Re: [PATCH 1/9] QUEUE_FLAG_NOWAIT to indicate device supports nowait

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 09, 2017 at 05:16:23PM -0500, Goldwyn Rodrigues wrote:
> 
> 
> On 08/09/2017 03:21 PM, Shaohua Li wrote:
> > On Wed, Aug 09, 2017 at 10:35:39AM -0500, Goldwyn Rodrigues wrote:
> >>
> >>
> >> On 08/09/2017 10:02 AM, Shaohua Li wrote:
> >>> On Wed, Aug 09, 2017 at 06:44:55AM -0500, Goldwyn Rodrigues wrote:
> >>>>
> >>>>
> >>>> On 08/08/2017 03:32 PM, Shaohua Li wrote:
> >>>>> On Wed, Jul 26, 2017 at 06:57:58PM -0500, Goldwyn Rodrigues wrote:
> >>>>>> From: Goldwyn Rodrigues <rgoldwyn@xxxxxxxx>
> >>>>>>
> >>>>>> Nowait is a feature of direct AIO, where users can request
> >>>>>> to return immediately if the I/O is going to block. This translates
> >>>>>> to REQ_NOWAIT in bio.bi_opf flags. While request based devices
> >>>>>> don't wait, stacked devices such as md/dm will.
> >>>>>>
> >>>>>> In order to explicitly mark stacked devices as supported, we
> >>>>>> set the QUEUE_FLAG_NOWAIT in the queue_flags and return -EAGAIN
> >>>>>> whenever the device would block.
> >>>>>
> >>>>> probably you should route this patch to Jens first, DM/MD are different trees.
> >>>>
> >>>> Yes, I have sent it to linux-block as well, and he has commented as well.
> >>>>
> >>>>
> >>>>>  
> >>>>>> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@xxxxxxxx>
> >>>>>> ---
> >>>>>>  block/blk-core.c       | 3 ++-
> >>>>>>  include/linux/blkdev.h | 2 ++
> >>>>>>  2 files changed, 4 insertions(+), 1 deletion(-)
> >>>>>>
> >>>>>> diff --git a/block/blk-core.c b/block/blk-core.c
> >>>>>> index 970b9c9638c5..1c9a981d88e5 100644
> >>>>>> --- a/block/blk-core.c
> >>>>>> +++ b/block/blk-core.c
> >>>>>> @@ -2025,7 +2025,8 @@ generic_make_request_checks(struct bio *bio)
> >>>>>>  	 * if queue is not a request based queue.
> >>>>>>  	 */
> >>>>>>  
> >>>>>> -	if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_rq_based(q))
> >>>>>> +	if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_rq_based(q) &&
> >>>>>> +	    !blk_queue_supports_nowait(q))
> >>>>>>  		goto not_supported;
> >>>>>>  
> >>>>>>  	part = bio->bi_bdev->bd_part;
> >>>>>> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> >>>>>> index 25f6a0cb27d3..fae021ebec1b 100644
> >>>>>> --- a/include/linux/blkdev.h
> >>>>>> +++ b/include/linux/blkdev.h
> >>>>>> @@ -633,6 +633,7 @@ struct request_queue {
> >>>>>>  #define QUEUE_FLAG_REGISTERED  29	/* queue has been registered to a disk */
> >>>>>>  #define QUEUE_FLAG_SCSI_PASSTHROUGH 30	/* queue supports SCSI commands */
> >>>>>>  #define QUEUE_FLAG_QUIESCED    31	/* queue has been quiesced */
> >>>>>> +#define QUEUE_FLAG_NOWAIT      32	/* stack device driver supports REQ_NOWAIT */
> >>>>>>  
> >>>>>>  #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
> >>>>>>  				 (1 << QUEUE_FLAG_STACKABLE)	|	\
> >>>>>> @@ -732,6 +733,7 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q)
> >>>>>>  #define blk_queue_dax(q)	test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)
> >>>>>>  #define blk_queue_scsi_passthrough(q)	\
> >>>>>>  	test_bit(QUEUE_FLAG_SCSI_PASSTHROUGH, &(q)->queue_flags)
> >>>>>> +#define blk_queue_supports_nowait(q)	test_bit(QUEUE_FLAG_NOWAIT, &(q)->queue_flags)
> >>>>>
> >>>>> Should this bit consider under layer disks? For example, one raid array disk
> >>>>> doesn't support NOWAIT, shouldn't we disable NOWAIT for the array?
> >>>>
> >>>> Yes, it should. I will add a check before setting the flag. Thanks.
> >>>> Request-based devices don't wait. So, they would not have this flag set.
> >>>> It is only the bio-based, with the  make_request_fn hook which need this.
> >>>>
> >>>>>  
> >>>>> I have another generic question. If a bio is splitted into 2 bios, one bio
> >>>>> doesn't need to wait but the other need to wait. We will return -EAGAIN for the
> >>>>> second bio, so the whole bio will return -EAGAIN, but the first bio is already
> >>>>> dispatched to disk. Is this correct behavior?
> >>>>>
> >>>>
> >>>> No, from a multi-device point of view, this is inconsistent. I have
> >>>> tried the request bio returns -EAGAIN before the split, but I shall
> >>>> check again. Where do you see this happening?
> >>>
> >>> No, this isn't multi-device specific, any driver can do it. Please see blk_queue_split.
> >>>
> >>
> >> In that case, the bio end_io function is chained and the bio of the
> >> split will replicate the error to the parent (if not already set).
> > 
> > this doesn't answer my question. So if a bio returns -EAGAIN, part of the bio
> > probably already dispatched to disk (if the bio is splitted to 2 bios, one
> > returns -EAGAIN, the other one doesn't block and dispatch to disk), what will
> > application be going to do? I think this is different to other IO errors. FOr
> > other IO errors, application will handle the error, while we ask app to retry
> > the whole bio here and app doesn't know part of bio is already written to disk.
> 
> It is the same as for other I/O errors as well, such as EIO. You do not
> know which bio of all submitted bio's returned the error EIO. The
> application would and should consider the whole I/O as failed.
> 
> The user application does not know of bios, or how it is going to be
> split in the underlying layers. It knows at the system call level. In
> this case, the EAGAIN will be returned to the user for the whole I/O not
> as a part of the I/O. It is up to application to try the I/O again with
> or without RWF_NOWAIT set. In direct I/O, it is bubbled out using
> dio->io_error. You can read about it at the patch header for the initial
> patchset at [1].
> 
> Use case: It is for applications having two threads, a compute thread
> and an I/O thread. It would try to push AIO as much as possible in the
> compute thread using RWF_NOWAIT, and if it fails, would pass it on to
> I/O thread which would perform without RWF_NOWAIT. End result if done
> right is you save on context switches and all the
> synchronization/messaging machinery to perform I/O.
> 
> [1] http://marc.info/?l=linux-block&m=149789003305876&w=2

Yes, I knew the concept, but I didn't see previous patches mentioned the
-EAGAIN actually should be taken as a real IO error. This means a lot to
applications and make the API hard to use. I'm wondering if we should disable
bio split for NOWAIT bio, which will make the -EAGAIN only mean 'try again'.

Thanks,
Shaohua



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux