Re: [PATCH] lightnvm: pblk: recover chunk state on 1.2 devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/24/2018 09:54 AM, Javier Gonzalez wrote:
On 29 Jun 2018, at 13.28, Matias Bjørling <mb@xxxxxxxxxxx> wrote:

On 06/29/2018 01:22 PM, Javier Gonzalez wrote:
On 29 Jun 2018, at 13.14, Matias Bjørling <mb@xxxxxxxxxxx> wrote:

On 06/28/2018 11:12 AM, Javier González wrote:
The Open-Channel 1.2 spec does not define a mechanism for the host to
recover the block (chunk) state. As a consequence, a newly format device
will need to reconstruct the state. Currently, pblk assumes that blocks
are not erased, which might cause double-erases in case that the device
does not protect itself against them (which is not specified in the spec
either).

It should not be specified in the spec. It is up to the device to handle
double erases and not do it.

This patch, reconstructs the state based on read errors. If the first
sector of a block returns and empty page (NVM_RSP_ERR_EMPTYPAGE), then
the block s marked free, i.e., erased and ready to be used
(NVM_CHK_ST_FREE). Otherwise, the block is marked as closed
(NVM_CHK_ST_CLOSED). Note that even if a block is open and not fully
written, it has to be erased in order to be used again.

Should we extend it to do the scan, and update the write pointer as
well? I think this kind of feature already is baked into pblk?
This is already in place: we scan until empty page and take it from
there. This patch is only for the case in which we start a pblk instance
form scratch. On a device already owned by pblk, we would not have the
problem we are trying to solve here because we know the state.

Agree. What I meant was that when we anyway are recovering the state,
we could just as well update ->wp and set to NVM_CHK_ST_OPEN and so
forth for the initialization phase.


In 1.2 the use of chunk metadata is purely fictional. We respect the
chunk state machine as we transition lines, but all the write pointers
are ignored. Instead, we use the line bitmap to point to the next
writable entry. This is BTW the same way we it in open lines on 2.0 too.


Now I understand where you are coming from. I had the understanding that we where using the write pointer now that we moved to 2.0, looking through the code, that wasn't the case. :) Which means that pblk doesn't work with a devices that implements 2.0. Yikes... I knew I had forgot a detail when support was added into pblk.

There are no empty sector marker in the 2.0 spec, since it uses the write pointer to know where it is in the chunk. So there is a bit of work to do there.

Since this properly is a bit more work to do, I'll look into it after FMS.

I'm also moving the explicit coding of 1.2/2.0 chunk / bad block fixing into core, so pblk can be simplfied, and doesn't have to think to manage each version separately.


Chunk metadata is only used to setup the bitmaps on init/recovery. From
here on, we use the bitmap to find the next writable sector, without
worrying about the specific per-chunk write pointer. Thus, updating
chunk metadata here has no effect.

Does this make sense to you?

Javier





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux