Re: [PATCH V4 0/7] nvme: pci: fix & improve timeout handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 05, 2018 at 07:11:33PM -0400, Laurence Oberman wrote:
> On Sat, 2018-05-05 at 21:58 +0800, Ming Lei wrote:
> > Hi,
> > 
> > The 1st patch introduces blk_quiesce_timeout() and
> > blk_unquiesce_timeout()
> > for NVMe, meantime fixes blk_sync_queue().
> > 
> > The 2nd patch covers timeout for admin commands for recovering
> > controller
> > for avoiding possible deadlock.
> > 
> > The 3rd and 4th patches avoid to wait_freeze on queues which aren't
> > frozen.
> > 
> > The last 4 patches fixes several races wrt. NVMe timeout handler, and
> > finally can make blktests block/011 passed. Meantime the NVMe PCI
> > timeout
> > mecanism become much more rebost than before.
> > 
> > gitweb:
> > 	https://github.com/ming1/linux/commits/v4.17-rc-nvme-timeout.V4
> > 
> > V4:
> > 	- fixe nvme_init_set_host_mem_cmd()
> > 	- use nested EH model, and run both nvme_dev_disable() and
> > 	resetting in one same context
> > 
> > V3:
> > 	- fix one new race related freezing in patch 4,
> > nvme_reset_work()
> > 	may hang forever without this patch
> > 	- rewrite the last 3 patches, and avoid to break
> > nvme_reset_ctrl*()
> > 
> > V2:
> > 	- fix draining timeout work, so no need to change return value
> > from
> > 	.timeout()
> > 	- fix race between nvme_start_freeze() and nvme_unfreeze()
> > 	- cover timeout for admin commands running in EH
> > 
> > Ming Lei (7):
> >   block: introduce blk_quiesce_timeout() and blk_unquiesce_timeout()
> >   nvme: pci: cover timeout for admin commands running in EH
> >   nvme: pci: only wait freezing if queue is frozen
> >   nvme: pci: freeze queue in nvme_dev_disable() in case of error
> >     recovery
> >   nvme: core: introduce 'reset_lock' for sync reset state and reset
> >     activities
> >   nvme: pci: prepare for supporting error recovery from resetting
> >     context
> >   nvme: pci: support nested EH
> > 
> >  block/blk-core.c         |  21 +++-
> >  block/blk-mq.c           |   9 ++
> >  block/blk-timeout.c      |   5 +-
> >  drivers/nvme/host/core.c |  46 ++++++-
> >  drivers/nvme/host/nvme.h |   5 +
> >  drivers/nvme/host/pci.c  | 304
> > ++++++++++++++++++++++++++++++++++++++++-------
> >  include/linux/blkdev.h   |  13 ++
> >  7 files changed, 356 insertions(+), 47 deletions(-)
> > 
> > Cc: Jianchao Wang <jianchao.w.wang@xxxxxxxxxx>
> > Cc: Christoph Hellwig <hch@xxxxxx>
> > Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
> > Cc: linux-nvme@xxxxxxxxxxxxxxxxxxx
> > Cc: Laurence Oberman <loberman@xxxxxxxxxx>
> 
> Hello Ming
> 
> I have a two node NUMA system here running your kernel tree
> 4.17.0-rc3.ming.nvme+
> 
> [root@segstorage1 ~]# numactl --hardware
> available: 2 nodes (0-1)
> node 0 cpus: 0 3 5 6 8 11 13 14
> node 0 size: 63922 MB
> node 0 free: 61310 MB
> node 1 cpus: 1 2 4 7 9 10 12 15
> node 1 size: 64422 MB
> node 1 free: 62372 MB
> node distances:
> node   0   1 
>   0:  10  20 
>   1:  20  10 
> 
> I ran block/011
> 
> [root@segstorage1 blktests]# ./check block/011
> block/011 => nvme0n1 (disable PCI device while doing I/O)    [failed]
>     runtime    ...  106.936s
>     --- tests/block/011.out	2018-05-05 18:01:14.268414752 -0400
>     +++ results/nvme0n1/block/011.out.bad	2018-05-05
> 19:07:21.028634858 -0400
>     @@ -1,2 +1,36 @@
>      Running block/011
>     +fio: ioengines.c:289: td_io_queue: Assertion `(io_u->flags &
> IO_U_F_FLIGHT) == 0' failed.
>     +fio: ioengines.c:289: td_io_queue: Assertion `(io_u->flags &
> IO_U_F_FLIGHT) == 0' failed.
>     +fio: ioengines.c:289: td_io_queue: Assertion `(io_u->flags &
> IO_U_F_FLIGHT) == 0' failed.
>     +fio: ioengines.c:289: td_io_queue: Assertion `(io_u->flags &
> IO_U_F_FLIGHT) == 0' failed.
>     +fio: ioengines.c:289: td_io_queue: Assertion `(io_u->flags &
> IO_U_F_FLIGHT) == 0' failed.
>     +fio: ioengines.c:289: td_io_queue: Assertion `(io_u->flags &
> IO_U_F_FLIGHT) == 0' failed.
>     ...
>     (Run 'diff -u tests/block/011.out
> results/nvme0n1/block/011.out.bad' to see the entire diff)
> 
> [ 1421.738551] run blktests block/011 at 2018-05-05 19:05:34
> [ 1452.676351] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.718221] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.718239] nvme nvme0: EH 0: before shutdown
