Re: [PATCH] Performance Improvement in CRC16 Calculations.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Don't be so sure that slice by 16 provides the best performance.

Some time ago, I did the comparison for CRC32 between slice by 4 and slice by 8 (as included in the kernel), and the result is the following on an mpc8xx (powerpc/32)

With CONFIG_CRC32_SLICEBY8:
[ 1.109204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 1.114401] crc32: self tests passed, processed 225944 bytes in 15118910 nsec
[ 1.130655] crc32c: CRC_LE_BITS = 64
[ 1.134235] crc32c: self tests passed, processed 225944 bytes in 4479879 nsec

With CONFIG_CRC32_SLICEBY4:
[ 1.097129] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 1.101878] crc32: self tests passed, processed 225944 bytes in 8616242 nsec
[ 1.116298] crc32c: CRC_LE_BITS = 32
[ 1.119607] crc32c: self tests passed, processed 225944 bytes in 3289576 nsec

As you can see, slice by 4 is better than slice by 8 on that CPU.

So I'm sure it is worth doing the test for CRC16 as well.

Christophe

Le 16/08/2018 à 16:02, Jeffrey Lien a écrit :
Eric,
We did not test the slice by 4 or 8 tables.  I'm not sure of  the value of doing that since the slice by 16 will provide the best performance gain.   If I'm missing anything here, please let me know.

I'm working on a new version of the patch based on the feedback from others and will also change the pointer variables to start with p and fix the indenting you mentioned below in the new version of the patch.

Thanks

Jeff Lien

-----Original Message-----
From: Eric Biggers [mailto:ebiggers@xxxxxxxxxx]
Sent: Friday, August 10, 2018 3:16 PM
To: Jeffrey Lien <Jeff.Lien@xxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-crypto@xxxxxxxxxxxxxxx; linux-block@xxxxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; herbert@xxxxxxxxxxxxxxxxxxx; tim.c.chen@xxxxxxxxxxxxxxx; martin.petersen@xxxxxxxxxx; David Darrington <david.darrington@xxxxxxx>; Jeff Furlong <jeff.furlong@xxxxxxx>
Subject: Re: [PATCH] Performance Improvement in CRC16 Calculations.

On Fri, Aug 10, 2018 at 02:12:11PM -0500, Jeff Lien wrote:
This patch provides a performance improvement for the CRC16
calculations done in read/write workloads using the T10 Type 1/2/3
guard field.  For example, today with sequential write workloads (one
thread/CPU of IO) we consume 100% of the CPU because of the CRC16
computation bottleneck.  Today's block devices are considerably
faster, but the CRC16 calculation prevents folks from utilizing the
throughput of such devices.  To speed up this calculation and expose
the block device throughput, we slice the old single byte for loop into a 16 byte for loop, with a larger CRC table to match.  The result has shown 5x performance improvements on various big endian and little endian systems running the 4.18.0 kernel version.

FIO Sequential Write, 64K Block Size, Queue Depth 64
BE Base Kernel:        bw=201.5 MiB/s
BE Modified CRC Calc:  bw=968.1 MiB/s
4.80x performance improvement

LE Base Kernel:        bw=357 MiB/s
LE Modified CRC Calc:  bw=1964 MiB/s
5.51x performance improvement

FIO Sequential Read, 64K Block Size, Queue Depth 64
BE Base Kernel:        bw=611.2 MiB/s
BE Modified CRC calc:  bw=684.9 MiB/s
1.12x performance improvement

LE Base Kernel:        bw=797 MiB/s
LE Modified CRC Calc:  bw=2730 MiB/s
3.42x performance improvement

Did you also test the slice-by-4 (requires 2048-byte table) and slice-by-8 (requires 4096-byte table) methods?  Your proposal is slice-by-16 (requires 8192-byte table); the original was slice-by-1 (requires 512-byte table).

  __u16 crc_t10dif_generic(__u16 crc, const unsigned char *buffer,
size_t len)  {
-	unsigned int i;
+	const __u8 *i = (const __u8 *)buffer;
+	const __u8 *i_end = i + len;
+	const __u8 *i_last16 = i + (len / 16 * 16);

'i' is normally a loop counter, not a pointer.
Use 'p', 'p_end', and 'p_last16'.

- for (i = 0 ; i < len ; i++)
-		crc = (crc << 8) ^ t10_dif_crc_table[((crc >> 8) ^ buffer[i]) & 0xff];
+	for (; i < i_last16; i += 16) {
+		crc = t10_dif_crc_table[15][i[0] ^ (__u8)(crc >>  8)] ^
+		t10_dif_crc_table[14][i[1] ^ (__u8)(crc >>  0)] ^
+		t10_dif_crc_table[13][i[2]] ^
+		t10_dif_crc_table[12][i[3]] ^
+		t10_dif_crc_table[11][i[4]] ^
+		t10_dif_crc_table[10][i[5]] ^
+		t10_dif_crc_table[9][i[6]] ^
+		t10_dif_crc_table[8][i[7]] ^
+		t10_dif_crc_table[7][i[8]] ^
+		t10_dif_crc_table[6][i[9]] ^
+		t10_dif_crc_table[5][i[10]] ^
+		t10_dif_crc_table[4][i[11]] ^
+		t10_dif_crc_table[3][i[12]] ^
+		t10_dif_crc_table[2][i[13]] ^
+		t10_dif_crc_table[1][i[14]] ^
+		t10_dif_crc_table[0][i[15]];
+	}

Please indent this properly.

		crc = t10_dif_crc_table[15][i[0] ^ (__u8)(crc >>  8)] ^
		      t10_dif_crc_table[14][i[1] ^ (__u8)(crc >>  0)] ^
		      t10_dif_crc_table[13][i[2]] ^
		      t10_dif_crc_table[12][i[3]] ^
		      t10_dif_crc_table[11][i[4]] ^
		      ...

- Eric




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux