On Fri, Nov 10, 2017 at 08:51:58AM -0800, James Bottomley wrote: > On Fri, 2017-11-10 at 17:01 +0800, Ming Lei wrote: > > cmd->cmnd can be allocated/freed dynamically in case of > > T10_PI_TYPE2_PROTECTION, > > so we should check it in scsi_show_rq() because this request may have > > been freed already here, and cmd->cmnd has been set as null. > > > > We choose to accept read-after-free and dump request data as far as > > possible. > > > > This patch fixs the following kernel crash when dumping request via > > block's > > debugfs interface: > > > > [ 252.962045] BUG: unable to handle kernel NULL pointer dereference > > at (null) > > [ 252.963007] IP: scsi_format_opcode_name+0x1a/0x1c0 > > [ 252.963007] PGD 25e75a067 P4D 25e75a067 PUD 25e75b067 PMD 0 > > [ 252.963007] Oops: 0000 [#1] PREEMPT SMP > > [ 252.963007] Dumping ftrace buffer: > > [ 252.963007] (ftrace buffer empty) > > [ 252.963007] Modules linked in: scsi_debug ebtable_filter ebtables > > ip6table_filter ip6_tables xt_CHECKSUM iptable_mangle ipt_MASQUERADE > > nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 > > nf_nat_ipv4 nf_nat nf_conntrack libcrc32c bridge stp llc > > iptable_filter fuse ip_tables sd_mod sg mptsas mptscsih mptbase > > crc32c_intel ahci libahci nvme serio_raw scsi_transport_sas libata > > lpc_ich nvme_core virtio_scsi binfmt_misc dm_mod iscsi_tcp > > libiscsi_tcp libiscsi scsi_transport_iscsi null_blk configs > > [ 252.963007] CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0- > > rc2.blk_mq_io_hang+ #516 > > [ 252.963007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), > > BIOS 1.9.3-1.fc25 04/01/2014 > > [ 252.963007] task: ffff88025e6f6000 task.stack: ffffc90001bd0000 > > [ 252.963007] RIP: 0010:scsi_format_opcode_name+0x1a/0x1c0 > > [ 252.963007] RSP: 0018:ffffc90001bd3c50 EFLAGS: 00010286 > > [ 252.963007] RAX: 00000000ffff4843 RBX: 0000000000000050 RCX: > > 0000000000000000 > > [ 252.963007] RDX: 0000000000000000 RSI: 0000000000000050 RDI: > > ffffc90001bd3cd8 > > [ 252.963007] RBP: ffffc90001bd3c88 R08: 0000000000001000 R09: > > 0000000000000000 > > [ 252.963007] R10: ffff880275134000 R11: ffff88027513406c R12: > > 0000000000000050 > > [ 252.963007] R13: ffffc90001bd3cd8 R14: 0000000000000000 R15: > > 0000000000000000 > > [ 252.963007] FS: 00007f4d11762700(0000) GS:ffff88027fc40000(0000) > > knlGS:0000000000000000 > > [ 252.963007] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 252.963007] CR2: 0000000000000000 CR3: 000000025e789003 CR4: > > 00000000003606e0 > > [ 252.963007] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > > 0000000000000000 > > [ 252.963007] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: > > 0000000000000400 > > [ 252.963007] Call Trace: > > [ 252.963007] __scsi_format_command+0x27/0xc0 > > [ 252.963007] scsi_show_rq+0x5c/0xc0 > > [ 252.963007] ? seq_printf+0x4e/0x70 > > [ 252.963007] ? blk_flags_show+0x5b/0xf0 > > [ 252.963007] __blk_mq_debugfs_rq_show+0x116/0x130 > > [ 252.963007] blk_mq_debugfs_rq_show+0xe/0x10 > > [ 252.963007] seq_read+0xfe/0x3b0 > > [ 252.963007] ? __handle_mm_fault+0x631/0x1150 > > [ 252.963007] full_proxy_read+0x54/0x90 > > [ 252.963007] __vfs_read+0x37/0x160 > > [ 252.963007] ? security_file_permission+0x9b/0xc0 > > [ 252.963007] vfs_read+0x96/0x130 > > [ 252.963007] SyS_read+0x55/0xc0 > > [ 252.963007] entry_SYSCALL_64_fastpath+0x1a/0xa5 > > [ 252.963007] RIP: 0033:0x7f4d1127e9b0 > > [ 252.963007] RSP: 002b:00007ffd27082568 EFLAGS: 00000246 ORIG_RAX: > > 0000000000000000 > > [ 252.963007] RAX: ffffffffffffffda RBX: 00007f4d1154bb20 RCX: > > 00007f4d1127e9b0 > > [ 252.963007] RDX: 0000000000020000 RSI: 00007f4d115a7000 RDI: > > 0000000000000003 > > [ 252.963007] RBP: 0000000000021010 R08: ffffffffffffffff R09: > > 0000000000000000 > > [ 252.963007] R10: 000000000000037b R11: 0000000000000246 R12: > > 0000000000022000 > > [ 252.963007] R13: 00007f4d1154bb78 R14: 0000000000001000 R15: > > 0000000000020000 > > [ 252.963007] Code: c6 e8 1b ca 24 00 eb 8c e8 74 2c ae ff 0f 1f 40 > > 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 89 f4 > > 48 83 ec 18 <44> 0f b6 32 48 c7 45 c8 00 00 00 00 65 48 8b 04 25 28 > > 00 00 00 > > [ 252.963007] RIP: scsi_format_opcode_name+0x1a/0x1c0 RSP: > > ffffc90001bd3c50 > > [ 252.963007] CR2: 0000000000000000 > > [ 252.963007] ---[ end trace 83c5bddfbaa6573c ]--- > > [ 252.963007] Kernel panic - not syncing: Fatal exception > > [ 252.963007] Dumping ftrace buffer: > > [ 252.963007] (ftrace buffer empty) > > [ 252.963007] Kernel Offset: disabled > > [ 252.963007] ---[ end Kernel panic - not syncing: Fatal exception > > > > Fixes: 0eebd005dd07(scsi: Implement blk_mq_ops.show_rq()) > > Cc: Bart Van Assche <bart.vanassche@xxxxxxxxxxx> > > Cc: Omar Sandoval <osandov@xxxxxx> > > Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx> > > Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> > > Cc: Hannes Reinecke <hare@xxxxxxxx> > > Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx> > > --- > > V2: > > - fix typo > > V3: > > - prefer to dump data and accept read-after-free > > - add some comment > > V4: > > - read the two variable into local variable first, for avoiding > > free between check and passing to __scsi_format_command(). > > > > > > drivers/scsi/scsi_debugfs.c | 14 +++++++++++++- > > 1 file changed, 13 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/scsi/scsi_debugfs.c > > b/drivers/scsi/scsi_debugfs.c > > index 5e9755008aed..f8437c456458 100644 > > --- a/drivers/scsi/scsi_debugfs.c > > +++ b/drivers/scsi/scsi_debugfs.c > > @@ -8,8 +8,20 @@ void scsi_show_rq(struct seq_file *m, struct request > > *rq) > > struct scsi_cmnd *cmd = container_of(scsi_req(rq), > > typeof(*cmd), req); > > int msecs = jiffies_to_msecs(jiffies - cmd- > > >jiffies_at_alloc); > > char buf[80]; > > + unsigned char *cdb = cmd->cmnd; > > + unsigned short cdb_len = cmd->cmd_len; > > > > > > - __scsi_format_command(buf, sizeof(buf), cmd->cmnd, cmd- > > >cmd_len); > > + /* > > + * This rq may have been freed, so don't be surprised if > > + * read-after-free is reported. > > I said fix this in sd.c:sd_uninit_command() by setting SCpnt->cmnd to > NULL before calling mempool_free(). Hi James, That can't avoid the use-after-free in both reality and theory. When 'cdb = cmd->cmnd' is executed in CPU1, 'cbd' is a valid pointer, just after this instruction is done, this request is completed in CPU2, and mempool_free() is run to complete this buffer. Firstly, both preemption and IRQ can happen inside __scsi_format_command(), when this function is scheduled to rerun, this buffer is freed since mempool_free() has completed already, which is run in irq context. Secondly, the use-after-free can't be avoided too if we disable irq when checking and reading the variable. See following: mempool_free(cmd->cmnd) is often run much quick because we complete request on same CPU with the submission CPU(the CPU for allocation of cmd->cmnd). So from CPU1's review, cmd->cmnd is in a remote NUMA node, __scsi_format_command() is executed much slower than mempool_free(). So when mempool_free() returns, __scsi_format_command() may not fetched the buffer in L1 cache yet, then use-after-free is still triggered. That is why I say this use-after-free is inevitable no matter 'setting SCpnt->cmnd to NULL before calling mempool_free()' or not. Thanks, Ming
