Re: Multi-Actuator SAS HDD First Look

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-04-05 07:43 PM, Tim Walker wrote:
On Tue, Apr 3, 2018 at 1:46 AM, Christoph Hellwig <hch@xxxxxxxxxxxxx> wrote:
On Sat, Mar 31, 2018 at 01:03:46PM +0200, Hannes Reinecke wrote:
Actually I would propose to have a 'management' LUN at LUN0, who could
handle all the device-wide commands (eg things like START STOP UNIT,
firmware update, or even SMART commands), and ignoring them for the
remaining LUNs.

That is in fact the only workable option at all.  Everything else
completly breaks the scsi architecture.

Here's an update: Seagate will eliminate the inter-LU actions from
FORMAT UNIT and SANITIZE. Probably SANITIZE will be per-LUN, but
FORMAT UNIT is trickier due to internal drive architecture, and how
FORMAT UNIT initializes on-disk metadata. Likely it will require some
sort of synchronization across LUNs, such as the command being sent to
both LUNs sequentially or something similar. We are also considering
not supporting FORMAT UNIT at all - would anybody object? Any other
suggestions?

Good, that is progress. [But you still only have one spindle.]

If Protection Information (PI) or changing the logical block size between
512 and 4096 bytes per block are options, then you need FU for that.
But does it need to take 900 minutes like one I got recently from S......?
Couldn't the actual reformatting of a track be deferred until the first
block written to that track?

Doug Gilbert




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux