Re: [xfstests PATCH v3 1/5] generic: add a writeback error handling test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2017-05-31 at 11:59 -0700, Eduardo Valentin wrote:
> Hello,
> 
> On Wed, May 31, 2017 at 09:08:16AM -0400, Jeff Layton wrote:
> > I'm working on a set of kernel patches to change how writeback errors
> > are handled and reported in the kernel. Instead of reporting a
> > writeback error to only the first fsync caller on the file, I aim
> > to make the kernel report them once on every file description.
> > 
> > This patch adds a test for the new behavior. Basically, open many fds
> > to the same file, turn on dm_error, write to each of the fds, and then
> > fsync them all to ensure that they all get an error back.
> > 
> > To do that, I'm adding a new tools/dmerror script that the C program
> > can use to load the error table. For now, that's all it can do, but
> > we can fill it out with other commands as necessary.
> > 
> > Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>
> > ---
> >  common/dmerror             |  13 ++--
> >  doc/auxiliary-programs.txt |   8 +++
> >  src/Makefile               |   2 +-
> >  src/fsync-err.c            | 161 +++++++++++++++++++++++++++++++++++++++++++++
> >  tests/generic/999          |  76 +++++++++++++++++++++
> >  tests/generic/999.out      |   3 +
> >  tests/generic/group        |   1 +
> >  tools/dmerror              |  44 +++++++++++++
> >  8 files changed, 302 insertions(+), 6 deletions(-)
> >  create mode 100644 src/fsync-err.c
> >  create mode 100755 tests/generic/999
> >  create mode 100644 tests/generic/999.out
> >  create mode 100755 tools/dmerror
> > 
> > diff --git a/common/dmerror b/common/dmerror
> > index d46c5d0b7266..238baa213b1f 100644
> > --- a/common/dmerror
> > +++ b/common/dmerror
> > @@ -23,22 +23,25 @@ if [ $? -eq 0 ]; then
> >  	_notrun "Cannot run tests with DAX on dmerror devices"
> >  fi
> >  
> > -_dmerror_init()
> > +_dmerror_setup()
> >  {
> >  	local dm_backing_dev=$SCRATCH_DEV
> >  
> > -	$DMSETUP_PROG remove error-test > /dev/null 2>&1
> > -
> >  	local blk_dev_size=`blockdev --getsz $dm_backing_dev`
> >  
> >  	DMERROR_DEV='/dev/mapper/error-test'
> >  
> >  	DMLINEAR_TABLE="0 $blk_dev_size linear $dm_backing_dev 0"
> >  
> > +	DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
> > +}
> > +
> > +_dmerror_init()
> > +{
> > +	_dmerror_setup
> > +	$DMSETUP_PROG remove error-test > /dev/null 2>&1
> >  	$DMSETUP_PROG create error-test --table "$DMLINEAR_TABLE" || \
> >  		_fatal "failed to create dm linear device"
> > -
> > -	DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
> >  }
> >  
> >  _dmerror_mount()
> > diff --git a/doc/auxiliary-programs.txt b/doc/auxiliary-programs.txt
> > index 21ef118596b6..191ac0596511 100644
> > --- a/doc/auxiliary-programs.txt
> > +++ b/doc/auxiliary-programs.txt
> > @@ -16,6 +16,7 @@ note the dependency with:
> >  Contents:
> >  
> >   - af_unix		-- Create an AF_UNIX socket
> > + - fsync-err		-- tests fsync error reporting after failed writeback
> >   - open_by_handle	-- open_by_handle_at syscall exercise
> >   - stat_test		-- statx syscall exercise
> >   - t_dir_type		-- print directory entries and their file type
> > @@ -30,6 +31,13 @@ af_unix
> >  