> [ 1452.760890] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760894] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760897] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760900] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760903] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760906] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760909] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760912] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760915] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760918] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760921] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760923] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1452.760926] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1453.330251] nvme nvme0: controller is down; will reset: CSTS=0x3,
> PCI_STATUS=0x10
> [ 1453.391713] nvme nvme0: EH 0: after shutdown
> [ 1456.804695] device-mapper: multipath: Failing path 259:0.
> [ 1526.721196] nvme nvme0: I/O 15 QID 0 timeout, disable controller
> [ 1526.754335] nvme nvme0: EH 1: before shutdown
> [ 1526.793257] nvme nvme0: EH 1: after shutdown
> [ 1526.793327] nvme nvme0: Identify Controller failed (-4)
> [ 1526.847869] nvme nvme0: Removing after probe failure status: -5
> [ 1526.888206] nvme nvme0: EH 0: after recovery
> [ 1526.888212] nvme0n1: detected capacity change from 400088457216 to 0
> [ 1526.947520] print_req_error: 1 callbacks suppressed
> [ 1526.947522] print_req_error: I/O error, dev nvme0n1, sector 794920
> [ 1526.947534] print_req_error: I/O error, dev nvme0n1, sector 569328
> [ 1526.947540] print_req_error: I/O error, dev nvme0n1, sector 1234608
> [ 1526.947556] print_req_error: I/O error, dev nvme0n1, sector 389296
> [ 1526.947564] print_req_error: I/O error, dev nvme0n1, sector 712432
> [ 1526.947566] print_req_error: I/O error, dev nvme0n1, sector 889304
> [ 1526.947572] print_req_error: I/O error, dev nvme0n1, sector 205776
> [ 1526.947574] print_req_error: I/O error, dev nvme0n1, sector 126480
> [ 1526.947575] print_req_error: I/O error, dev nvme0n1, sector 1601232
> [ 1526.947580] print_req_error: I/O error, dev nvme0n1, sector 1234360
> [ 1526.947745] Pid 683(fio) over core_pipe_limit
> [ 1526.947746] Skipping core dump
> [ 1526.947747] Pid 675(fio) over core_pipe_limit
> [ 1526.947748] Skipping core dump
> [ 1526.947863] Pid 672(fio) over core_pipe_limit
> [ 1526.947863] Skipping core dump
> [ 1526.947865] Pid 674(fio) over core_pipe_limit
> [ 1526.947866] Skipping core dump
> [ 1526.947870] Pid 676(fio) over core_pipe_limit
> [ 1526.947871] Pid 679(fio) over core_pipe_limit
> [ 1526.947872] Skipping core dump
> [ 1526.947872] Skipping core dump
> [ 1526.948197] Pid 677(fio) over core_pipe_limit
> [ 1526.948197] Skipping core dump
> [ 1526.948245] Pid 686(fio) over core_pipe_limit
> [ 1526.948245] Skipping core dump
> [ 1526.974610] Pid 680(fio) over core_pipe_limit
> [ 1526.974611] Pid 684(fio) over core_pipe_limit
> [ 1526.974611] Skipping core dump
> [ 1526.980370] nvme nvme0: failed to mark controller CONNECTING
> [ 1526.980373] nvme nvme0: Removing after probe failure status: -19
> [ 1526.980385] nvme nvme0: EH 1: after recovery
> [ 1526.980477] Pid 687(fio) over core_pipe_limit
> [ 1526.980478] Skipping core dump
> [ 1527.858207] Skipping core dump
> 
> And leaves me looping here
> 
> [ 1721.272276] INFO: task kworker/u66:0:24214 blocked for more than 120
> seconds.
> [ 1721.311263]       Tainted: G          I       4.17.0-rc3.ming.nvme+
> #1
> [ 1721.348027] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> [ 1721.392957] kworker/u66:0   D    0 24214      2 0x80000080
> [ 1721.424425] Workqueue: nvme-wq nvme_remove_dead_ctrl_work [nvme]
> [ 1721.458568] Call Trace:
> [ 1721.472499]  ? __schedule+0x290/0x870
> [ 1721.493515]  schedule+0x32/0x80
> [ 1721.511656]  blk_mq_freeze_queue_wait+0x46/0xb0
> [ 1721.537609]  ? remove_wait_queue+0x60/0x60
> [ 1721.561081]  blk_cleanup_queue+0x7e/0x180
> [ 1721.584637]  nvme_ns_remove+0x106/0x140 [nvme_core]
> [ 1721.612589]  nvme_remove_namespaces+0x8e/0xd0 [nvme_core]
> [ 1721.643163]  nvme_remove+0x80/0x120 [nvme]
> [ 1721.666188]  pci_device_remove+0x3b/0xc0
> [ 1721.688553]  device_release_driver_internal+0x148/0x220
> [ 1721.719332]  nvme_remove_dead_ctrl_work+0x29/0x40 [nvme]
> [ 1721.750474]  process_one_work+0x158/0x360
> [ 1721.772632]  worker_thread+0x47/0x3e0
> [ 1721.792471]  kthread+0xf8/0x130
> [ 1721.810354]  ? max_active_store+0x80/0x80
> [ 1721.832459]  ? kthread_bind+0x10/0x10
> [ 1721.852845]  ret_from_fork+0x35/0x40
> 
> Did I di something wrong
> 
> I never set anything else, the nvme0n1 was not mounted etc.

Hi Laurence,

Thanks for your test!

Could you run the following V5(not posted yest) and see if
the issues you triggered can be fixed? If not, please provide
me the dmesg log.

https://github.com/ming1/linux/commits/v4.17-rc-nvme-timeout.V5

BTW, the main change is on handling reset failure, in V5, only
the failure from top EH is handled.

Thanks,
Ming



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux