Check error bits and save the exception bit when polling card busy.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/core/block.c | 37 ++++++++++++++++++++++++++++---------
1 file changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 30fc012353ae..c446d17b48c4 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1457,15 +1457,18 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq,
}
}
-#define CMD_ERRORS \
- (R1_OUT_OF_RANGE | /* Command argument out of range */ \
- R1_ADDRESS_ERROR | /* Misaligned address */ \
+#define CMD_ERRORS_EXCL_OOR \
+ (R1_ADDRESS_ERROR | /* Misaligned address */ \
R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\
R1_WP_VIOLATION | /* Tried to write to protected block */ \
R1_CARD_ECC_FAILED | /* Card ECC failed */ \
R1_CC_ERROR | /* Card controller error */ \
R1_ERROR) /* General/unknown error */
+#define CMD_ERRORS \
+ (CMD_ERRORS_EXCL_OOR | \
+ R1_OUT_OF_RANGE) /* Command argument out of range */ \
+
static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq)
{
u32 val;
@@ -2157,24 +2160,40 @@ static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq)
brq->data.error || brq->cmd.resp[0] & CMD_ERRORS;
}
+static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq)
+{
+ return !!brq->mrq.sbc;
+}
+
+static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq)
+{
+ return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR;
+}
+
static int mmc_blk_card_busy(struct mmc_card *card, struct request *req)
{
struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
- bool gen_err = false;
+ u32 status = 0;
int err;
if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ)
return 0;
- err = card_busy_detect_err(card, MMC_BLK_TIMEOUT_MS, false, req,
- &gen_err);
+ err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req, &status);
- /* Copy the general error bit so it will be seen later on */
- if (gen_err) {
- mqrq->brq.stop.resp[0] |= R1_ERROR;
+ /*
+ * Do not assume data transferred correctly if there are any error bits
+ * set.
+ */
+ if (status & mmc_blk_stop_err_bits(&mqrq->brq)) {
+ mqrq->brq.data.bytes_xfered = 0;
err = err ? err : -EIO;
}
+ /* Copy the exception bit so it will be seen later on */
+ if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT)
+ mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT;
+
return err;
}
--
1.9.1
