Just wire up the generic TCG OPAL infrastructure to the SCSI disk driver
and the Security In/Out commands.
Note that I don't know of any actual SCSI disks that do support TCG OPAL,
but this is required to support ATA disks through libata.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
drivers/scsi/sd.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/sd.h | 2 ++
2 files changed, 46 insertions(+)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b6bb4e0ce0e3..782f909a223c 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -50,6 +50,7 @@
#include <linux/string_helpers.h>
#include <linux/async.h>
#include <linux/slab.h>
+#include <linux/sed-opal.h>
#include <linux/pm_runtime.h>
#include <linux/pr.h>
#include <linux/t10-pi.h>
@@ -643,6 +644,26 @@ static void scsi_disk_put(struct scsi_disk *sdkp)
mutex_unlock(&sd_ref_mutex);
}
+#ifdef CONFIG_BLK_SED_OPAL
+static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
+ size_t len, bool send)
+{
+ struct scsi_device *sdev = data;
+ u8 cdb[12] = { 0, };
+ int ret;
+
+ cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
+ cdb[1] = secp;
+ put_unaligned_be16(spsp, &cdb[2]);
+ put_unaligned_be32(len, &cdb[6]);
+
+ ret = scsi_execute_req(sdev, cdb,
+ send ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
+ buffer, len, NULL, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
+ return ret <= 0 ? ret : -EIO;
+}
+#endif /* CONFIG_BLK_SED_OPAL */
+
static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
unsigned int dix, unsigned int dif)
{
@@ -1454,6 +1475,9 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
if (error)
goto out;
+ if (is_sed_ioctl(cmd))
+ return sed_ioctl(sdkp->opal_dev, cmd, p);
+
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to block level and then onto mid level if they can't be
@@ -3014,6 +3038,17 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
sdkp->ws10 = 1;
}
+static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+ struct scsi_device *sdev = sdkp->device;
+
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
+ SECURITY_PROTOCOL_IN) == 1 &&
+ scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
+ SECURITY_PROTOCOL_OUT) == 1)
+ sdkp->security = 1;
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -3067,6 +3102,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
sd_read_write_same(sdkp, buffer);
+ sd_read_security(sdkp, buffer);
}
sdkp->first_scan = 0;
@@ -3227,6 +3263,12 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
sd_revalidate_disk(gd);
+ if (sdkp->security) {
+ sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit);
+ if (sdkp->opal_dev)
+ sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n");
+ }
+
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
scsi_autopm_put_device(sdp);
@@ -3376,6 +3418,8 @@ static int sd_remove(struct device *dev)
sd_zbc_remove(sdkp);
+ free_opal_dev(sdkp->opal_dev);
+
blk_register_region(devt, SD_MINORS, NULL,
sd_default_probe, NULL, NULL);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 61d02efd366c..99c4dde9b6bf 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -71,6 +71,7 @@ struct scsi_disk {
struct scsi_device *device;
struct device dev;
struct gendisk *disk;
+ struct opal_dev *opal_dev;
#ifdef CONFIG_BLK_DEV_ZONED
unsigned int nr_zones;
unsigned int zone_blocks;
@@ -114,6 +115,7 @@ struct scsi_disk {
unsigned rc_basis: 2;
unsigned zoned: 2;
unsigned urswrz : 1;
+ unsigned security : 1;
unsigned ignore_medium_access_errors : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
--
2.11.0
