Re: [PATCH 25/27] block: remove the discard_zeroes_data flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 2017-05-07 at 11:22 +0200, hch@xxxxxx wrote:
> On Tue, May 02, 2017 at 08:33:15PM -0700, Nicholas A. Bellinger wrote:
> > The larger target/iblock conversion patch looks like post v4.12 material
> > at this point, so to avoid breakage wrt to existing LBPRZ behavior, I'll
> > plan to push the following patch post -rc1.
> 
> I don't think this is safe.  If you want to do the aboe you also
> need to ensure ->execute_unmap always zeroes the data.  For actual
> files in the file backend we should be all fine, but for the block
> device case [1] and iblock we'd need to use blkdev_issue_zeroout
> instead of blkdev_issue_discard when unmap_zeroes_data is set.
> 
> [1] which btw already seems broken as it doesn't invalidate cached
> data when issuing a discard.

Mmm, for [1] that would appear to be true, but after a deeper look at
existing code I don't think this is the case.

The reason being is target backend attributes emulate_tpu and
emulate_tpws are strictly user configurable, and aren't automatically
set based upon the underlying IBLOCK block_device support for either
one.

According to pre v4.12-rc1 code, q->limits.discard_zeroes_data was only
enabled by drivers/scsi/sd.c:sd_config_discard() for
sdkp->provisioning_mode WRITE_SAME with LBPRZ = 1 or explicit ZERO, and
for NVME for devices that supported NVME_QUIRK_DISCARD_ZEROES.  Eg: Only
real DISCARD + ZERO support.

In your changes to v4.12-rc1, this logic to signal real DISCARD + zero
support for SCSI and NVMe via q->limits.max_write_zeroes_sectors has not
changed..

So AFAICT, regardless if the user sets emulate_tpu or emulate_tpws for a
IBLOCK backend, SCSI host code will have to choose sdkp->zeroing_mode
WRITE_SAME with LBPRZ or explicit ZERO, and NVMe host code will have to
chose a ctrl NVME_QUIRK_DEALLOCATE_ZEROES before
q->limits.max_write_zeroes_sectors != 0 is propagated up to target code,
and LBPRZ = 1 is signaled via READ_CAPACITY_16 and EVPD = 0xb2.

That said, simply propagating up q->limits.max_write_zeroes_sectors as
dev_attrib->unmap_zeroes_data following existing code still looks like
the right thing to do.




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux