Bcache needs to scale the dirty data in the cache over the multiple
backing disks in order to calculate writeback rates for each.
The previous code did this by multiplying the target number of dirty
sectors by the backing device size, and expected it to fit into a
uint64_t; this blows up on relatively small backing devices.
The new approach figures out the bdev's share in 16384ths of the overall
cached data. This is chosen to cope well when bdevs drastically vary in
size and to ensure that bcache can cross the petabyte boundary for each
backing device.
This has been improved based on Tang Junhui's feedback to ensure that
every device gets a share of dirty data, no matter how small it is
compared to the total backing pool.
The existing mechanism is very limited; this is purely a bug fix to
remove limits on volume size. However, there still needs to be change
to make this "fair" over many volumes where some are idle.
Reported-by: Jack Douglas <jack@xxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Michael Lyle <mlyle@xxxxxxxx>
Reviewed-by: Tang Junhui <tang.junhui@xxxxxxxxxx>
---
drivers/md/bcache/writeback.c | 31 +++++++++++++++++++++++++++----
drivers/md/bcache/writeback.h | 7 +++++++
2 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index 31b0a292a619..51306a19ab03 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -18,17 +18,39 @@
#include <trace/events/bcache.h>
/* Rate limiting */
-
-static void __update_writeback_rate(struct cached_dev *dc)
+static uint64_t __calc_target_rate(struct cached_dev *dc)
{
struct cache_set *c = dc->disk.c;
+
+ /*
+ * This is the size of the cache, minus the amount used for
+ * flash-only devices
+ */
uint64_t cache_sectors = c->nbuckets * c->sb.bucket_size -
bcache_flash_devs_sectors_dirty(c);
+
+ /*
+ * Unfortunately there is no control of global dirty data. If the
+ * user states that they want 10% dirty data in the cache, and has,
+ * e.g., 5 backing volumes of equal size, we try and ensure each
+ * backing volume uses about 2% of the cache for dirty data.
+ */
+ uint32_t bdev_share =
+ div64_u64(bdev_sectors(dc->bdev) << WRITEBACK_SHARE_SHIFT,
+ c->cached_dev_sectors);
+
uint64_t cache_dirty_target =
div_u64(cache_sectors * dc->writeback_percent, 100);
- int64_t target = div64_u64(cache_dirty_target * bdev_sectors(dc->bdev),
- c->cached_dev_sectors);
+ /* Ensure each backing dev gets at least one dirty share */
+ if (bdev_share < 1)
+ bdev_share = 1;
+
+ return (cache_dirty_target * bdev_share) >> WRITEBACK_SHARE_SHIFT;
+}
+
+static void __update_writeback_rate(struct cached_dev *dc)
+{
/*
* PI controller:
* Figures out the amount that should be written per second.
@@ -49,6 +71,7 @@ static void __update_writeback_rate(struct cached_dev *dc)
* This acts as a slow, long-term average that is not subject to
* variations in usage like the p term.
*/
+ int64_t target = __calc_target_rate(dc);
int64_t dirty = bcache_dev_sectors_dirty(&dc->disk);
int64_t error = dirty - target;
int64_t proportional_scaled =
diff --git a/drivers/md/bcache/writeback.h b/drivers/md/bcache/writeback.h
index f102b1f9bc51..66f1c527fa24 100644
--- a/drivers/md/bcache/writeback.h
+++ b/drivers/md/bcache/writeback.h
@@ -8,6 +8,13 @@
#define MAX_WRITEBACKS_IN_PASS 5
#define MAX_WRITESIZE_IN_PASS 5000 /* *512b */
+/*
+ * 14 (16384ths) is chosen here as something that each backing device
+ * should be a reasonable fraction of the share, and not to blow up
+ * until individual backing devices are a petabyte.
+ */
+#define WRITEBACK_SHARE_SHIFT 14
+
static inline uint64_t bcache_dev_sectors_dirty(struct bcache_device *d)
{
uint64_t i, ret = 0;
--
2.14.1
