Re: [PATCH v8 13/13] nvmet: Optionally use PCI P2P memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 09/27/2018 09:54 AM, Logan Gunthorpe wrote:
We create a configfs attribute in each nvme-fabrics target port to
enable p2p memory use. When enabled, the port will only then use the
p2p memory if a p2p memory device can be found which is behind the
same switch hierarchy as the RDMA port and all the block devices in
use. If the user enabled it and no devices are found, then the system
will silently fall back on using regular memory.

If appropriate, that port will allocate memory for the RDMA buffers
for queues from the p2pmem device falling back to system memory should
anything fail.

Ideally, we'd want to use an NVME CMB buffer as p2p memory. This would
save an extra PCI transfer as the NVME card could just take the data
out of it's own memory. However, at this time, only a limited number
of cards with CMB buffers seem to be available.

Signed-off-by: Stephen Bates <sbates@xxxxxxxxxxxx>
Signed-off-by: Steve Wise <swise@xxxxxxxxxxxxxxxxxxxxx>
[hch: partial rewrite of the initial code]
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Logan Gunthorpe <logang@xxxxxxxxxxxx>
---
  drivers/nvme/target/configfs.c    |  36 ++++++++
  drivers/nvme/target/core.c        | 138 +++++++++++++++++++++++++++++-
  drivers/nvme/target/io-cmd-bdev.c |   3 +
  drivers/nvme/target/nvmet.h       |  13 +++
  drivers/nvme/target/rdma.c        |   2 +
  5 files changed, 191 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index b37a8e3e3f80..0dfb0e0c3d21 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -17,6 +17,8 @@
  #include <linux/slab.h>
  #include <linux/stat.h>
  #include <linux/ctype.h>
+#include <linux/pci.h>
+#include <linux/pci-p2pdma.h>
#include "nvmet.h" @@ -1094,6 +1096,37 @@ static void nvmet_port_release(struct config_item *item)
  	kfree(port);
  }
+#ifdef CONFIG_PCI_P2PDMA
+static ssize_t nvmet_p2pmem_show(struct config_item *item, char *page)
+{
+	struct nvmet_port *port = to_nvmet_port(item);
+
+	return pci_p2pdma_enable_show(page, port->p2p_dev, port->use_p2pmem);
+}
+
+static ssize_t nvmet_p2pmem_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	struct nvmet_port *port = to_nvmet_port(item);
+	struct pci_dev *p2p_dev = NULL;
+	bool use_p2pmem;
+	int error;
+
+	error = pci_p2pdma_enable_store(page, &p2p_dev, &use_p2pmem);
+	if (error)
+		return error;
+
+	down_write(&nvmet_config_sem);
+	port->use_p2pmem = use_p2pmem;
+	pci_dev_put(port->p2p_dev);
+	port->p2p_dev = p2p_dev;
+	up_write(&nvmet_config_sem);
+
+	return count;
+}
+CONFIGFS_ATTR(nvmet_, p2pmem);
+#endif /* CONFIG_PCI_P2PDMA */
+
  static struct configfs_attribute *nvmet_port_attrs[] = {
  	&nvmet_attr_addr_adrfam,
  	&nvmet_attr_addr_treq,
@@ -1101,6 +1134,9 @@ static struct configfs_attribute *nvmet_port_attrs[] = {
  	&nvmet_attr_addr_trsvcid,
  	&nvmet_attr_addr_trtype,
  	&nvmet_attr_param_inline_data_size,
+#ifdef CONFIG_PCI_P2PDMA
+	&nvmet_attr_p2pmem,
+#endif
  	NULL,
  };
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index bddd1599b826..7ade16cb4ed3 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -15,6 +15,7 @@
  #include <linux/module.h>
  #include <linux/random.h>
  #include <linux/rculist.h>
+#include <linux/pci-p2pdma.h>
#include "nvmet.h" @@ -365,9 +366,29 @@ static void nvmet_ns_dev_disable(struct nvmet_ns *ns)
  	nvmet_file_ns_disable(ns);
  }
+static int nvmet_p2pdma_add_client(struct nvmet_ctrl *ctrl,
+		struct nvmet_ns *ns)
+{
+	int ret;
+
+	if (!blk_queue_pci_p2pdma(ns->bdev->bd_queue)) {
+		pr_err("peer-to-peer DMA is not supported by %s\n",
+		       ns->device_path);
+		return -EINVAL;
+	}
+
+	ret = pci_p2pdma_add_client(&ctrl->p2p_clients, nvmet_ns_dev(ns));
+	if (ret)
+		pr_err("failed to add peer-to-peer DMA client %s: %d\n",
+		       ns->device_path, ret);
+
+	return ret;
+}
+
  int nvmet_ns_enable(struct nvmet_ns *ns)
  {
  	struct nvmet_subsys *subsys = ns->subsys;
+	struct nvmet_ctrl *ctrl;
  	int ret;
mutex_lock(&subsys->lock);
@@ -389,6 +410,14 @@ int nvmet_ns_enable(struct nvmet_ns *ns)
  	if (ret)
  		goto out_dev_put;
+ list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry) {
+		if (ctrl->p2p_dev) {
+			ret = nvmet_p2pdma_add_client(ctrl, ns);
+			if (ret)
+				goto out_remove_clients;
+		}
+	}
+
  	if (ns->nsid > subsys->max_nsid)
  		subsys->max_nsid = ns->nsid;
@@ -417,6 +446,9 @@ int nvmet_ns_enable(struct nvmet_ns *ns)
  out_unlock:
  	mutex_unlock(&subsys->lock);
  	return ret;
+out_remove_clients:
+	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry)
+		pci_p2pdma_remove_client(&ctrl->p2p_clients, nvmet_ns_dev(ns));
  out_dev_put:
  	nvmet_ns_dev_disable(ns);
  	goto out_unlock;
@@ -425,6 +457,7 @@ int nvmet_ns_enable(struct nvmet_ns *ns)
  void nvmet_ns_disable(struct nvmet_ns *ns)
  {
  	struct nvmet_subsys *subsys = ns->subsys;
+	struct nvmet_ctrl *ctrl;
mutex_lock(&subsys->lock);
  	if (!ns->enabled)
@@ -450,6 +483,12 @@ void nvmet_ns_disable(struct nvmet_ns *ns)
  	percpu_ref_exit(&ns->ref);
mutex_lock(&subsys->lock);
+
+	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry) {
+		pci_p2pdma_remove_client(&ctrl->p2p_clients, nvmet_ns_dev(ns));
+		nvmet_add_async_event(ctrl, NVME_AER_TYPE_NOTICE, 0, 0);

Hi Logan, what is this event here?

+	}
+
  	subsys->nr_namespaces--;
  	nvmet_ns_changed(subsys, ns->nsid);
  	nvmet_ns_dev_disable(ns);
@@ -727,6 +766,23 @@ EXPORT_SYMBOL_GPL(nvmet_req_execute);
int nvmet_req_alloc_sgl(struct nvmet_req *req, struct nvmet_sq *sq)
  {
+	struct pci_dev *p2p_dev = NULL;
+
+	if (IS_ENABLED(CONFIG_PCI_P2PDMA)) {
+		if (sq->ctrl)
+			p2p_dev = sq->ctrl->p2p_dev;
+
+		req->p2p_dev = NULL;
+		if (sq->qid && p2p_dev) {
+			req->sg = pci_p2pmem_alloc_sgl(p2p_dev, &req->sg_cnt,
+						       req->transfer_len);
+			if (req->sg) {
+				req->p2p_dev = p2p_dev;
+				return 0;
+			}

Would be useful to comment that we fall to normal sgl allocation.

+		}
+	}
+
  	req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
  	if (!req->sg)
  		return -ENOMEM;
@@ -737,7 +793,11 @@ EXPORT_SYMBOL_GPL(nvmet_req_alloc_sgl);
void nvmet_req_free_sgl(struct nvmet_req *req)
  {
-	sgl_free(req->sg);
+	if (req->p2p_dev)
+		pci_p2pmem_free_sgl(req->p2p_dev, req->sg);
+	else
+		sgl_free(req->sg);
+
  	req->sg = NULL;
  	req->sg_cnt = 0;
  }
@@ -939,6 +999,79 @@ bool nvmet_host_allowed(struct nvmet_req *req, struct nvmet_subsys *subsys,
  		return __nvmet_host_allowed(subsys, hostnqn);
  }
+/*
+ * If allow_p2pmem is set, we will try to use P2P memory for the SGL lists for
+ * Ι/O commands. This requires the PCI p2p device to be compatible with the
+ * backing device for every namespace on this controller.
+ */
+static void nvmet_setup_p2pmem(struct nvmet_ctrl *ctrl, struct nvmet_req *req)
+{
+	struct nvmet_ns *ns;
+	int ret;
+
+	if (!req->port->use_p2pmem || !req->p2p_client)
+		return;

Nit, IMO would be better to check at the call-site, but not a hard
must...

I still do not fully understand why p2p_dev has to be ctrl-wide and not
per namespace. Sorry to keep bringing this up (again). But if people are
OK with it then I guess I can stop asking about this...


+
+	mutex_lock(&ctrl->subsys->lock);
+
+	ret = pci_p2pdma_add_client(&ctrl->p2p_clients, req->p2p_client);
+	if (ret) {
+		pr_err("failed adding peer-to-peer DMA client %s: %d\n",
+		       dev_name(req->p2p_client), ret);
+		goto free_devices;
+	}
+
+	list_for_each_entry_rcu(ns, &ctrl->subsys->namespaces, dev_link) {
+		ret = nvmet_p2pdma_add_client(ctrl, ns);
+		if (ret)
+			goto free_devices;

I think that at some point we said that this looks like it should fall
back to host memory for those namespaces.. when we allocate the sgl we
already assigned a namespace to the request (nvmet_req_init).

Aside from my questions the patch looks good.



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux