Re: [PATCH v5 6/6] dt-bindings: mmc: Document support for partition table in mmc-card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 2, 2024 at 12:20 AM Christian Marangi <ansuelsmth@xxxxxxxxx> wrote:

> Document support for defining a partition table in the mmc-card node.
>
> This is needed if the eMMC doesn't have a partition table written and
> the bootloader of the device load data by using absolute offset of the
> block device. This is common on embedded device that have eMMC installed
> to save space and have non removable block devices.
>
> If an OF partition table is detected, any partition table written in the
> eMMC will be ignored and won't be parsed.
>
> eMMC provide a generic disk for user data and if supported (JEDEC 4.4+)
> also provide two additional disk ("boot1" and "boot2") for special usage
> of boot operation where normally is stored the bootloader or boot info.
> New JEDEC version also supports up to 4 GP partition for other usage
> called "gp1", "gp2", "gp3", "gp4".
>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>

Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux