From: Shaohua Li <shli@xxxxxx> In testing software RAID, I usually found it's hard to cover specific cases. RAID is supposed to work even disk is in semi good state, for example, some sectors are broken. Since we can't control the behavior of hardware, it's difficult to create test suites to do destructive tests. But we can control the behavior of software, software based disk is an obvious choice for such tests. While we already have several software based disks for testing (eg, null_blk, scsi_debug), none is for destructive testing, this is the reason we create a new test block device. Currently the driver can create disk with following features: - Bandwidth control. A raid array consists of several disks. The disks could run in different speed, for example, one disk is SSD and the other is HD. Actually raid1 has a feature called write behind just for this. To test such raid1 feature, we'd like the disks speed could be controlled. - Emulate disk cache. Software must flush disk cache to guarantee data is safely stored in media after a power failure. To verify if software works well, we can't simply use physical disk, because even software doesn't flush cache, the hardware probably will flush the cache. With a software implementation of disk cache, we can fully control how we flush disk cache in a power failure. - Badblock. If only part of a disk is broken, software raid continues working. To test if software raid works well, disks must include some broken parts or bad blocks. Bad blocks can be easily implemented in software. While this is inspired by software raid testing, the driver is very flexible for extension. We can easily add new features into the driver. The interface is configfs, which can be configured with a shell script. There is a 'features' attribute exposing all supported features. By checking this, we don't need to worry about compability issues. For configuration details, please check the first patch. This is William's intern project. I made some changes, all errors are mine. You are more than welcomed to test and add new features! Thanks, Shaohua Kyungchan Koh (4): testb: add interface testb: implement block device operations testb: implement bandwidth control testb: emulate disk cache Shaohua Li (1): testb: badblock support drivers/block/Kconfig | 8 + drivers/block/Makefile | 2 + drivers/block/test_blk.c | 1294 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1304 insertions(+) create mode 100644 drivers/block/test_blk.c -- 2.9.3
