The SKD_ID_INCR flag in skd_request_context.id duplicates information
that is already available otherwise, e.g. through the block layer
request state and through skd_request_context.state. Hence remove
the code that manipulates this flag and also the flag itself.
Since skd_isr_completion_posted() only uses the lower bits of
skd_request_context.id as hardware tag, this patch does not change
the behavior of the skd driver. I'm referring to the following code:
tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK;
Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: Johannes Thumshirn <jthumshirn@xxxxxxx>
---
drivers/block/skd_main.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index 34188a600bfa..00a86252b3c5 100644
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -89,7 +89,6 @@ MODULE_DESCRIPTION("STEC s1120 PCIe SSD block driver");
sizeof(struct fit_comp_error_info)) * SKD_N_COMPLETION_ENTRY)
/* 5 bits of uniqifier, 0xF800 */
-#define SKD_ID_INCR (0x400)
#define SKD_ID_TABLE_MASK (3u << 8u)
#define SKD_ID_RW_REQUEST (0u << 8u)
#define SKD_ID_INTERNAL (1u << 8u)
@@ -921,9 +920,7 @@ static void skd_send_internal_skspcl(struct skd_device *skdev,
*/
return;
- SKD_ASSERT((skspcl->req.id & SKD_ID_INCR) == 0);
skspcl->req.state = SKD_REQ_STATE_BUSY;
- skspcl->req.id += SKD_ID_INCR;
scsi = &skspcl->msg_buf->scsi[0];
scsi->hdr.tag = skspcl->req.id;
@@ -1044,7 +1041,6 @@ static void skd_complete_internal(struct skd_device *skdev,
skspcl->req.completion = *skcomp;
skspcl->req.state = SKD_REQ_STATE_IDLE;
- skspcl->req.id += SKD_ID_INCR;
status = skspcl->req.completion.status;
@@ -1451,7 +1447,6 @@ static void skd_release_skreq(struct skd_device *skdev,
* Reclaim the skd_request_context
*/
skreq->state = SKD_REQ_STATE_IDLE;
- skreq->id += SKD_ID_INCR;
}
static int skd_isr_completion_posted(struct skd_device *skdev,
--
2.14.1