> >  	The af_unix program creates an AF_UNIX socket at the given location.
> >  
> > +fsync-err
> > +	Specialized program for testing how the kernel reports errors that
> > +	occur during writeback. Works in conjunction with the dmerror script
> > +	in tools/ to write data to a device, and then force it to fail
> > +	writeback and test that errors are reported during fsync and cleared
> > +	afterward.
> > +
> >  open_by_handle
> >  
> >  	The open_by_handle program exercises the open_by_handle_at() system
> > diff --git a/src/Makefile b/src/Makefile
> > index 4ec01975f8f7..b79c4d84d31b 100644
> > --- a/src/Makefile
> > +++ b/src/Makefile
> > @@ -13,7 +13,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
> >  	multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
> >  	t_mmap_writev t_truncate_cmtime dirhash_collide t_rename_overwrite \
> >  	holetest t_truncate_self t_mmap_dio af_unix t_mmap_stale_pmd \
> > -	t_mmap_cow_race
> > +	t_mmap_cow_race fsync-err
> >  
> >  LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
> >  	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> > diff --git a/src/fsync-err.c b/src/fsync-err.c
> > new file mode 100644
> > index 000000000000..cbeb37fb1790
> > --- /dev/null
> > +++ b/src/fsync-err.c
> > @@ -0,0 +1,161 @@
> > +/*
> > + * fsync-err.c: test whether writeback errors are reported to all open fds
> > + * 		and properly cleared as expected after being seen once on each
> > + *
> > + * Copyright (c) 2017: Jeff Layton <jlayton@xxxxxxxxxx>
> > + */
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include <errno.h>
> > +#include <fcntl.h>
> > +#include <stdlib.h>
> > +#include <stdio.h>
> > +#include <string.h>
> > +#include <unistd.h>
> > +
> > +/*
> > + * btrfs has a fixed stripewidth of 64k, so we need to write enough data to
> > + * ensure that we hit both stripes.
> > + *
> > + * FIXME: have the test script pass in the length?
> > + */
> > +#define BUFSIZE (65 * 1024)
> > +
> > +/* FIXME: should this be tunable */
> > +#define NUM_FDS	10
> > +
> > +static void usage() {
> > +	fprintf(stderr, "Usage: fsync-err <filename>\n");
> > +}
> 
> Just to follow the same style as your main:
> 
> +static void usage() 
> +{
> +	fprintf(stderr, "Usage: fsync-err <filename>\n");
> +}
> 
> > +
> > +int main(int argc, char **argv)
> > +{
> > +	int fd[NUM_FDS], ret, i;
> > +	char *fname, *buf;
> > +
> > +	if (argc < 1) {
> > +		usage();
> > +		return 1;
> > +	}
> > +
> > +	/* First argument is filename */
> > +	fname = argv[1];
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
> > +		if (fd[i] < 0) {
> > +			printf("open of fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	buf = malloc(BUFSIZE);
> > +	if (!buf) {
> > +		printf("malloc failed: %m\n");
> > +		return 1;
> > +	}
> > +
> > +	memset(buf, 0x7c, BUFSIZE);
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = write(fd[i], buf, BUFSIZE);
> > +		if (ret < 0) {
> > +			printf("First write on fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = fsync(fd[i]);
> > +		if (ret < 0) {
> > +			printf("First fsync on fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	/* flip the device to non-working mode */
> > +	ret = system("./tools/dmerror load_error_table");
> 
> Just assuming a hardcoded relative path?
> 

