Re: [PATCH v2 14/26] ibtrs: include client and server modules into kernel compilation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 22, 2018 at 11:27:21AM +0200, Roman Penyaev wrote:
> On Tue, May 22, 2018 at 7:05 AM, Leon Romanovsky <leon@xxxxxxxxxx> wrote:
> > On Fri, May 18, 2018 at 03:04:01PM +0200, Roman Pen wrote:
> >> Add IBTRS Makefile, Kconfig and also corresponding lines into upper
> >> layer infiniband/ulp files.
> >>
> >> Signed-off-by: Roman Pen <roman.penyaev@xxxxxxxxxxxxxxxx>
> >> Signed-off-by: Danil Kipnis <danil.kipnis@xxxxxxxxxxxxxxxx>
> >> Cc: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxxx>
> >> ---
> >>  drivers/infiniband/Kconfig            |  1 +
> >>  drivers/infiniband/ulp/Makefile       |  1 +
> >>  drivers/infiniband/ulp/ibtrs/Kconfig  | 20 ++++++++++++++++++++
> >>  drivers/infiniband/ulp/ibtrs/Makefile | 15 +++++++++++++++
> >>  4 files changed, 37 insertions(+)
> >>  create mode 100644 drivers/infiniband/ulp/ibtrs/Kconfig
> >>  create mode 100644 drivers/infiniband/ulp/ibtrs/Makefile
> >>
> >> diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
> >> index ee270e065ba9..787bd286fb08 100644
> >> --- a/drivers/infiniband/Kconfig
> >> +++ b/drivers/infiniband/Kconfig
> >> @@ -94,6 +94,7 @@ source "drivers/infiniband/ulp/srpt/Kconfig"
> >>
> >>  source "drivers/infiniband/ulp/iser/Kconfig"
> >>  source "drivers/infiniband/ulp/isert/Kconfig"
> >> +source "drivers/infiniband/ulp/ibtrs/Kconfig"
> >>
> >>  source "drivers/infiniband/ulp/opa_vnic/Kconfig"
> >>  source "drivers/infiniband/sw/rdmavt/Kconfig"
> >> diff --git a/drivers/infiniband/ulp/Makefile b/drivers/infiniband/ulp/Makefile
> >> index 437813c7b481..1c4f10dc8d49 100644
> >> --- a/drivers/infiniband/ulp/Makefile
> >> +++ b/drivers/infiniband/ulp/Makefile
> >> @@ -5,3 +5,4 @@ obj-$(CONFIG_INFINIBAND_SRPT)         += srpt/
> >>  obj-$(CONFIG_INFINIBAND_ISER)                += iser/
> >>  obj-$(CONFIG_INFINIBAND_ISERT)               += isert/
> >>  obj-$(CONFIG_INFINIBAND_OPA_VNIC)    += opa_vnic/
> >> +obj-$(CONFIG_INFINIBAND_IBTRS)               += ibtrs/
> >> diff --git a/drivers/infiniband/ulp/ibtrs/Kconfig b/drivers/infiniband/ulp/ibtrs/Kconfig
> >> new file mode 100644
> >> index 000000000000..eaeb8f3f6b4e
> >> --- /dev/null
> >> +++ b/drivers/infiniband/ulp/ibtrs/Kconfig
> >> @@ -0,0 +1,20 @@
> >> +config INFINIBAND_IBTRS
> >> +     tristate
> >> +     depends on INFINIBAND_ADDR_TRANS
> >> +
> >> +config INFINIBAND_IBTRS_CLIENT
> >> +     tristate "IBTRS client module"
> >> +     depends on INFINIBAND_ADDR_TRANS
> >> +     select INFINIBAND_IBTRS
> >> +     help
> >> +       IBTRS client allows for simplified data transfer and connection
> >> +       establishment over RDMA (InfiniBand, RoCE, iWarp). Uses BIO-like
> >> +       READ/WRITE semantics and provides multipath capabilities.
> >> +
> >> +config INFINIBAND_IBTRS_SERVER
> >> +     tristate "IBTRS server module"
> >> +     depends on INFINIBAND_ADDR_TRANS
> >> +     select INFINIBAND_IBTRS
> >> +     help
> >> +       IBTRS server module processing connection and IO requests received
> >> +       from the IBTRS client module.
> >> diff --git a/drivers/infiniband/ulp/ibtrs/Makefile b/drivers/infiniband/ulp/ibtrs/Makefile
> >> new file mode 100644
> >> index 000000000000..e6ea858745ad
> >> --- /dev/null
> >> +++ b/drivers/infiniband/ulp/ibtrs/Makefile
> >> @@ -0,0 +1,15 @@
> >> +ibtrs-client-y := ibtrs-clt.o \
> >> +               ibtrs-clt-stats.o \
> >> +               ibtrs-clt-sysfs.o
> >> +
> >> +ibtrs-server-y := ibtrs-srv.o \
> >> +               ibtrs-srv-stats.o \
> >> +               ibtrs-srv-sysfs.o
> >> +
> >> +ibtrs-core-y := ibtrs.o
> >> +
> >> +obj-$(CONFIG_INFINIBAND_IBTRS)        += ibtrs-core.o
> >
> > Will it build ibtrs-core in case both server and client are disabled in .config?
>
> No, CONFIG_INFINIBAND_IBTRS is selected/deselected by
> CONFIG_INFINIBAND_IBTRS_CLIENT or CONFIG_INFINIBAND_IBTRS_SERVER,
> when you choose them in kconfig.
>

Thanks

>
> >> +obj-$(CONFIG_INFINIBAND_IBTRS_CLIENT) += ibtrs-client.o
> >> +obj-$(CONFIG_INFINIBAND_IBTRS_SERVER) += ibtrs-server.o
> >> +
> >> +-include $(src)/compat/compat.mk
> >
> > What is this?
>
> Well, in our production we use same source code and in order not to spoil
> sources with 'ifdef' macros for different kernel versions I use compat
> layer, which obviously will never go upstream.  This line is the only
> clean way to keep sources always up-to-date with latest kernel and still
> be compatible with what we have on our servers in production.
>
> '-' prefix at the beginning of the line tells make to ignore it if
> file does not exist, so should not rise any error for compilation
> against latest kernel.
>
> Here is an example of the compat layer for IBNBD block device:
> https://github.com/profitbricks/ibnbd/tree/master/ibnbd/compat

I see it, you will need to remove this line from the upstream kernel
patches.

Thanks

>
> --
> Roman

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux