On Mon, Jul 16, 2018 at 7:55 PM, Coly Li <colyli@xxxxxxx> wrote:
> This patch adds a kernel module to test the consistency of multiple crc
> calculation in Linux kernel. It is enabled with CONFIG_TEST_CRC enabled.
>
> The test results are printed into kernel message, which look like,
>
> test_crc: crc64_le: PASSED (0x4e6b> +
1ff972fa8c55, expval 0x4e6b1ff972fa8c55)
> test_crc: crc64_le_bch: PASSED (0x0e4f1391d7a4a62e, expval 0x0e4f1391d7a4a62e)
> test_crc: crc64_le_update: FAILED (0x03d4d0d85685d9a1, expval 0x3d4d0d85685d9a1f)
>
> kernel 0day system has framework to check kernel message, then the above
> result can be handled by 0day system. If crc calculation inconsistency
> happens, it can be detected quite soon.
>
> lib/test_crc.c can is a testing frame work for all crc consistency
> testings. For now, there are only test caes for 3 crc routines,
> - crc64_le()
> - crc64_le_bch()
> - crc64_le_update()
> +config TEST_CRC
> + tristate "CRC calculation test driver"
> + default n
Default default is n.
> + depends on CRC64
> +#include <linux/init.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/printk.h>
> +#include <linux/fs.h>
> +#include <linux/miscdevice.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +#include <linux/async.h>
> +#include <linux/delay.h>
> +#include <linux/vmalloc.h>
> +#include <linux/crc64.h>
Perhaps in order?
Moreover, either init.h or module.h depending on the Kconfig (here
seems module.h is a right choice).
> +struct crc_test_record {
> +
Redundant.
> + char *name;
> + __le64 data[4];
> + __le64 initval;
> + __le64 expval;
> + int (*handler)(struct crc_test_record *rec);
> +};
> +
> +static int chk_and_msg(const char *name, __le64 crc, __le64 expval)
> +{
> + int ret = 0;
> +
> + if (crc == expval) {
> + pr_info("test_crc: %s: PASSED:(0x%016llx, expval 0x%016llx)",
> + name, crc, expval);
> + } else {
> + pr_err("test_crc: %s: FAILED:(0x%016llx, expval 0x%016llx)",
> + name, crc, expval);
> + ret = -EINVAL;
> + }
> +
> + return ret;
Perhaps collect statistics instead how it's done in many other tests?
> +}
> +
> +/* Add your crc test caese here */
caese ?
> +static int test_crc64_le(struct crc_test_record *rec)
> +{
> + __le64 crc;
> +
> + crc = crc64_le(rec->data, sizeof(rec->data));
> + return chk_and_msg(rec->name, crc, rec->expval);
> +
Redundant.
> +}
> + { .name = NULL, }
Simple {} would work.
> +static int __init test_crc_init(void)
> +{
> + int i;
> + int v, ret = 0;
> +
> + pr_info("Kernel crc consitency testing:");
> + for (i = 0; test_data[i].name; i++) {
> + v = test_data[i].handler(&test_data[i]);
> + if (v < 0 && ret == 0)
> + ret = -EINVAL;
A bit strange. Anyway, better to collect statistics and print it at
the end with corresponding return code.
> + }
> +
> + return ret;
> +}
> +late_initcall(test_crc_init);
Why?
> +static void __exit test_crc_exit(void) { }
> +module_exit(test_crc_exit);
> +MODULE_LICENSE("GPL");
It's not the same as in SPDX.
--
With Best Regards,
Andy Shevchenko