The callers in tests/ call commands with hardcoded paths like "src/", so
I figured that was OK here.

Is there some other way we should do this? I'd prefer to shell out to
the dmerror tool than reimplement it here.

> > +	if (ret) {
> > +		if (WIFEXITED(ret))
> > +			printf("system: program exited: %d\n",
> > +					WEXITSTATUS(ret));
> > +		else
> > +			printf("system: 0x%x\n", (int)ret);
> > +
> > +		return 1;
> > +	}
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = write(fd[i], buf, strlen(buf) + 1);
> 
> Why not BUFSIZE here?
> 

Good catch. It should be BUFSIZE.

> > +		if (ret < 0) {
> > +			printf("Second write on fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = fsync(fd[i]);
> > +		/* Now, we EXPECT the error! */
> > +		if (ret >= 0) {
> > +			printf("Success on second fsync on fd[%d]!\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = fsync(fd[i]);
> > +		if (ret < 0) {
> > +			/* Now the error should be clear */
> > +			printf("Third fsync on fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	/* flip the device to working mode */
> > +	ret = system("./tools/dmerror load_working_table");
> > +	if (ret) {
> > +		if (WIFEXITED(ret))
> > +			printf("system: program exited: %d\n",
> > +					WEXITSTATUS(ret));
> > +		else
> > +			printf("system: 0x%x\n", (int)ret);
> > +
> > +		return 1;
> > +	}
> > +
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = fsync(fd[i]);
> > +		if (ret < 0) {
> > +			/* The error should still be clear */
> > +			printf("fsync after healing device on fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	/*
> > +	 * reopen each file one at a time to ensure the same inode stays
> > +	 * in core. fsync each one to make sure we see no errors on a fresh
> > +	 * open of the inode.
> > +	 */
> > +	for (i = 0; i < NUM_FDS; ++i) {
> > +		ret = close(fd[i]);
> > +		if (ret < 0) {
> > +			printf("Close of fd[%d] returned unexpected error: %m\n", i);
> > +			return 1;
> > +		}
> > +		fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
> > +		if (fd[i] < 0) {
> > +			printf("Second open of fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +		ret = fsync(fd[i]);
> > +		if (ret < 0) {
> > +			/* New opens should not return an error */
> > +			printf("First fsync after reopen of fd[%d] failed: %m\n", i);
> > +			return 1;
> > +		}
> > +	}
> > +
> > +	printf("Test passed!\n");
> > +	return 0;
> > +}
> > diff --git a/tests/generic/999 b/tests/generic/999
> > new file mode 100755
> > index 000000000000..6de143d1149e
> > --- /dev/null
> > +++ b/tests/generic/999
> > @@ -0,0 +1,76 @@
> > +#! /bin/bash
> > +# FS QA Test No. 999
> > +#
> > +# Open a file several times, write to it, fsync on all fds and make sure that
> > +# they all return 0. Change the device to start throwing errors. Write again
> > +# on all fds and fsync on all fds. Ensure that we get errors on all of them.
> > +# Then fsync on all one last time and verify that all return 0.
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2017, Jeff Layton <jlayton@xxxxxxxxxx>
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > +#-----------------------------------------------------------------------
> 
> Sure you want to track the address? Maybe just remove it?
> 

Will do. I ended up copying and pasting instead of doing the "new"
script like I probably should have. I'll go back and read the docs and
make sure I get the boilerplate stuff right.

> > +
> 
> 
> 
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +    cd /
> > +    rm -rf $tmp.* $testdir
> > +    _dmerror_cleanup
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/dmerror
> > +
> > +# real QA test starts here
> > +_supported_os Linux
> > +_require_scratch
> > +_require_logdev
> > +_require_dm_target error
> > +_require_test_program fsync-err
> > +
> > +rm -f $seqres.full
> > +
> > +echo "Format and mount"
> > +$XFS_IO_PROG -d -c "pwrite -S 0x7c -b 1048576 0 $((64 * 1048576))" $SCRATCH_DEV >> $seqres.full
> > +_scratch_mkfs > $seqres.full 2>&1
> > +_dmerror_init
> > +_dmerror_mount >> $seqres.full 2>&1
> > +_dmerror_unmount
> > +_dmerror_mount
> > +
> > +_require_fs_space $SCRATCH_MNT 8192
> > +
> > +testfile=$SCRATCH_MNT/fsync-err-test
> > +
> > +$here/src/fsync-err $testfile
> > +
> > +# success, all done
> > +_dmerror_load_working_table
> > +_dmerror_unmount
> > +_dmerror_cleanup
> > +_repair_scratch_fs >> $seqres.full
> > +status=0
> > +exit
> > diff --git a/tests/generic/999.out b/tests/generic/999.out
> > new file mode 100644
> > index 000000000000..2e48492ff6d1
> > --- /dev/null
> > +++ b/tests/generic/999.out
> > @@ -0,0 +1,3 @@
> > +QA output created by 999
> > +Format and mount
> > +Test passed!
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 438c299030f2..39f7b14657f1 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -440,3 +440,4 @@
> >  435 auto encrypt
> >  436 auto quick rw
> >  437 auto quick
> > +999 auto quick
> > diff --git a/tools/dmerror b/tools/dmerror
> > new file mode 100755
> > index 000000000000..4aaf682ee5f9
> > --- /dev/null
> > +++ b/tools/dmerror
> > @@ -0,0 +1,44 @@
> > +#!/bin/bash
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2017, Jeff Layton <jlayton@xxxxxxxxxx>
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > +#-----------------------------------------------------------------------
> > +
> > +. ./common/config
> > +. ./common/dmerror
> > +
> > +_dmerror_setup
> > +
> > +case $1 in
> > +cleanup)
> > +	_dmerror_cleanup
> > +	;;
> > +init)
> > +	_dmerror_init
> > +	;;
> > +load_error_table)
> > +	_dmerror_load_error_table
> > +	;;
> > +load_working_table)
> > +	_dmerror_load_working_table
> > +	;;
> > +*)
> > +	echo "Usage: $0 {init|cleanup|load_error_table|load_working_table}"
> > +	exit 1
> > +	;;
> > +esac
> > +
> > +status=0
> > +exit
> > -- 
> > 2.9.4
> > 
> > 
> 
> 

Thanks for the review!
-- 
Jeff Layton <jlayton@xxxxxxxxxx>



[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux