}
>>>
>>>> +
>>>
>>>> +static inline int
>>>
>>>> +ufshcd_get_cap_idx(struct ufshcd_crypto_ctx *cctx, int alg_id,
>>>
>>>> +	int key_id)
>>>
>>>> +{
>>>
>>>> +	int cap_idx;
>>>
>>>> +
>>>
>>>> +	for (cap_idx = 0; cap_idx < cctx->cap_cnt; cap_idx++) {
>>>
>>>> +		if (((cctx->ccaps[cap_idx].alg_id == alg_id) &&
>>>
>>>> +			cctx->ccaps[cap_idx].key_id == key_id))
>>>
>>>> +			break;
>>>
>>>> +	}
>>>
>>>> +	return ((cap_idx < cctx->cap_cnt) ? cap_idx : -1);
>>>
>>>> +}
>>>
>>>> +
>>>
>>>> +static inline int
>>>
>>>> +ufshcd_get_cci_slot(struct ufshcd_crypto_ctx *cctx)
>>>
>>>> +{
>>>
>>>> +	int  cci;
>>>
>>>> +
>>>
>>>> +	for (cci = 0; cci < cctx->config_cnt; cci++) {
>>>
>>>> +		if (!cctx->cconfigs[cci].cfge) {
>>>
>>>> +			cctx->cconfigs[cci].cfge = 1;
>>>
>>>> +			break;
>>>
>>>> +		}
>>>
>>>> +	}
>>>
>>>> +	return ((cci < cctx->config_cnt) ? cci : -1);
>>>
>>>> +}
>>>
>>>> +
>>>
>>>> +static void
>>>
>>>> +ufshcd_aes_ecb_set_key(struct ufshcd_dm_ctx *ctx)
>>>
>>>> +{
>>>
>>>> +	int i, key_size;
>>>
>>>> +	u32 val, cconfig16, crypto_config_addr;
>>>
>>>> +	struct ufshcd_crypto_ctx *cctx;
>>>
>>>> +	struct ufshcd_crypto_config *cconfig;
>>>
>>>> +	struct ufshcd_crypto_cap ccap;
>>>
>>>> +
>>>
>>>> +	cctx = ctx->hba->cctx;
>>>
>>>> +	if (ctx->cci <= 0)
>>>
>>>> +		ctx->cci = ufshcd_get_cci_slot(cctx);
>>>
>>>> +	/* If no slot is available, slot 0 is shared */
>>>
>>>> +	ctx->cci = ctx->cci < 0 ? 0 : ctx->cci;
>>>
>>>> +	cconfig = &(cctx->cconfigs[ctx->cci]);
>>>
>>>> +	ccap = cctx->ccaps[ctx->cap_idx];
>>>
>>>> +	key_size = ufshcd_key_id_to_len(ccap.key_id);
>>>
>>>> +
>>>
>>>> +	if ((cconfig->cap_idx != ctx->cap_idx) ||
>>>
>>>> +		((key_size > 0) &&
>>>
>>>> +		memcmp(cconfig->key, ctx->key, key_size))) {
>>>
>>>> +		cconfig->cap_idx = ctx->cap_idx;
>>>
>>>> +		memcpy(cconfig->key, ctx->key, key_size);
>>>
>>>> +		crypto_config_addr = cctx->crypto_config_base_addr +
>>>
>>>> +				ctx->cci * CRYPTO_CONFIG_SIZE;
>>>
>>>> +		cconfig16 = ccap.sdusb | (1 <<
>>> CRYPTO_CCONFIG16_CFGE_SHIFT);
>>>
>>>> +		cconfig16 |= ((ctx->cap_idx <<
>>> CRYPTO_CCONFIG16_CAP_IDX_SHIFT) &
>>>
>>>> +				CRYPTO_CCONFIG16_CAP_IDX_MASK);
>>>
>>>> +		spin_lock(&cctx->crypto_lock);
>>>
>>>> +		for (i = 0; i < key_size; i += 4) {
>>>
>>>> +			val = (ctx->key[i] | (ctx->key[i + 1] << 8) |
>>>
>>>> +				(ctx->key[i + 2] << 16) |
>>>
>>>> +				(ctx->key[i + 3] << 24));
>>>
>>>> +			ufshcd_writel(ctx->hba, val, crypto_config_addr + i);
>>>
>>>> +		}
>>>
>>>> +		ufshcd_writel(ctx->hba, cpu_to_le32(cconfig16),
>>>
>>>> +				crypto_config_addr + (4 * 16));
>>>
>>>> +		spin_unlock(&cctx->crypto_lock);
>>>
>>>> +		/* Make sure keys are programmed */
>>>
>>>> +		mb();
>>>
>>>> +	}
>>>
>>>> +}
>>>
>>>
>>>
>>> First of all, thanks for working on this.  A lot of Android device
>>> vendors would
>>>
>>> like to have upstream support for inline encryption.  However, are
>>> you aware of
>>>
>>> previous (unsuccessful) patchsets by other people working on this?
>>> Have you
>>>
>>> addressed the concerns and improved on their work, or is this just
>>> yet another
>>>
>>> new effort starting from scratch?
>>>
>>>
>>>
>>> AnilKumar Chimata <anilc@xxxxxxxxxxxxxx> (Qualcomm) in October 2018:
>>>
>>>
>>>
>>> 	https://urldefense.proofpoint.com/v2/url?u=https-
>>>
>3A__patchwork.kernel.org_cover_10645739_&d=DwIBAg&c=aUq983L2pue2FqKF
>>> oP6PGHMJQyoJ7kl3s3GZ-_haXqY&r=GTefrem3hiBCnsjCOqAuapQHRN8-
>>> rKC1FRbk0it-
>>>
>LDs&m=L9VLjsZ31dZ4TP4LdveuvcjPFzdZWGlZaZnzqGZH3zc&s=ZzYaAaVic5TB4RUS
>>> cR5kzcM_8gvLYdlNAzuY80_ASzI&e=
>>>
>>>
>>>
>>> Ladvine D Almeida <ladvine@xxxxxxxxxxxx> in May 2018:
>>>
>>>
>>>
>>> 	https://urldefense.proofpoint.com/v2/url?u=http-3A__lists-
>>> 2Darchives.com_linux-2Dkernel_29135393-2Dscsi-2Dufs-2Dufs-2Dhost-
>>> 2Dcontroller-2Dcrypto-
>>> 2Dchanges.html&d=DwIBAg&c=aUq983L2pue2FqKFoP6PGHMJQyoJ7kl3s3GZ-
>>> _haXqY&r=GTefrem3hiBCnsjCOqAuapQHRN8-rKC1FRbk0it-
>>>
>LDs&m=L9VLjsZ31dZ4TP4LdveuvcjPFzdZWGlZaZnzqGZH3zc&s=3pxSBZrt_DpDSz-
>>> ZXrM7_bj0QXmRzcbasPl_wB259Us&e=
>>>
>>>
>>>
>>> Satya Tangirala <satyat@xxxxxxxxxx> is also working on it but I don't
>>> believe
>>>
>>> he's sent out a patchset yet.
>>>
>>>
>>>
>>> It would be nice to coordinate to get a proper solution upstream that
>>> works for
>>>
>>> everyone, rather than having everyone try independently and fail
>>> repeatedly :-)
>> I had look at Ladvine's submission and think the approach of using
>> Linux crypto API and adding algorithm which is supposed to work inline
>> (and with UFS devices only) in global pool of algorithms (which is
>> supposed to be generic) makes it risky, if selected/used for other
>> type of device not supporting inline encryption. Also apparently it is not possible
>to support multiple UFS controllers in the system with that approach.
>> There was suggestion from Milan to use separate device mapper which
>> seems cleaner way of enabling inline encryption. Hence new device mapper is
>used.
>> I think this is better idea to coordinate and come up with a generic solution.
>
>Suggest to take a look into the article
>https://urldefense.proofpoint.com/v2/url?u=https-
>3A__lwn.net_Articles_717754&d=DwIFAg&c=aUq983L2pue2FqKFoP6PGHMJQyoJ
>7kl3s3GZ-_haXqY&r=GTefrem3hiBCnsjCOqAuapQHRN8-rKC1FRbk0it-
>LDs&m=rOQpiy7-
>jae72qATLWxXtCnoEXCjZLklWrHo5NtcUqo&s=xVHqE7JfiKf0rCQozZrYr6eeFn5D6U
>OCvXJMP-mjYX8&e=
>My real concern is how to achieve it without any modifications to the
>bio.(because key slot information has to finally reach the target block
>device)
>
>>>
>>>
>>>
>>> Also, note that ECB mode is not appropriate for disk encryption.  So
>>> this patch
>>>
>>> (and the hardware you tested it on, if that's all it supports) is
>>> effectively
>>>
>>> useless as-is.  You need to support XTS mode.
>> For now only AES-ECB is supported, we are working on adding other modes.
>>>
>>>
>>>
>>> Thanks!
>>>
>>>
>>>
>>> - Eric
>>
>> Regards,
>> Parshuram Thombare
>>
>
>Thanks,
>Ladvine





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux