Re: [PATCH 00/10] Misc block layer patches for bcachefs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, May 20, 2018 at 10:35:29PM +0000, Bart Van Assche wrote:
> On Sun, 2018-05-20 at 18:31 -0400, Kent Overstreet wrote:
> > On Sun, May 20, 2018 at 10:19:13PM +0000, Bart Van Assche wrote:
> > > On Sun, 2018-05-20 at 18:17 -0400, Kent Overstreet wrote:
> > > > On Fri, May 18, 2018 at 03:12:27PM +0000, Bart Van Assche wrote:
> > > > > On Fri, 2018-05-18 at 05:06 -0400, Kent Overstreet wrote:
> > > > > > On Thu, May 17, 2018 at 08:54:57PM +0000, Bart Van Assche wrote:
> > > > > > > With Jens' latest for-next branch I hit the kernel warning shown below. Can
> > > > > > > you have a look?
> > > > > > 
> > > > > > Any hints on how to reproduce it?
> > > > > 
> > > > > Sure. This is how I triggered it:
> > > > > * Clone https://github.com/bvanassche/srp-test.
> > > > > * Follow the instructions in README.md.
> > > > > * Run srp-test/run_tests -c -r 10
> > > > 
> > > > Can you bisect it? I don't have infiniband hardware handy...
> > > 
> > > Hello Kent,
> > > 
> > > Have you noticed that the test I described uses the rdma_rxe driver and hence that
> > > no InfiniBand hardware is needed to run that test?
> > 
> > No, I'm not terribly familiar with infiniband stuff....
> > 
> > Do you have some sort of self contained test/qemu recipe? I would really rather
> > not have to figure out how to configure multipath, and infiniband, and I'm not
> > even sure what else is needed based on that readme...
> 
> Hello Kent,
> 
> Please have another look at the srp-test README. The instructions in that document
> are easy to follow. No multipath nor any InfiniBand knowledge is required. The test
> even can be run in a virtual machine in case you would be worried about potential
> impact of the test on the rest of the system.


I really have better things to do than debug someone else's tests...

Restarting multipath-tools (via systemctl): multipath-tools.service.
multipathd> reconfigure
ok
multipathd> make -C discontiguous-io discontiguous-io
make[1]: Entering directory '/host/home/kent/ktest/tests/srp-test/discontiguous-io'
make[1]: 'discontiguous-io' is up to date.
make[1]: Leaving directory '/host/home/kent/ktest/tests/srp-test/discontiguous-io'
Unloaded the ib_srpt kernel module
Unloaded the rdma_rxe kernel module
../run_tests: line 65: cd: /lib/modules/4.16.0+/kernel/block: No such file or directory
Zero-initializing /dev/ram0 ... done
Zero-initializing /dev/ram1 ... done
Unable to load target_core_pscsi
Unable to load target_core_user
Configured SRP target driver
Running test ../tests/01 ...
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/01 failed
Running test ../tests/02-mq ...
Test file I/O on top of multipath concurrently with logout and login (10 min; mq)
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/02-mq failed
Running test ../tests/02-sq ...
Test file I/O on top of multipath concurrently with logout and login (10 min; sq)
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/02-sq failed
Running test ../tests/02-sq-on-mq ...
Test file I/O on top of multipath concurrently with logout and login (10 min; sq-on-mq)
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/02-sq-on-mq failed
Running test ../tests/03-4M ...
Test direct I/O with large transfer sizes and cmd_sg_entries=255
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/03-4M failed
Running test ../tests/03-8M ...
Test direct I/O with large transfer sizes and cmd_sg_entries=255
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/03-8M failed
Running test ../tests/04-4M ...
Test direct I/O with large transfer sizes and cmd_sg_entries=1
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/04-4M failed
Running test ../tests/04-8M ...
Test direct I/O with large transfer sizes and cmd_sg_entries=1
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/04-8M failed
Running test ../tests/05-4M ...
Test buffered I/O with large transfer sizes and cmd_sg_entries=255
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/05-4M failed
Running test ../tests/05-8M ...
Test buffered I/O with large transfer sizes and cmd_sg_entries=255
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/05-8M failed
Running test ../tests/06 ...
Test block I/O on top of multipath concurrently with logout and login (10 min)
Unloaded the ib_srp kernel module
SRP login failed
Test ../tests/06 failed
0 tests succeeded and 11 tests failed
Unloaded the ib_srpt kernel module
Unloaded the rdma_rxe kernel module

========= PASSED srp in 18s



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux