Until mmc has blk-mq support fully implemented and tested, add a
parameter use_blk_mq, default to false unless config option MMC_MQ_DEFAULT
is selected.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/Kconfig | 11 +++++++++++
drivers/mmc/core/core.c | 7 +++++++
drivers/mmc/core/core.h | 2 ++
drivers/mmc/core/host.c | 2 ++
drivers/mmc/core/host.h | 4 ++++
include/linux/mmc/host.h | 1 +
6 files changed, 27 insertions(+)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ec21388311db..98202934bd29 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -12,6 +12,17 @@ menuconfig MMC
If you want MMC/SD/SDIO support, you should say Y here and
also to your specific host controller driver.
+config MMC_MQ_DEFAULT
+ bool "MMC: use blk-mq I/O path by default"
+ depends on MMC && BLOCK
+ ---help---
+ This option enables the new blk-mq based I/O path for MMC block
+ devices by default. With the option the mmc_core.use_blk_mq
+ module/boot option defaults to Y, without it to N, but it can
+ still be overridden either way.
+
+ If unsure say N.
+
if MMC
source "drivers/mmc/core/Kconfig"
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 1f0f44f4dd5f..5df03cb73be7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -66,6 +66,13 @@
bool use_spi_crc = 1;
module_param(use_spi_crc, bool, 0);
+#ifdef CONFIG_MMC_MQ_DEFAULT
+bool mmc_use_blk_mq = true;
+#else
+bool mmc_use_blk_mq = false;
+#endif
+module_param_named(use_blk_mq, mmc_use_blk_mq, bool, S_IWUSR | S_IRUGO);
+
static int mmc_schedule_delayed_work(struct delayed_work *work,
unsigned long delay)
{
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 71e6c6d7ceb7..8c5dd8d31400 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -35,6 +35,8 @@ struct mmc_bus_ops {
int (*reset)(struct mmc_host *);
};
+extern bool mmc_use_blk_mq;
+
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
void mmc_detach_bus(struct mmc_host *host);
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 35a9e4fd1a9f..62ef6cb0ece4 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -404,6 +404,8 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
host->fixed_drv_type = -EINVAL;
+ host->use_blk_mq = mmc_use_blk_mq;
+
return host;
}
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index fb689a1065ed..6eaf558e62d6 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -74,6 +74,10 @@ static inline bool mmc_card_hs400es(struct mmc_card *card)
return card->host->ios.enhanced_strobe;
}
+static inline bool mmc_host_use_blk_mq(struct mmc_host *host)
+{
+ return host->use_blk_mq;
+}
#endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index e7743eca1021..ce2075d6f429 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -380,6 +380,7 @@ struct mmc_host {
unsigned int doing_retune:1; /* re-tuning in progress */
unsigned int retune_now:1; /* do re-tuning at next req */
unsigned int retune_paused:1; /* re-tuning is temporarily disabled */
+ unsigned int use_blk_mq:1; /* use blk-mq */
int rescan_disable; /* disable card detection */
int rescan_entered; /* used with nonremovable devices */
--
1.9.1
