Split blk_add_timer() as follows:
- Introduce the helper function __blk_add_timer() that performs the
tasks that apply both to the legacy block layer core and to blk-mq.
- Duplicate the remaining blk_add_timer() function into the new
function blk_mq_add_timer().
- Change the blk_mq_timer() calls into blk_mq_add_timer() calls in
blk-mq code.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Keith Busch <keith.busch@xxxxxxxxx>
Cc: Jianchao Wang <jianchao.w.wang@xxxxxxxxxx>
Cc: Ming Lei <ming.lei@xxxxxxxxxx>
---
block/blk-mq.c | 4 +--
block/blk-timeout.c | 81 +++++++++++++++++++++++++++++++++++----------
block/blk.h | 1 +
3 files changed, 66 insertions(+), 20 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 96e1a7f25875..1b49973629f6 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -644,7 +644,7 @@ void blk_mq_start_request(struct request *rq)
WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IDLE);
- blk_add_timer(rq);
+ blk_mq_add_timer(rq);
WRITE_ONCE(rq->state, MQ_RQ_IN_FLIGHT);
if (q->dma_drain_size && blk_rq_bytes(rq)) {
@@ -779,7 +779,7 @@ static void blk_mq_rq_timed_out(struct request *req, bool reserved)
WARN_ON_ONCE(ret != BLK_EH_RESET_TIMER);
}
- blk_add_timer(req);
+ blk_mq_add_timer(req);
}
static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 37df7f8f8516..527670f2f985 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -181,6 +181,33 @@ unsigned long blk_rq_timeout(unsigned long timeout)
return timeout;
}
+static void __blk_add_timer(struct request *req, unsigned long deadline)
+{
+ struct request_queue *q = req->q;
+ unsigned long expiry;
+
+ /*
+ * If the timer isn't already pending or this timeout is earlier
+ * than an existing one, modify the timer. Round up to next nearest
+ * second.
+ */
+ expiry = blk_rq_timeout(round_jiffies_up(deadline));
+ if (!timer_pending(&q->timeout) ||
+ time_before(expiry, q->timeout.expires)) {
+ unsigned long diff = q->timeout.expires - expiry;
+
+ /*
+ * Due to added timer slack to group timers, the timer
+ * will often be a little in front of what we asked for.
+ * So apply some tolerance here too, otherwise we keep
+ * modifying the timer because expires for value X
+ * will be X + something.
+ */
+ if (!timer_pending(&q->timeout) || (diff >= HZ / 2))
+ mod_timer(&q->timeout, expiry);
+ }
+}
+
/**
* blk_add_timer - Start timeout timer for a single request
* @req: request that is about to start running.
@@ -192,7 +219,6 @@ unsigned long blk_rq_timeout(unsigned long timeout)
void blk_add_timer(struct request *req)
{
struct request_queue *q = req->q;
- unsigned long expiry;
if (!q->mq_ops)
lockdep_assert_held(q->queue_lock);
@@ -220,26 +246,45 @@ void blk_add_timer(struct request *req)
if (!q->mq_ops)
list_add_tail(&req->timeout_list, &req->q->timeout_list);
+ __blk_add_timer(req, blk_rq_deadline(req));
+}
+
+/**
+ * blk_mq_add_timer - set the deadline for a single request
+ * @req: request for which to set the deadline.
+ *
+ * Sets the deadline of a request. The caller must guarantee that the request
+ * state won't be modified while this function is in progress.
+ */
+void blk_mq_add_timer(struct request *req)
+{
+ struct request_queue *q = req->q;
+
+ if (!q->mq_ops)
+ lockdep_assert_held(q->queue_lock);
+
+ /* blk-mq has its own handler, so we don't need ->rq_timed_out_fn */
+ if (!q->mq_ops && !q->rq_timed_out_fn)
+ return;
+
+ BUG_ON(!list_empty(&req->timeout_list));
+
/*
- * If the timer isn't already pending or this timeout is earlier
- * than an existing one, modify the timer. Round up to next nearest
- * second.
+ * Some LLDs, like scsi, peek at the timeout to prevent a
+ * command from being retried forever.
*/
- expiry = blk_rq_timeout(round_jiffies_up(blk_rq_deadline(req)));
+ if (!req->timeout)
+ req->timeout = q->rq_timeout;
- if (!timer_pending(&q->timeout) ||
- time_before(expiry, q->timeout.expires)) {
- unsigned long diff = q->timeout.expires - expiry;
+ req->rq_flags &= ~RQF_TIMED_OUT;
+ blk_rq_set_deadline(req, jiffies + req->timeout);
- /*
- * Due to added timer slack to group timers, the timer
- * will often be a little in front of what we asked for.
- * So apply some tolerance here too, otherwise we keep
- * modifying the timer because expires for value X
- * will be X + something.
- */
- if (!timer_pending(&q->timeout) || (diff >= HZ / 2))
- mod_timer(&q->timeout, expiry);
- }
+ /*
+ * Only the non-mq case needs to add the request to a protected list.
+ * For the mq case we simply scan the tag map.
+ */
+ if (!q->mq_ops)
+ list_add_tail(&req->timeout_list, &req->q->timeout_list);
+ __blk_add_timer(req, blk_rq_deadline(req));
}
diff --git a/block/blk.h b/block/blk.h
index 69b14cd2bb22..6adae8f94279 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -170,6 +170,7 @@ static inline bool bio_integrity_endio(struct bio *bio)
void blk_timeout_work(struct work_struct *work);
unsigned long blk_rq_timeout(unsigned long timeout);
void blk_add_timer(struct request *req);
+void blk_mq_add_timer(struct request *req);
void blk_delete_timer(struct request *);
--
2.18.0
